MRG Labs    York, PA 17404
Aug 16, 2011 With 1 g of grease, Grease Thief® Sampling Kits give users approved ASTM standard practice for sampling critical grease lubricated equipment and ensuring trendable analysis. Samplers can be used with Kittiwake's ANALEXfdMplus ferrous debris analyzer for rapid wear level determination. In Grease Thief Analyzer, sampling devices are connected to extrusion die for consistency evaluation and sample preparation to obtain insight into wear, consistency, contamination, and oxidation condition.

Andax Environmental Corp.    St. Marys, KS 66536
Aug 15, 2011 Designed to roll up and be carried to source of leak, Weighted Spill Tray(TM) is constructed of heavy-duty, safety orange material with sealed in weights on both sides to anchor tray where it is placed. Field-replaceable, oil-selective, multi-layered absorbent pad with leak-proof bottom facilitates cleanup. Suitable for indoor or outdoor use, Weight Spill Tray contains leaks under trucks, heavy equipment, and machinery, as well as on job sites and shipping docks.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Aug 12, 2011 Footswitch-activated NanoCool Cell Delivery System delivers injections from 367.4 pL/min to 1.906 mLpm and provides up to 11 lb adjustable force. Programmable methods, up to 100 of which can be stored, enable automatic recall of entire cell delivery protocol. With preprogrammed bolus injection mode, users are only required to specify injection size and time of dispense. Maintaining cells at 18°C reduces O2 consumption, and flow ramping reduces injection site blowback.

Styron    Berwyn, PA 19312
Aug 12, 2011 Blending polycarbonate and polyethylene terephthalate, EMERGE(TM) PC/PET 9100CR withstands repeated exposure to variety of aggressive chemicals, including surface disinfectants and cleaners commonly used in medical industry. UV light resistance helps minimize potential for color shift, loss of surface gloss, and property performance over time. Available in Natural and custom color options, resin produces aesthetic housings while offering stress-crack resistance.

Rockwood Manufacturing Co., Inc.    Rockwood, PA 15557
Aug 08, 2011 Key operated from outside with turn piece on inside, LP Series integrates contemporary postmount style door pull with deadbolt locking system. Cylinder and thumbturn location eliminates physical strain when locking and unlocking, while design facilitates mounting. Able to be used on multiple swinging and sliding door types, product can incorporate Yale® 1109 rim cylinder or Yale K680 SFIC housing or be provided without cylinder. Multiple locking options and custom sizes are available.

Surface Guard, Inc.    Aurora, IL 60504
Aug 05, 2011 Featuring slight difference in adhesion strength, Surface Guard® 132 and 133 provide temporary protection of painted metals and plastics. Both feature polyolefin film coated with water-based acrylic adhesive system, and exhibit low adhesion build over time when used with stainless steel, polycarbonate, acrylic, painted metal, and bright aluminum surfaces. When protection is no longer needed, products are removed with quick release. Sizes range from 1-80 in. W in roll lengths up to 15,000 ft.

Process Control Corp.    Atlanta, GA 30340
Aug 04, 2011 Providing precise batch-to-batch dispensing and consistent homogenous blending, Guardian® Series 2 features color touchscreen, removable cartridge V-gate metering, segmented material hoppers, integral drain chute, and no dead zone mixing chamber. Units can be configured with 4-12 ingredient hoppers, with each hopper capable of running 0-100% of recipe with dispensing accuracy up to ±0.02%. Comprised of 1.25/2.5, 5, 12, and 18/25 kg models, Series offers throughput rates over 10,000 pph.

IDI Composites International    Noblesville, IN 46060
Jul 29, 2011 Consisting of single and hybrid chemistries using polyester, vinyl ester, polyurethane, and epoxy resins, Engineered Structural Composites experience little or no degradation in extreme hot and cold temperatures, making them suited for most demanding industrial and outdoor environments. Products maintain rigidity, resist corrosion, and can be molded using variety of standard processes and tools. Composites are available as both Sheet Molding Compounds and Bulk Molding Compounds.

Abtech Industries    Scottsdale, AZ 85251
Jul 29, 2011 As self-contained, disposable, 55 gal drum filter system, Smart Sponge 55 is used for treatment of hazardous contaminated waste water in chemical shipping, ground water remediation, and energy sectors. It does not require any human contact with spent filter material; entire treatment unit can be disposed of in appropriate disposal site as solid waste once all water has been drained. Quick couplings speed disconnection of spent unit and connection of new unit.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jul 26, 2011 Utilizing carbon-impregnated media designed for use where conveyed dusts generate static charges that require dissipation, HemiPleat® Filter delivers average filtration efficiency of 99.99% on particles 0.5 microns and larger by weight. Filter combines conductive properties with open-pleat design that optimizes airflow through cartridge. With media resistance levels less than 1 MW/sq (106), HemiPleat® filter meets NFPA and ATEX requirements.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 26, 2011 Designed for use with abrasive products in pneumatic transfer applications, magnetic separation solution has housing comprised of 2 door-mounted magnetic plates positioned on opposing sides of stainless steel tube matching existing diameter of processing line. This design maintains existing flow rate, eliminating wear points within magnetic housing. Dual-magnet design reaches through entire product stream and captures metal contaminants from flow.

Ensinger    Washington, PA 15301
Jul 25, 2011 Since blue does not widely occur naturally in food chain, TECAFORM® FG Blue was designed so that food equipment components machined from this material will be picked up by optical inspection systems if part breaks during operation. Manufactured from FDA, USDA, and 3A Dairy compliant resin, material is resistant to hot water and most cleaning chemicals. It is used for bushings, rollers, and other components requiring low moisture absorption, chemical resistance, and dimensional stability.

Stratasys, Inc.    Minneapolis, MN 55344 2020
Jul 21, 2011 Intended for use by Fortus 400mc and 900mc additive manufacturing systems, ABS-ESD7 has static dissipative properties for applications where static charge can damage products, impair performance, or cause explosion. Material also eliminates attraction and buildup of particulate, such as dust or powders, and helps avoid attraction of atomized liquid. Targeted applications include assembly aids designed to hold, handle, or carry electronics safely.

Kason Corporation    Millburn, NJ 07041
Jul 19, 2011 Intended for food, dairy, pharmaceutical, and chemical applications, Centri-Sifter® features 3-bearing shaft that cantilevers for removal of internal components. External roller bearings located at motor end of shaft and on hinged cover at discharge end provide maximum support and vibration-free operation under heavy loads. Equipped with Clean-In-Place Spray Balls for rapid sanitizing using steam or cleaning solution, stainless steel unit is finished to industrial, 3-A, FDA, and BISSC standards.

Eriez Magnetics    Erie, PA 16506
Jul 12, 2011 Using ballistics to separate iron-rich ferrous from mixed metals and waste material in post drum magnet flow, Shred1(TM) Separator delivers 3 distinct fractions. Fraction 1, representing 60-80% of flow, contains less than .2% copper and does not require picking. Fraction 2 represents 20-30% of flow and contains mostly mixed metals, copper, and aluminum with steel housings or cores. Containing 5-7% of flow, Fraction 3 consists of heavy steel objects and light material, such as fluff and rubber.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jul 12, 2011 Available in 48 and 60 in. diameters with 5 hp motor, Super MX Separator delivers forces as high as 10 G and is suited for separating solids from liquids or segregating dry materials into various sizes. Machine utilizes conical construction rather than flat plates, which creates rigid geometric structure. Totally enclosed weight guard prevents reach-in injuries, while open base design allows for cleaning underneath unit, preventing dirt and product build-up.

Witte Co., Inc., The    Washington, NJ 07882
Jul 08, 2011 Combining vibrating fluid bed dryer, cooler, classifier, and integral baghouse collector, Sugar Drying System features 100% sanitary stainless steel construction for both structural and product contact areas to withstand frequent washdowns and resist corrosion. Sealed design sets baghouse directly atop dryer to capture fine particles entrained in airstream and return them to process as finished product without allowing any to escape as ambient dust.

Milliken & Co.    Spartanburg, SC 29304
Jul 07, 2011 Intended mainly for use in polypropylene compounds, Hyperform® HPR-803i can be used to partly or fully replace talc. Parts using reinforcing agent have balance of stiffness and impact strength as well as surface finish that is resistant to scratching. Available as free-flowing powder that can be incorporated during compounding via side-feeder, Hyperform HPR-803i is suited for automobile interior applications.

EMI Supply, Inc.    Concord, NC 28027
Jul 07, 2011 Originally designed for use in central air systems, on fire and floor restoration jobs, and in sewage facilities, ClenAir Odor Neutralizer Gel Tubs eradicate stubborn odors, even those that have built up over time such as cigarette or pet odor, without lingering antiseptic or perfume smell. Available in variety of sizes from ½-3 lb, tubs are biodegradable and non-toxic. Unscented, cherry scented, and orange scented versions are available.

Forsta Filters, Inc.    Los Angeles, CA 90028
Jul 05, 2011 Providing corrosion resistance in brackish, brine, and seawater filtration applications, FRP Series features wetted components constructed from plastic and high alloy materials. Filters are available with on-line or in-line flange configuration and are rated to 150 psi. Supporting working pressures from 35-150 psi and flow rate from 15-20,000 gpm, filters use coarse screens for straining large debris and fine screens for purifying water to designated 5-4,000 micron rating.