Caliper Life Sciences, Inc.    Hopkinton, MA 01748
Jun 21, 2006 Tabletop Models TPW3 and APW3 Tablet and Active Ingredient Processing Workstations perform fully automated sample preparation for common pharmaceutical development and quality assurance tests in regulatory compliant manner. System delivers precise control over dispersing and extracting, with gravimetric confirmation that assures liquid dispense accuracy. Units confirm to ATSM and USP requirements for volumetric delivery, precision, and accuracy.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 15, 2006 Corothane® I Moisture Cure Coatings can be matched to wide range of colors in large and small batches. They include topcoats and zinc-rich primers that are designed for temperatures down to 20°F or high humidity applications. Providing abrasion and chemical resistance, single-component, VOC-compliant coatings are suitable for water tanks, clarifiers, and secondary containment.

Bio-Chem Valve, Inc.    Boonton, NJ 07005
Jun 13, 2006 Mechanical Bubble Trap attaches to laboratory tubing to remove air bubbles that interfere with flow system and produce errors or cause columns to run dry. Installed by attachment to ¼ in.-28 UNF female ports, it measures 30 x 22 mm, and consists of inert PTFE membrane and PEEK housing. Device is suited for use in flow analysis systems, as guard in liquid chromatography, for enzyme reactors, and flow-through biosensors.

Master Bond, Inc.    Hackensack, NJ 07601
Jun 12, 2006 One component, heat curing epoxy adhesive/sealant EP17 cures at temperatures from 300-350°F for 60-90 minutes. Flowable paste has 8,700 psi tensile strength, 387,000 psi tensile modulus, Shore D hardness greater than 90, and compressive strength greater than 13,000 psi. MIL-MMM-A-132 compliant, 100% reactive compound is resistant to chemicals, including fuels and acids, and bonds to metals, glass, ceramics, vulcanized rubbers, and plastics.

GE Advanced Materials- Silicones    South Charleston, WV 25303
Jun 12, 2006 Eliminating changes in sheen of paint when applied over caulk or sealant, GE Infinity urethane elastomeric sealant enables users to deliver seamless look when painting. It provides optimal adhesion and elasticity without dirt pick-up or yellowing. Incorporating BioSeal, cured sealant is resistant to mold and mildew growth. GE Infinity is suited for indoor and outdoor applications and cleans up with soap and water.

GE Company GE Plastics    Pittsfield, MA 01201
Jun 09, 2006 Pigmented for high opacity, White Ultem WH217 ensures bar code labels can be read correctly. Polyetherimide (PEI) film provides print contrast ratio of 98% and is also flame retardant. Suited for electronic applications, product exhibits dimensional stability and meets RoHS standards. Consistent thickness (±10% gauge control at 50 µm) allows even application of label adhesive or clear coatings that may be needed when using certain inks.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 08, 2006 Self-contained Anver Electric Vac-Pack Stations include dry, oil-free vacuum pump to avoid contamination. They also have reservoir, gauges, red and green indicator lights, and pendent control with attach/release switch. Equipped with energy saver circuitry, pumps shut off automatically when proper vacuum is reached and stays constant above preset level. Products are available with 1½, 3, and 5 hp motors, pulling 24 in. Hg vacuum with 24, 50, or 75 scfm respectively.

Kurt Manufacturing Co., Industrial Products Div.    Minneapolis, MN 55413 1540
Jun 05, 2006 Utilizing 30 hp main motor, Model 1200 Chipmunk compacts up to 1,200 lb of chips per hr. High-volume system produces dense aluminum chips with its 8:1 compaction ratio. Aluminum material and coolant are saved, as is floor space for storing and handling scrap and coolant. Machine is suited for small- and large-scale chip producing operations.

Great Western Mfg. Co., Inc.    Leavenworth, KS 66048 0149
May 31, 2006 Offering capacities from 25-300 lb/min on wheat flour, Model QA24 is available with 2-5 sieves with net screen area from 4-10 ft². It is equipped with Tru-Balance drive and pneumatic sieve compression system, and can be dismantled for inspection, maintenance, or cleaning by one person. Directly inserted into vacuum or dilute phase pressure pneumatic conveying system, Model QA24 provides HACCP solution for food, pharmaceutical, and chemical operations.

American Baler Co.    Bellevue, OH 44811
May 30, 2006 Using twin motors to produce dense bales without heavy power usage, HS8543 has rated production capacity exceeding 50 tons and 46,000 ft³ per hr. Floating tension force allows baler to adjust automatically to unique requirements of changing materials, while 8 spring-loaded retainer locks restrict bale spring back and minimize rooster tails. Auxiliary functions, such as auto-tier, fluffer door, and oil filtration, are driven by separate dedicated motor to conserve energy.

Clarcor Air Filtration    Louisville, KY 40218
May 30, 2006 Mark 7 self-supported pleated panel air filter carries MERV 7 (mechanical) rating on ASHRAE 52.2 Test Standard. With no wire grid or metal components, it features consistent pleat shape, spacing, and height using moisture-resistant synthetic media. High-strength media, if damaged, snaps back to original shape with no loss of structural integrity. Filter is fully incinerable, and metal-free construction simplifies installation and maintenance.

Edwards Vacuum Technology    Wilmington, MA 01887
May 24, 2006 Offering fit-and-forget vacuum solution, Model HT16B features machined cast aluminum interior for stability and stainless steel body to prevent corrosion and ensure cleanliness. Sight glass enables operator to check oil level of pump without disturbing integrity of vacuum system. Design of interior and boiler assembly enables pump's performance and ultimate vacuum to be maintained between oil changes.

Xenosep Technologies LLC    Boonton, NJ 07005
May 23, 2006 Optimized for extraction of EPA Method 1664 samples, Oil and Grease, Xenosep® SPE Filters combine prefilter layer that traps 5-25 µm particulates, intermediate prefilter that traps particulate in 1-5 µm range, and adsorbent layer with chemically treated fibers that retain oil and grease analytes. Trapping particulates at each layer enables efficient filtration of dirty real-world samples, measured in less than 3 minutes, which previously would have taken hours to filter.

Transor Filter U S A    Elk Grove Village, IL 60007
May 23, 2006 Expandable Centralized Filtration System includes base filter module with 12 filter vessels, 30 kW refrigerant system, and clean storage tank with multiple flush pumps. Base unit can be expanded with additional modules configured with either 6 or 12 vessels. Automatic backflushing cleans filter elements and places debris in container for disposal or reclamation. Product is suited for manufacturing applications such as grinding, honing, lapping, super finishing, and EDM.

GLS Corporation    McHenry, IL 60050
May 18, 2006 Versaflex® OM3000 grades exhibit water clarity and overmold bond strength to PC, ABS, PC/PETG, PC/PBT and other substrates for insert or 2-shot injection molded applications. Grades can be customized in regards to hardness, color, and color effects (day-glow, metallic, sparkle, pearlescent). While silky soft to touch, material can be utilized to provide slip resistance, vibration damping, or impact resistance for electronics. Series is available in 45 and 60 Shore A ratings.

Rotex, Inc.    Cincinnati, OH 45223 1845
May 18, 2006 Featuring side access doors that facilitate screen cleaning and changes, APEX(TM) produces uses gyratory-reciprocating motion with no vertical motion to keep material in constant contact with screen surface. Ergonomic unit can be maintained by one person and uses 5 lb APEX screens that range in size from ½ in. to 325 mesh. Suited for dry separation screening, product has top cover inspection ports that allow for seal inspection from outside of machine.

Dri-Air Industries, Inc.    East Windsor, CT 06088
May 15, 2006 Stand-alone system allows individual drying parameters for 3 components - such as virgin, regrind, and colorant - and then mixes and conveys components on demand. Equipped with 4-bed dryer and sealed mixing chamber, system offers individual temperature controls for each component material and includes volumetric mixing (variable and fixed rate) augers placed under each hopper. Changing colorant/regrind ratios is possible via 10-turn potentiometers in control panel.

Natural Product Innovations LLC    Northbrook, IL 60062
May 15, 2006 Botanical Breeze(TM) utilizes all-natural, chemical-free, antimicrobial technology to eradicate odors associated with vacuuming by inhibiting growth of bacteria, fungi, and viruses. Product works in all makes and models of vacuums, including whole-house systems. Each time vacuum is used, circulating air mixes with Botanical Breeze in vacuum bag or canister to distribute product's ingredients wherever it continuously reacts with newly vacuumed organisms.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.    Walpole, MA 02081
May 12, 2006 Turbo-Separator T14RCS features processing rate of up to 40 gpm with solids removal capacity of up to 22 lb before changing liner. Low profile dirty and clean tank receives fluids via gravity directly from machine tool. Offering overflow protection, clean tank includes heat exchanger and supply pump for return of cleaned fluid directly to nozzles in grinder. Discharged dry solids can provide resource recovery for valuable materials, such as carbide.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
May 11, 2006 Available in TSSOP-14 package, LMH1981 multi-format video synchronization separator performs all necessary sync separation to generate low-jitter horizontal and vertical sync signals for NTSC, PAL, SECAM, standard-, and high-definition (HD) video formats. It features timing outputs needed for any video system and accepts bi- and tri-level sync video inputs. Unit also features 50% slicing for separation of signals that vary in amplitude, offset, and noise.