Bestobell Steam Div. Of Richards Industries    Cincinnati, OH 45209 2329
May 17, 2002 GCR07 thermostatic capsule steam trap features brass body with stainless steel internals. It is designed for pressures up to 230 psi and temperatures up to 390 deg F. Maximum operating pressure is 145 psi, and maximum differential pressure is 100 psi. Sizes range from 3/8 to 3/4 in. with NPT end connections.

Serfilco, Ltd.    Northbrook, IL 60062
May 16, 2002 Series HF filter chambers offer high capacity filtration by holding 26 filter cartridges of 20, 30, 40, or 50 in. lengths, and allow for flows to 400 GPM. Chambers provide non-metallic solution contact, and can handle temperatures up to 140 deg F. Pressure drop is rated to 4 psi at 200 GPM. Complete with 0 to 60 psi gauges with guards, air vent valves, and drain ports, they feature T handle cover closures which require no tools for cartridge changeover.

Tra-Con, Inc.    Bedford, MA 01730
May 14, 2002 Tra-Bond 2106T snap cure epoxy is recommended for use in lower temperature or wet industrial bonding applications that require fast cure. It offers low shrinkage, and excellent mechanical and electrical properties. Epoxy provides resistance to water, galvanic action, petroleum fuels, and many chemicals. It develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, and masonry.

Wayne Products Inc.    Frazer, PA 19355
May 14, 2002 Mini & MAXI-Skimmers(TM) lift and remove unwanted floating tramp oils from metalworking coolants, parts washing machines, pressure spray operations, oil leakage pits, waste-water, and water treatment tanks. All have timer, ground fault interrupter, handle, extension hose to aid oil collection, and mounting fasteners. Optional accessories include adjustable stand to discharge oil into 55 gal drum and oil/water separators to recycle host fluid and provide 100% oil.

Hayward Industrial Products, Inc.    Elizabeth, NJ 07207
May 14, 2002 Wright-Austin Series 30L removes entrainment, 10 microns or larger, from air, gas, and steam lines. Eleven configurations are available, plus vertical and horizontal installations with numerous inlet and outlet configurations. Vortex containment plate system uses carefully placed rings that shield separated liquid from vortex action within separator and directs it to drain, preventing re-entrainment.

Oil Skimmers, Inc.    Cleveland, OH 33092
May 10, 2002 Model 6-V continuously removes oil and animal and vegetable fats from water in tanks, ponds, and sumps. Fats and oils adhere to closed-loop tube which snakes over and around debris. System lifts tube with oily residue and scum out of water, removes oils with scrapers, and returns clean tube to water surface. It works at below freezing temeperatures, outdoors or in-plant, with lifespan of more than 20 yr.

Alar Engineering    Mokena, IL 60448
May 10, 2002 Auto-Vac filter removes suspended solids and dewaters sludges from air flotation units, clarifiers, wet scrubbers, flocculators, chemical precipitation, process liquors, paint spray booths, and cutting tables. It is self-cleaning with every revolution. Diatomaceous-earth filter media removes solid particles as small as 0.5 micron from liquid. Solids are continuously removed from surface of filter media by Stellite Knife blade.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 10, 2002 Loctite(R) 3345 ultra-violet (UV) cure medical grade adhesive bonds metal to glass. Offering sterilization resistance, product is suitable for applications such as needle assemblies, syringes, oxygenators, filters, and reusable medical devices where limited repeat steam sterilization is required. Loctite 3345 single-component, acrylic adhesive complies with ISO-10993 biocompatibility requirements. It is available in 25 ml syringe package.

Scapa North America    Windsor, CT 06095
May 09, 2002 Dublfilm(R) S972A thin polyester film is double coated with silicone pressure sensitive adhesive. Offering chemical resistance, film provides excellent adhesion to silicone coated substrates and high initial tack. It is highly conformable and includes specially treated polyester release film, making it easy to unwind. Film is suitable for silicone foam and gasket bonding, high or low temperature gasket sealing, and forming of intricate parts.

Pannevis, Inc.    Rockaway, NJ 07866
May 08, 2002 RT(R) filter can be used with either hot-gas drying or infrared drying. Filter is available in open, fume tight, gas tight, and pressure tight configurations, and with full sanitary configuration to meet cGMP requirements. For hot-gas drying, segmented tray design makes it easy to use specific tray sections as hot gas drying zones. Hot gas can be air, nitrogen, or steam. Infrared drying can be used with less permeable cakes that tolerate higher drying temperatures.

Kleerdex Company    Mount Laurel, NJ 08054
May 08, 2002 Fire rated Kydex(R) compounds include 10 injection molding and 20 extrusion grades carrying fire ratings of UL Std 94 V-0/5V, FAR 25.853 (a) and (d), ASTM E-162, ASTM E-84, UL 723, UL 2043, UL 756C and/or Class 1/A. Also available are UL 705-rated grades meeting above-the-ceiling air plenum smoke release requirements. Compounds have impact resistance to 18 ft-lb/in., tensile strength to 6500 psi, flexural strength to 9400 psi, and flexural modulus to 326,000 psi.

Filterspun    Amarillo, TX 79107 7911
May 08, 2002 Automatic Gravity Filtration System is designed to filter intermittent or continuous, high or low flows with constant or varying, heavy or light contaminant loads. Models are available from 16.5 to 1.5 sq ft of filtration surface. Automatic indexing fabric filters are suited for filter grinding swarf, machining oils and coolants, cooling tower water, industrial wastewater streams, and water wall paint booths.

RPA Process Technologies    Portage, MI 49024
May 08, 2002 AFR Series design replaces multiple valves found in systems with single rotating diverter. Actuator design provides more power and torque than original AFR, and is rated for more rotations. Optional 6 in. tubes enable unit to address filtration at low retentions and high flows. They are suitable for flow capacity at low, flow-restricting retentions of less than 100 microns.

CSC Scientific Co., Inc.    Fairfax, VA 22031
May 07, 2002 World Class line of Standard Sieves includes all stainless steel working test sieve. Unique fillet design makes sieve easy to clean and keeps mesh taut. Unit comes with a certificate of ASTM E-11 conformity and serial number.

Rotex, Inc.    Cincinnati, OH 45223 1845
May 06, 2002 MEGATEX(TM) 100 Series is for screening sand, salt, soybeans, rice, limestone, potash, slate, plastic pellets, roofing granules, and urea. They are available in two sizes and two configurations: M2120 model has 120 sq ft of total screen area while three-deck M3180 model has 180 sq ft of total screen area. MG configuration, for applications as fine as 850 microns, handles capacities of 200 to 500 tons/hour. MA configuration is for high capacity screening as fine as 200 microns.

Specialty Silicone Products, Inc.    Ballston Spa, NY 12020
May 06, 2002 TUFSIL(R), offered in range of hardness from 30 to 80 durometer (Shore A), can be blended to provide intermediate hardnesses. Rubber cures with addition of platinum based catalyst. Applications include components of respiratory masks, tubing, and other parts that come in contact with skin, or used in health care and food processing industries. Product meets strict ISO and United States Pharmaceutical (USP) Class VI standards.

Scapa North America    Windsor, CT 06095
May 03, 2002 Dublfilm(R) S972A thin polyester film is double coated with silicone pressure sensitive adhesive system for use on silicone substrates and other difficult to bond surfaces. Highly conformable, it has quick stick and strong holding power, making it suitable for automotive applications such as silicone foam and gasket bonding, high or low temperature gasket sealing, precision die cutting and forming of intricate parts, and general purpose bonding.

Benko Products Inc.    Sheffield Village, OH 44054
May 02, 2002 Sahara combination Drum Crusher/In-Drum compactor reduces waste volumes for safe and economical disposal. Explosion proof construction makes it suitable for use in NFPA Class 1 Division 1 areas. It has stainless steel construction, removable floor for forklift handling of heavy drums, and quick change head for easy conversion to in-drum compacting mode.

Edwards Vacuum Technology    Wilmington, MA 01887
May 02, 2002 XDD1 dry-vacuum diaphragm pump can be used as stand-alone unit or part of modular system. It pumps down to <2 mbar with pumping speed of 1.2 cubic meters per hour. Universal voltage motor covers 100 to 120 V and 200 to 230 V, allowing user to select required voltage. Integral silencer is fitted to exhaust, ensuring minimum disruption from noise. Pump is packaged in 312 x 144 mm housing and is suitable for bench-top applications.

Retsch, Inc.    Irvine, CA 92614
Apr 30, 2002 PT 100 Sample Divider ensures that sample represents entire bulk instead of random samples taken out of buckets with spatulas or spoons. Rotating rifflers spilt up to 5 L of inhomogeneous samples with wide particle size distribution into 6, 8, or 10 representative sub-samples. DR 100 Vibratory Feeder ensures that divider is centered over inlet hopper for no-loss feeding. Feed rate is controlled by sample divider via interface.