French Technology Press Office, Inc.
Chicago, IL 60601
May 26, 2004 Kerasep Diamondâ„¢ filtering membranes resist abrasion and are suitable for clarification process of glucose syrups and extraction of fermentation broths. Multi-channel geometries make them compact and resistant to chemical constraints and aging. Manufactured with FDA-approved materials, membranes are available in cut-off sizes between nanofiltration and microfiltration.

Graymills Corporation
Chicago, IL 60613
May 14, 2004 Model OSEP-2 portable fluid-conditioning filtration system and oil/water separator removes tramp oils from water-based coolants used in machining centers. Featuring 17 gal capacity and heavy-duty casters, system can be moved throughout plant. It helps keep bacteria levels to minimum, as well as smoking caused by oils in coolant coming in contact with hot tooling. Model OSEP-2 requires 50 psi for operation; no electrical connection is needed.

RPA Process Technologies
Portage, MI 49024
May 10, 2004 Mechanically cleaned Model MCF utilizes magnetically coupled drive technology that moves 4-way, spring-loaded cleaning disc without need for external shaft or drive seals. Disc travels up and down inside filter media, removing collected contaminants. By utilizing cleanable, permanent media, downtime and filter disposal are eliminated. Filter is suited for highly viscous liquids such as paints, adhesives, resins, inks, and other similar materials.

American Meter Co. - Industrial Sales Div.
Erie, PA 16512-1251
May 05, 2004 KleanLine filters remove foreign matter from pipelines without causing substantial pressure loss. All steel, 2–12 in. KleanLine Flanged Filters remove particles as small as 10 microns. Available in 4 connection types, 2 in. KLM Miniature Filters suit low- to mid-range flow applications. Cast iron KleanLine Inline Screwed Filters, offered in 1½ and 2 in. sizes, are suited for applications up to 160 psig and remove particles as small as 5 microns.

DeVilbiss Industrial Spray Equipment, ITW Industrial Finishing
Glendale Heights, IL 60139
Apr 09, 2004 CleanAirâ„¢ Filtering Units are suited for finishing industry, where high solids and waterbornes are extremely sensitive to contaminants. Centrifugal Filter-Regulators filter out water and oil aerosols and dirt particles up to 5 microns. Coalescer Filter-Regulators remove water, dirt, and oil down to .01 micron. Three-Stage Desiccant Units offer particulate removal to 5 microns, .01 micron, and water vapor filtering to dew point of -40°F.

DuctSox
Dubuque, IA 52002
Apr 05, 2004 Designed for new or retrofit buildings with air dispersion, cone-shaped Final Filter is zippered within minutes into fabric duct system at inlet. It is available in NAFA-rated, MERV-8 or MERV-12, non-woven, 3M filter media with 50% and 90% efficiencies, respectively. Multi-layer filter media withstands pressure loading while allowing depth loading. Depending on inlet velocity, media, and sizing, filter will generate 0.24-1.98 in. wg resistance to airflow.

SMC Corporation Of America
Indianapolis, IN 46226
Mar 08, 2004 Constructed of stainless steel SUS304, environmental friendly Series FN1 Filter incorporates back-flush feature, which, along with filtration process, may be manual or automatic. Cylindrical or step element is constructed of grooved filter plates and wave washers placed one above other and compressed by compact cylinder. Element lengths are 250 and 500 mm with respective flow rates of 40 and 80 lpm at 20 micron filtration.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Feb 17, 2004 DUOLINEâ„¢ Bag Filters consist of 2, double length, single bag filter housings linked together with ball or butterfly valve switching system. When bag in one filter housing requires changing, flow can be diverted to other housing by opening and closing valves. Single movement of operating handle opens and closes 4 valves at once, so there is no danger of flow being shut down. Filters come in carbon steel or stainless steel with 2 or 3 in., 150 lb ANSI flanged connections.

Filtration Technology Corporation
Houston, TX 77041
Feb 12, 2004 Series 600 DEEP PLEAT consists of multi-media filter bags that handle particulates from 0.9–38 microns. Dirt holding capacity is maximized by pleating several different filter media together in single pleat pack. Standard bags are polypropylene or polyester and designed to fit into existing filter housings as retrofit replacement without hardware modifications. Different filter media is available to meet specific industry or plant standards.

Airguard Industries, Inc.
Louisville, KY 40218
Jan 30, 2004 Suitable for pulse-jet dust collectors, cartridges are made with 100% spun-bond polyester media. Media filters fine particulates, has good dust-cake release characteristics, and resists abrasion. Cartridges are washable for repeated use and resistant to many acids, alkalis, oxidizing agents, and solvent.

Airguard Industries, Inc.
Louisville, KY 40218
Jan 26, 2004 Microguard 99 Filters eliminate particles down to 0.3 microns with efficiencies of 99.97, 99.99, and 99.999%. Microglass fiber media is waterproof and heat-resistant to 1,000°F. Corrugated aluminum separators allow maximum use of media and high filter pack integrity. Classified UL Class 1, Class 2, and 586, filters are suited for environments such as health care, pharmaceutical, semiconductor, laboratory, chemical processing, aerospace, and film processing.

Mott Corporation
Farmington, CT 06032 3159
Jan 07, 2004 GasShield Gasket Filter is compatible with inert and specialty gases and provides filtration in gas flows as low as 1 slpm. It protects particle-sensitive gas control components and withstands extreme operating conditions. Unit fits inside ¼ in. face seal fittings, porous element is 1 in. long, and it can be installed without design change to gas delivery system. All-metal filter, available in NanoMetal® Nickel Media, provides 0.003 µm filtration.

Filtration Products Corp.
Hamel, MN 55340
Dec 31, 2003 Series 22 Tank-Mounted Filter is nominally rated at 100 gpm and available with wide range of porting and media options. Lid design eliminates tendency for debris or snow and ice to accumulate on top of housing, making replacement of filter element easier in extreme outdoor environmental conditions. Tank-mount design eliminates leak points. Filter is suited for both mobile and industrial applications.

Menardi
Trenton, SC 29847
Dec 31, 2003 Offered in bag or cartridge configurations, Mikro-Pleatâ„¢ filters are made of spunbond nonwoven filter media that is resistant to temperature, moisture, and abrasion. Their density promotes surface filtration of dust and release of collected particulate. Surface treatments include metalized, oil- and water-repellent, and Mikrotex© PTFE laminate finishes. Where static discharge is an issue, versions with stainless steel or copper ground wires are available.

Ruddux Corp.
Basking Ridge, NJ 07920
Dec 04, 2003 Portable Model 50-C treats water-based coolants in individual machine sumps. Suction strainer, pump, and coalescer mount on portable platform and are served by Ruddy Duck Deep Skimmer that is placed on coolant surface. Top ½ in. of contaminated coolant is removed (free oil and cream phases), and delivered to coalescer for oil separation. System operates unattended and treats in sump, at sump, in central tank, or any combination of these modes.

ISOPur, A Div. Of Mag Systems, Inc.
Cheshire, CT 06410
Nov 17, 2003 Series I-600, with tank sizes up to 5,000 gal, features Balanced Charge Purification technology, which purifies hydraulic and lubricating oil to sub-micron level. BCP eliminates adhesive or hard particles that create varnish and sludge that can build up in servo valves, control valves, bearings, metering orifices, regulators, and seals. I-600 system transforms lubricating oil into asset that can be used again and again without replacement.

Tema Systems, Inc.
Cincinnati, OH 45249
Nov 06, 2003 In-line Guard Screens have compact design that guards against blockages and damage caused by debris. They are manufactured in self-cleaning, non-blinding, stainless steel wedgewire in various screen diameters. Bolted flange design enables replacement of internal screen cartridge, and custom screen apertures remove only unwanted sizes of debris. Discharge outlet removes unwanted particles from process, allowing screened product to continue through pipeline.

Mokon Div., Protective Closures LLC
Buffalo, NY 14207
Sep 19, 2003 ClearFlo continuously filters heat transfer fluids, removing particles as small as 10 microns, without disrupting system operation. It reduces deterioration of rotating parts, including pump rotors, impellers, seals, valves, and stems. ClearFlo PLUS filters cool oil reservoir and removes particles as small as 1/10 micron to reduce fluid contamination and water build-up, minimizing shutdowns caused by water vapor pockets.

Ona America, Inc.
Dayton, OH 45402
Sep 10, 2003 AQUA PRIMA Series AK-100 is automatic and self-cleaning. It uses mineral filter unit especially for wire EDMs and does not require filter media replacement. Featuring 300 gal tank capacity, stainless steel, stand-alone unit takes dirty water from machine and filters it to 3-micron cleanliness level to supply clean water for machining. It uses automatic EkoAdd metering tank, which reduces resin consumption. Automatic sludge discharge is fully controlled by PLC.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Aug 27, 2003 Duplex Filter is designed around two MAXILINE SE 12-bag filter housings linked with butterfly valve control assembly. System operator can switch flow from one filter housing to the other for filter changeout without shutting off flow. QIC-LOCK® cover with spring assist allows operator to open or close cover in 15 seconds with only finger tip effort. Duplex Filter is offered in carbon steel or stainless steel with 3–36 bags per filter.