Airguard Industries, Inc.    Louisville, KY 40218
Jan 19, 2006 Able to snap back to original shape if damaged or deformed with no loss of structural integrity, X-Treme(TM) filters employ self-supported media that offers moisture resistance and eliminates need for expanded metal backing. Inherent media strength and stiffness result in consistent pleat shape, spacing, and height. Fully incinerable products, rated MERV 7, do not support microbial growth or contain any metal components.

Rust-Oleum Corp.    Vernon Hills, IL 60061
Jan 18, 2006 Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or ¼ in. thicknesses, it can be used in USDA facilities based on FSIS Directive 11,000.4.

Rotex, Inc.    Cincinnati, OH 45223 1845
Jan 17, 2006 Measuring 10 x 10 x 12 ft, MEGATEX(TM) Screener provides 100-350 ft² of screen surface and evenly splits and distributes incoming flow of material to multiple, stacked 5 x 7 in. screen decks. Optional aspiration doors remove troublesome chaff that can contaminate surrounding environment and clog other pieces of equipment during load-out process. Doors can be built into new machine or provided as retrofit upgrade.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jan 17, 2006 Able to filter fluids such as blood products, serum, cell and tissue culture media, EverLUX(TM) polyethersulfone (PES) membrane filter is designed for maximum contaminant capacity. Asymmetric structure withstands high particle loads and protein concentrations. Offered with absolute retention ratings of 0.2, 0.4, and 0.6 µm, permanently hydrophilic filter is optimized for sterile filtration, prefiltration, and clarification applications.

Tecan    Rancho Santa Margarita, CA 92688
Jan 13, 2006 Made via Photo ElectroForming (PEF) process, single-layer sieves and meshes ensure no sieved material is trapped during sieving, filtering, or grading. Meshes can be produced with aperture shapes and sizes relevant to application-specific particles, with aperture tolerances from ±2 microns. While offering consistent cross-sectional thickness, design can incorporate solid portions such as lateral supports. Products are supplied as flat sheets, flexible membranes, or 3D forms.

Mearthane Products Corp.    Cranston, RI 02921
Jan 11, 2006 Chemically blown cellular foam, Durethane F features closed cell structure and is used for banking equipment conveyor belts to bridge gaps between rollers. Mechanically mixed, microcellular Durethane M features uniform, mostly open cell structure. Solid elastomer Durethane S provides heat dissipation and resistance to wear in paper-handling and transport applications. Materials are self-cleaning, provide precision of movement, and are customizable for conductive properties.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Jan 09, 2006 Utilizing 20 hp motor, Hard Drive Destruction System, Model 22 HDD(TM) shreds used computer hard drives into unreconstructible, irregularly shaped fragments. Up to 3½ in. standard drives can be destroyed safely at rate of 20/hr. Up to 10 drives can be preloaded for automatic feeding, and built-in conveyor adjusts feeding speed to prevent jamming. Rotary knife mill cuts waste until particles are small enough to pass through steel sizing screen.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jan 05, 2006 Without requiring surface preparation, Loctite® H8600(TM) Speedbonder(TM) cures when mixed at room temperature to bond galvanized steel, aluminum, stainless steel, polycarbonate, fiber reinforced plastic composite, and Gelcoat substrates. Non-sagging, 2-component, acrylic adhesive is 100% reactive and fills gaps as large as 0.375 in. Viscosity allows it to be applied horizontally or vertically to surfaces and facilitates flow without running.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Jan 05, 2006 Based on Biomek® automation and diagnostic primary tube handling technologies, Vidiera(TM) NsP Nucleic Sample Preparation platform provides nucleic acid isolation, quantification, normalization, and reaction set-up for downstream assay analysis. Suited for molecular diagnostic applications in virology and pathology, Vidiera NsP enables hospital and reference labs to centralize pre-analytical functions in one room and streamline process.

Epoxies Etc.    Cranston, RI 02921-3407
Jan 02, 2006 Designed to fill wide and narrow gaps, 50-1220 Thermal Interface Material consists of filled silicone grease formulated with combination of filler types. Suited for heat sink and high power applications, one-component product features 0.05% bleed after 24 hr at 200°C, dielectric strength of 210 V/mil, and thermal conductivity of 8 BTU/hr/ft²/in. It is available in 8 oz jars, 16 oz jars, and quarts.

Scapa North America    Windsor, CT 06095
Dec 22, 2005 Offering resistance to plasticizers and oils found in foam substrates, Ultrafilm(TM) U740A bonds to variety of foams and low surface energy materials. It provides consistent bond upon lamination, and is resistant to water and ambient humidity. Suited for general product assembly, foam lamination, and gasketing, product is 4.0 mils thick and is supplied with 74 No. polycoated release liner to facilitate die cutting.

Dana Corp.    Toledo, OH 43697
Dec 16, 2005 Designed to help meet global emissions standards, MultiTwister(TM) axial cyclonic air/oil separator helps vehicles run cleaner by removing oil particles from engine's air stream. Double helix channels create spiral flow, which develops centrifugal forces that cause oil to coalesce along channels where it separates droplets from engine's airflow. Captured oil is returned to engine crankcase, eliminating excess oil from combustion process.

Scapa North America    Windsor, CT 06095
Dec 15, 2005 Acrylic transfer adhesives Unifilm® U617A and U618A, suited for automotive assembly applications such as general assembly and foam lamination, adhere to ether and ester foams as well as surfaces such as low surface energy plastics. Unifilm U617A, available in 3 mil thickness, exhibits resistance to chemicals, environmental extremes, and aging. Available in 4 mil thickness, Unifilm U618A exhibits humidity- and water-resistance.

Koch Membrane Systems, Inc.    Wilmington, MA 01887
Dec 15, 2005 Suited for dairy applications, TFC®-SR®3 nanofiltration elements utilize polyamide thin-film composite membranes. Spiral wound membranes pass monovalent salts such as sodium chloride, yet retain divalent salts, proteins, and sugars. Retention of sugars, such as lactose, typically exceeds 99%. Available in 4 and 8 in. dia at 38 and 39 in. lengths, spiral elements can be used for whey pre-concentration, salt whey diafiltration, and lactose demineralization.

JNJ Industries Inc.    Franklin, MA 02038
Dec 14, 2005 SmartBond(TM) Absorbents are capable of absorbing hazardous hydrocarbon-based and aqueous based fluids, encapsulating them and rendering them inert. Solid byproduct can be handled without gloves and disposed of without hazardous fees. Liquids and vapors are permanently trapped, eliminating accidental combustion. Available in granule form, absorbent pad, or boom sock, products absorb up to 15x their weight in hydrocarbons and 300x their weight in aqueous solutions.

Anver Corp. - Anver.Com    Hudson, MA 01749
Dec 13, 2005 Anver JV Mini-Vacuum Pumps, powered by compressed air, achieve 26 in. Hg vacuum with 0.50 or 0.74 scfm flow rate. Weighing 16 g, 1¾ in. long products are capable of millisecond attach-and-release and can be mounted directly at pickup point. Pumps, equipped with optional air supply control valve, can be transformed into compact vacuum systems with built-in 24 Vdc controls. Molded from thermoplastic, products are offered with 5 mm female threads or 5/32 in. OD tube connection ports.

Blasch Precision Ceramics, Inc.    Albany, NY 12204
Dec 09, 2005 Offered in sizes from 10-600 mm and thicknesses from 10-50 mm, Cleen-Flo Filters are available in alumina for use with aluminum and aluminum alloys, zirconia for stainless steel and nickel alloys, and silicon carbide for grey iron, ductile iron, precious metals, copper, bronze, and brass. All come in square, round, and custom shapes with pore densities from 8-60 pores/in. Thermal and chemical stability avoids any reaction with molten metal being filtered.

TPE Solutions, Inc    Shirley, MA 01464
Dec 08, 2005 Featuring 20 to 90 Shore A hardness range, Softlink 900 Series TPEs allow lowering of friction coefficient to improve abrasion resistance. Off-white or easy-to-color compounds can be processed without preheating or drying and offer matte finish. Used in 2-shot molding, compounds can substitute for silicone, latex, or rubber in power tools, hand tools, appliances, and consumer products.

Mass-Vac, Inc.    North Billerica, MA 01862 0359
Dec 06, 2005 To protect vacuum pumps, MV Multi-Trap® condenses, absorbs, and neutralizes process byproducts from applications that generate volatiles, organic solvents, and acids. It features 3 or 4 customizable stages of effluent trapping, where first stage is 200 in.² baffle shield surrounded by ID cooling coils. Compact unit, constructed from stainless steel, can be equipped with optional bottom cooling section which has ¼ in. NPT drain plug.

Graver Technologies    Glasgow, DE 19702
Dec 01, 2005 Free-flowing MetSorb(TM) HMRP (Heavy Metal Removal Powder) is suited for incorporation into pressed or extruded carbon blocks to reduce lead, arsenic, and other heavy metals in contaminated drinking and process water. In addition to reducing heavy metals to meet EPA drinking water standards, product meets NSF Standard 53 and passes EPA TCLP for nonhazardous disposal of spent cartridges in sanitary landfill.