Master Bond, Inc.    Hackensack, NJ 07601
Jun 21, 2002 One-component Supreme 3HT-80 has high shear and high peel strength, and resists impact, thermal shock, vibration, and stress fatigue cracking. It adheres to metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. Bonds resist water, oil, fuels and most organic solvents, even upon prolonged exposures. Operating temperature range is -100 to +350°F. It is 100% reactive and does not contain any solvents. Hardened adhesive is thermal insulator.

Witte Co., Inc., The    Washington, NJ 07882
Jun 21, 2002 Model 400 integrated, multi-step system for pelletizing lines combines dewatering, drying, cooling, dedusting, and screening into single unit. It delivers product moisture levels at 0.04% in nylon applications and 0.10% in polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyesters, polyurethanes and other commodity and engineering resins. Suitable for friable, glass-filled, and micropellets, it accommodates production rates of up to 10,000 lb/hr.

Nett Technologies Inc.    Mississauga, Ontario, L5B4A7, CD   Canada
Jun 20, 2002 Direct-fit catalytic purifiers replace one section of original exhaust system, eliminating requirements of cutting and welding. They reduce diesel particulate and hydrocarbon emissions responsible for characteristic diesel smell and eye irritation. OSHA and MSHA compliant, purifiers reduce CO emissions by over 90%, and remove 20-50% of total particulate matter emissions.

Penn-Union Corp.    Edinboro, PA 16412-2381
Jun 20, 2002 Able to conform to irregular shapes, Penn-Shrink Clear thin-wall, flexible polyolefin tubing provides mechanical, thermal, solvent, and fluid resistance. Penn-Shrink Black Thin-Wall flame retardant, flexible, low shrink-temperature polyolefin tubing meets UL 224 VW-1 and CSA VW-1 (OFT) requirements. Penn-Shrink Heavy-Wall with Adhesive polyolefin heavy-wall heat shrinkable tubing is chemical, corrosion, impact, and abrasion resistant. Made from thermally stabilized modified polyolefin, Penn-Shrink End Caps with Adhesive resist moisture, fungus, and weathering.

Severn Trent Services    Fort Washington, PA 19034-2707
Jun 20, 2002 SWE-II, SENTRY SYSTEM reduces complex water-based waste chemistries. Integrated PLC controls the process, maximizing volume reduction up to 99%. System has redundant safety sensors, 3 stage mist elimination, level control, and options for auto drain, auto decant, and remote modem monitoring.

Epoxies Etc.    Cranston, RI 02921-3407
Jun 20, 2002 Electronic grade, casting, potting, and encapsulating epoxy resin system No. 20-3651\40 adheres to metals, ceramics, and plastics. Physical properties include mixed viscosity of 32,500 cps at 25°C, specific gravity from 1.40 to 1.45 at 25°C, and Shore D Hardness rating of 85 to 88. Tensile Strength ranges from 6,100 to 9,200 psi, and operating temp ranges from -40 to +30 and -65 to +105°C.

Tra-Con, Inc.    Bedford, MA 01730
Jun 19, 2002 TRA-BOND 293-1 high hardness, high Tg epoxy has work life of 8 hr at room temperature, high dielectric constant, and ability to make resilient bonds to variety of substrates like gold, brass and silver. Applications include optoelectronic and instrument assembly.

Mayfran International    Cleveland, OH 44143-0038
Jun 19, 2002 ConSep 2000® II combination, single-platform chip conveyor/coolant separator removes chips and contaminates to 50 micron level. Features include self-cleaning backwash filter system, and cleaner for particulate removal to 10-15 nominal micron level. FastPacâ„¢ Briquetter processes 110 to 6,614 lbs of metal chips per hour (depending on model) and transforms material into dense, dry briquettes. Coolant recovery removes up to 98% of residual coolant and cutting oils.

Eriez Magnetics    Erie, PA 16506
Jun 18, 2002 Syncro-Sieve® provides fixed-rate separation of dry material by size, and is also effective for wet separation. Eccentric-weighted rotary motor creates vibratory motion. Flow patterns and retention time on multiple screen decks can be varied, depending on how eccentric weights are positioned. Circular Syncro-Sieve is available in 24, 36, 48, and 60 in. dia, and can include up to three decks with screens ranging from ¼ in. to 40 mesh.

Bristol International Corp.    North Attleboro, MA 02760
Jun 18, 2002 Model UF-300 Ultrafiltration System handles waste volumes of up to 300 gallons per day (GPD). Wastewater-disposal system allows for simple, continuous operation with minimal energy and operator involvement. It employs ½ in. tubular ultrafiltration membrane technology to separate water from suspended solids and emulsified oils, and reduces wastes by up to 98% without chemical additives. Features include polymeric membrane and skid mounts.

General Polymers    Cincinnati, OH 45242
Jun 17, 2002 Water-based FasTopâ„¢ seamless urethane cements can be installed and ready for service in hours because of their Urethane-cement chemical reaction. FasTop M, applied as mortar, can be installed in one step without topcoat. FasTop S System consists of trowled slurry blend with silica sand broadcast finish. FasTop S-U1 Upgrade System uses decorative quartz broadcast instead of silica sand and requires clear topcoat.

Eriez Magnetics    Erie, PA 16506
Jun 12, 2002 Round Pipe Separators have permanent magnetic elements. They work with gravity or pneumatically conveyed dry, free flowing products such as feed, grain, wood chips, or plastic. Separator is installed by cutting out section of chute where tramp iron contamination is present and slipping separator into position. Neoprene baffle directs flow over magnet face. Separators can use company's Erium(TM), Superpower, Maxipower, or rare earth magnets.

Hayward Industrial Products, Inc.    Elizabeth, NJ 07207
Jun 11, 2002 Heavy-duty, all-plastic basket strainer removes unwanted particulate from flow. Available in PVC, CPVC, or PPL, strainer is offered with threaded, socket weld, or flanged end connections and Viton seals. It is available in sizes for 1/2 through 8 in. pipelines, and comes with no tools required, quick spin-off cover for cleaning. Baskets can be specified with perforations from 1/32 to 3/16 in. Strainers are rated to 150 psi at 70°F.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Jun 10, 2002 Taskmaster Model TM2300 40 hp shredder employs 2 counter-rotating banks of rotating cutters that intermesh at close clearance and shred solid waste by up to 80%. Split body design facilitates complete cutter stack removal without dismantling unit. Variety of seal systems can be used to maintain fluids within chamber. Various sizes and configurations meet most waste reduction applications.

Tra-Con, Inc.    Bedford, MA 01730
Jun 05, 2002 Clear TRA-COAT WCC2B UV curable one-part adhesive can be used for optical fiber, glass, and general purpose applications. Adhesive is clear, medium viscosity, and cures with exposure to UV light at 100 fpm under 300 W/in. bulb. Easy to apply, it creates strong bonds to clear plastics and glass.

Tra-Con, Inc.    Bedford, MA 01730
Jun 05, 2002 TRA-BOND 2106T 2-part epoxy mixes at room temperature and creates strong bonds to metals, plastics, glass, forestry products, ceramics, rubber, masonry materials, and construction materials. It has low shrinkage, and when fully cured it acts as electrical insulator with resistance to gases, vapors, water, galvanic action, and many organic and inorganic compounds. TRA-BOND 2106T cures quickly at room temperature.

Kice Industries, Inc.    Wichita, KS 67219
Jun 05, 2002 Plasma Cutter Filter System removes smoke and dust from cutting area directly. Zipper-duct design allows filter head to move with cutter head, pulling polluted air away from cutter. Fan may be located inside or outside plant. Complete air system is available with or without plasma cutting table, and is prefabricated for installation with existing cutters. It requires power source of only 5 hp.

Hunter Products Inc.    Bridgewater, NJ 08807-1802
Jun 04, 2002 Micro-Metallizer system utilizes disposable marker-type pens based on environmentally friendly plating compounds. System offers bench-top plating convenience, and completely eliminates preparing and handling solutions. Pens can be safely used anywhere. Pens are available in gold, copper, tin, zinc, nickel, black nickel, silver, chrome-color, rhodium, and palladium.

Scientific Instrument & Technology Corp.    Piscataway, NJ 08854
Jun 03, 2002 Model FT80 Spray Dryer has Tall Form chamber straight side to diameter ratio of 3:1 and conical discharge section. Features include 2-fluid nozzle atomization system, nozzle configurations for counter- and co-counter atomizing, and individual inlet and exhaust fans with variable speed control. IP65 control console provides full instrumentation, data logging for key operational parameters, and flexible controls. It is available as Spray Chiller (FT81).

Krylon Diversified Brands    Cleveland, OH 44115
May 31, 2002 Polyurethane Concrete Repair is paintable sealant for joints up to 1 in. wide. It is appropriate for indoor or outdoor applications. Concrete and Mortar Repair is silicone sealant that is suitable for joints and cracks and prevents ice and water damage. Concrete Driveway Repair is latex caulk with resistance to wear. It remains flexible to prevent damage by ice and water. Mortar Patch watertight caulk is paintable, offers flexibility, and cleans up with water.