Chemicals & Chemical Processing

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Filter Carts offer optional fluid sampling system.

April 28, 2016

MFD Mobile Filtration Device Carts are available with optional HY-TRAX® Fluid Sampling System, which includes TestMate® Contamination Monitor | TCM particle counter to visually see fluid's ISO codes while cart is in operation. Dedicated sampling pump provides required pressures for accurate particle counts. HY-TRAX® option is also available as complete kit with all necessary... Read More

Chemicals & Chemical Processing, Materials & Material Processing

Kraton is "Stretching the Limits" in the Design and Construction of Personal Care Products at the IDEA 2016 Expo

April 28, 2016

HOUSTON and BOSTON - Kraton Performance Polymers, Inc. (NYSE: KRA), a leading global producer of styrenic block copolymers, specialty polymers and high-value performance products derived from pine wood pulping co-products, announces plans to exhibit at IDEA 2016. The Kraton team will be available at booth #752, May 3rd-5th at the Boston Convention Exhibition Center in Boston, Massachusetts.... Read More

Chemicals & Chemical Processing, Green & Clean

MagneGas Selected for Two Major Hotel Construction Projects in Florida

April 26, 2016

MagneGas2® Selected by Sub-contractor for Use in Two Hotel Construction Projects in Clearwater Beach, Florida TAMPA, Florida - MagneGas Corporation ("MagneGas" or the "Company") (NASDAQ: MNGA), a leading energy and technology company that counts among its inventions a patented process that converts liquid waste into MagneGas® fuel, today announced that its cutting fuel is being used by... Read More

Chemicals & Chemical Processing, Materials & Material Processing

Air Products to Feature Nitrogen and Oxygen Supply Systems for Laser Assist Gas at LME 2016

April 26, 2016

LEHIGH VALLEY, Pa., - Air Products (NYSE: APD) understands that a reliable assist gas supply is critical to keep a laser cutting operation running without interruption. For this reason, the company offers a full spectrum of nitrogen and oxygen assist gas systems, which the company will feature at the Lasers for Manufacturing Event (LME) 2016 in Atlanta from April 26-27. Laser operators are... Read More

Chemicals & Chemical Processing, Test & Measuring Instruments

Sampling Conditioner removes moisture at sampling point.

April 21, 2016

Available with E Instruments portable emissions analyzers, Sample Conditioning Unit mounts directly at sampling probe exit before sampling hose. Functionality minimizes NOx and SOx loss from condensation and fosters accurate NO2 and SO2 measurements below 10 ppm. Read More

Chemicals & Chemical Processing, Materials & Material Processing

Dry Ice Pelletizer features closed chamber technology.

April 19, 2016

By supplying up to 265 lb of dry ice pellets on demand, PR120H Pelletizer caters to regional/low volume dry ice producers. Heat exchanger provides efficient liquid CO(2) consumption to dry ice output ratio, while stainless steel enclosure creates moisture-free environment, ensuring 3-minute startup time and reducing noise levels to 75 db(A). Integrated panel PC with built-in 7 in. touchscreen... Read More

Chemicals & Chemical Processing, Green & Clean, HVAC

Packaged Gas Scrubber removes >99% rail car vent emissions.

April 19, 2016

Able to handle single as well as multiple sources with large variations in venting rates with equal efficacy, ScrubPac™ VentClean™ System can remove over 99% of storage tank and rail car vent emissions caused by breathing and filling operations. Packaged scrubber system uses triple action scrubbing technology and comes in 4 sizes to handle gas capacities from 0–1,500 acfm.... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Materials & Material Processing

SCF Delivery System supports large molding applications.

April 18, 2016

Designed for foaming of large injection molding applications >2,500–12,500 g, MuCell® T-400 Series Super Critical Fluid Dosing and Delivery System is capable of delivering 50 g of nitrogen in 45 second cycle and is intended for molding machines with screw sizes greater than 90 mm. System produces gas on demand only, minimizing energy consumption and maximizing booster pump life. Equipped... Read More

Chemicals & Chemical Processing, Green & Clean

Bosch Introduces New Generation of Pure Steam Generators and Distillation Units to the Market

April 18, 2016

Optimized performance and energy efficiency

  • Focus on sustainability
  • Preheater reduces heating energy consumption by up to 30 percent
  • Modularization leads to shorter delivery times
Bosch Packaging Technology has developed a new generation of pure media systems with optimized performance and energy efficiency, including pure steam generators and distillation... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Test & Measuring Instruments

User-Serviceable Photometers optimize filter testers.

April 15, 2016

Designed to retrofit to Model 8127 and 8130 filter testers, Model 8177 User-Serviceable Photometers feature solid-state laser diodes and fast response and purge times. Upstream and downstream photometers can be cleaned by trained technician on site in less than 1 hour, minimizing downtime. Capable of measuring filtration efficiencies up to 99.999%, automated filter testers are 42 CFR 84, EN 143,... Read More

Chemicals & Chemical Processing, Materials & Material Processing

Versum Materials(TM) Makes Debut; will Showcase Broad Range of Additives that Enable High-Performance Coatings at 2016 American Coatings Show

April 13, 2016

Expo Will Mark First Appearance of New Brand for Air Products' Materials Technologies Business LEHIGH VALLEY, Pa. - Attendees looking for the distinctive green Air Products (NYSE: APD) logo at the 2016 American Coatings Show (ACS), April 11-14, Indianapolis, Ind., will instead find the company's market-leading portfolio of epoxy curatives, resins and diluents, and additives for industrial... Read More

Chemicals & Chemical Processing

Centrifugal Sifter achieves rates to 100 tons/hour.

April 8, 2016

On continuous basis, Model K1350C removes oversize foreign matter and agglomerates from on-size material at rates to 100 tons/hr. System features cantilevered 3-bearing shaft design with bearings at motor end of shaft and on exterior of discharge end cover, providing maximum support for heavy loads. Forward and lift access door on gas struts optimizes interior access. Sifter is available in... Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment, Green & Clean, Materials & Material Processing, Non-Industrial Products

The Green Cleaning No Chemical Alternative

April 8, 2016

The CleanCore™ Aqueous Ozone Fill Station is a green alternative to using conventional cleaning chemicals.  Perfect for everyday cleaning, the system connects directly to a water pipe, and with its unique and patented mixing chamber, combines the natural elements of water and oxygen. This creates aqueous ozone which can be used to clean restroom fixtures, counters, walls, carpets, floors -... Read More

Chemicals & Chemical Processing, Green & Clean, HVAC, Materials & Material Processing

Maintech Resources Completes RTO Installation

April 8, 2016

Maintech Resources recently completed the installation of a RTO in the Los Angeles area for a manufacturing facility to meet the SCAQMD (South Coast Air Quality Management District) Regulations. This Green project used state of the art air pollution control technology in order to treat the exhaust gas from a manufacturing facility, including hazardous air pollutants and volatile organic... Read More

Chemicals & Chemical Processing, Materials & Material Processing

Polyurethane Gel Casting Resin Formula features non-tack surface.

April 8, 2016

Fostering design freedom for product engineers, NTG-9 allows production of stand-alone polyurethane gel parts in mold without prefabrication of flexible film/laminate material. Viscosity values of component materials allow facilitated handling and replication of mold surface at high resolution. Able to be processed at room temperature in ambient pressure molds, formula serves applications... Read More

Chemicals & Chemical Processing, Paints & Coatings

Thermal Insulative Acrylic Coating minimizes CUI risk.

April 6, 2016

By enabling dangerously hot systems like piping and ductwork to stay cool to the touch, Heat-Flex® 3500 prevents burns and protects personnel. Product can be applied to ambient or hot surfaces up to 350°F, minimizing downtime. Insulative and anti-corrosive properties enable plant owners to eliminate concerns related to corrosion under insulation (CUI). Available in white and slate... Read More

Chemicals & Chemical Processing, Green & Clean, Materials & Material Processing, Paints & Coatings

Dow Expands Boundaries with Customers at 2016 American Coatings SHOW

April 6, 2016

Industry experts from Dow showcase new rheology modifiers and other innovations developed to solve industry challenges PHILADELPHIA – The Dow Chemical Company (NYSE: DOW) is answering the dynamic needs of coatings formulators, manufacturers, regulators and applicators with the latest innovations to help solve their most critical challenges at the 2016 American Coatings SHOW April 12-14, 2016 at... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Materials & Material Processing

Heavy-Duty Rotary Screen minimizes downtime with extended service.

April 5, 2016

Designed for blast machines operating in heavy-duty environments, HD Rotary Screen sifts out larger chunks of debris, such as core lumps, ahead of airwash and/or magnetic separation during abrasive cleaning cycle. Construction of this hard-wearing rotary screen, designed for extended service life, contributes to sturdiness via use of hard steels in strategic locations,... Read More

Chemicals & Chemical Processing

Washdown Duty Ribbon Blenders

April 5, 2016

Hauppauge, NY – Ross offers truly washdown duty Ribbon Blenders in many standard sizes from ½ to 1000 cu.ft. Pictured is a 1-cu.ft. stainless steel model equipped with all washdown components including the motor, safety limit switch, variable frequency drive, stuffing boxes and knife gate discharge valve. The dust-tight cover includes a charging port with safety grating and the U-shaped... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Paints & Coatings

Sherwin-Williams Awarded the Steel Tank Institute's 2015 Affiliate New Product of the Year Award for New Envirolastic® Polyaspartic Urethanes

April 5, 2016

Polyaspartic Technology Provides Adhesion and Corrosion Resistance, Color and Gloss Retention CLEVELAND, OHIO – Sherwin-Williams Protective Marine Coatings was awarded the Steel Tank Institute (STI) 2015 Affiliate New Product of the Year for its EnviroLastic® Polyaspartic coatings at STI’s annual meeting in partnership with the Steel Plate Fabricators Association. The foundation of the... Read More