GAO RFID Inc.
Toronto   Canada
Sep 30, 2008 Providing seamless data acquisition when used in laptop, handheld, or mobile computer, Compact Flash (CF) RFID Card is long-range interrogator that helps in identification, tracking, tracing, and localization of assets/people. It features adjustable output power so that communication range can reach up to 300 ft, 100 tag/sec identification rate that identifies fast-moving objects, and different operating system drivers for flexible and hardware-independent use.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Sep 25, 2008 Covering entire UHF bandwidth (850-965 MHz) in single device that complies with EPCGlobal C1 G2 standard, LXMS31 series MAGICSTRAP(TM) is inductively coupled to antenna that has been designed and integrated into PCB. No electrical contact is necessary, allowing unit to be adhered to PCB using glue/sticky tape. Suited for product inventory control and supply chain management, it measures 3.2 x 1.6 mm with maximum height of 0.7 mm, and features high tolerance against ESD over 10 kV.

Balluff, Inc.
Florence, KY 41042-0937
Sep 18, 2008 Easy Loop(TM) offers process visibility for reliable parts tracking. With multiple versions of read head hardware options as well as read distances up to 50 mm, ID values on Easy ID(TM) tags can be used to track location of part or product bins/totes in and out of storage and retrieval systems or in production line applications. System offers single-cable connections for power and communication, with standard interfaces such as RS-232/-422 or Ethernet TCP-IP.

Baracoda SA
Marly-Le-Roi 78160  France
Sep 16, 2008 TagRunners can be used in mobile environments for asset tracking/traceability, and in medical environments such as hospitals to ensure patient file/blood vial tracking. With ability to read up to 15,000 tags during continuous 48 hr use, user can check real-time battery status from mobile device. Features include RFID HF 13.56 MHz technology, Bluetooth Class 1 (up to 100 m), contact reading, protocol support, reading/encoding function, timestamp, no data loss mode, and auto reconnection.

RedPrairie Corp.
Waukesha, WI 53186
Sep 04, 2008 Providing users with ability to manage yard operations and assets, WMS Yard management integrates technology that allows RFID readers at gates to read passive RFID tags on trailers as they enter or leave yard to verify and record their presence on-site. Fixed zone or mobile readers can be used to locate trailers within yard, confirm trailer movements, and support yard audits. Event management capabilities alert managers and initiate resolution to exceptions uncovered by RFID reads.

International Coding Technologies, Inc.
Beverly, MA 01915
Aug 25, 2008 To streamline production and inventory management processes, TrackCon® acts as complete product identification and tracking system via mobile computer with RFID read capabilities and Cast-A-Code® tag. End-to-end traceability solution serializes and provides real-time location data for manufactured concrete structures. RFID data is used to identify and solve quality issues, ensure proper material shipment, record GPS coordinates of delivered materials, and prepare invoices.

Imation Corp.
Oakdale, MN 55128
Aug 25, 2008 Optimizing library audits, DataGuard rf Tape Tracking System incorporates RFID technology, volume-and-serial-number identification, and UHF support. RFID/Vol-Ser Labels are applied to every tape cartridge in data center, and each includes antenna with read range up to 6 ft for single cartridge. Dual-functioning Motorola 9090G reads RFID labels and bar codes, while software uses multiple data checks and communicates with any existing tape management system via docking station or Wi-Fi.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Aug 20, 2008 Engineered to provide read range of 5-6 m based on normal 860-960 MHz UHF RFID reader, UHF RFID Tag measures 114 x 39 mm, and can be integrated into RFID automatic garment management project. Developed for one-off use, tag utilizes ISO 18000-6B or ISO/IEC 18000-6C/EPC Class 1 Gen 2 protocols.

SAS Automation, Ltd.
Xenia, OH 45385
Aug 18, 2008 SAS EOAT (End-of-Arm Tooling) RFID features tags that automatically ensure correct tooling is working with corresponding operation and equipment. It identifies when correct gripper is mounted to robot running application program and confirms critical equipment is installed. System has built-in I/O for up to 8 channels of RFID and supports PROFIBUS®-DP, DeviceNet(TM), Modbus-TCP, PROFINET, and EtherNet/IP(TM). Data carriers use FRAM storage technology and are rated up to 210°C.

DAILY RFID CO.,LIMITED
Guangzhou, 510403  China
Aug 12, 2008 Designed to automate vehicle access control to gated communities, secured parking, and other areas, RFID Windshield Tag is adhesive label engineered to provide read range of 9-15 feet using passive windshield RFID inlay. Durable tag measures 86 x 54 cm.

GAO RFID Inc.
Toronto   Canada
Jul 31, 2008 Operating in 2.45 GHz band, Model 217002 is active, gain adjustable RFID reader that uses 0.18 µm CMOS IC for low power consumption and adheres to 802.11b wireless standard. Built-in, omnidirectional antenna can identify RFID transponder tagged items up to 100 m in all directions. Users can adjust read distance from less than 5 m up to 100 m. Unit supports dual operating modes, allowing for upload of data in real time or data buffering for later retrieval.

Montech, LLC
Huntersville, NC 28078
Jun 27, 2008 Designed for Montrac transport system, self-moving shuttle with integrated RFID read/write unit runs along maintenance-free monorail track with speeds up to 30 m/min. Product lying on shuttle is provided with transponder that contains information about product's route along track. While on shuttle, transponder is written through Intelligent Routing Module by serial interface. When transponder is outside Montrac system, it can be written using standard RFID unit.

Harting KGaA
  Germany
Jun 23, 2008 With reading range of up to 4 m, HARfid LT 86 (HT) UHF RFID transponder is used to identify objects under extreme temperatures in transport logistics and production management. It supplies data necessary to ensure control during production and for end-to-end process verification. Mechanical and chemical resistant units are suited for foodstuff industry, paint drying facilities, or medical systems in which vessels and instruments are disinfected and sterilized.

Omron Electronics LLC
Schaumburg, IL 60173
Jun 19, 2008 Supporting retailer supply chain operations in Mexico and Brazil, Series V750 Reader/Writer is EPCglobal certified and Class 1 Gen2-compliant. Tuning function self-adjusts read parameters according to tag density, while Dense Reader Mode effectively shuts out interference. Triggered by external signals, reader can conduct judgment or control devices without instruction from host. Antenna output can be set individually when more than one antenna is used.

Hewlett-Packard Co. (Corporate Headquarters)
Palo Alto, CA 94304-1185
Jun 19, 2008 HP Factory Express RFID Service tracks critical data center assets - HP factory-built servers, storage devices, rack enclosures - so customers can continuously monitor equipment as soon as it is received at their facilities. When deployed as part of full RFID solution, service automates and tracks device movement to reduce property loss, increase security, and provide audit controls in data center. Standard and Custom service levels are available.

Atmel Corporation
San Jose, CA 95131
Apr 11, 2008 Yuma+ (AT88SCRF-ADK1) eliminates need for in-depth cryptography understanding when deploying secure host-client RFID systems that depend on mutual authentication and data encryption. It also eliminates need to dive deeply into details of ISO14443B RFID standard, providing fully turnkey reader and tag solution. Kit includes interface board that connects to PC through USB and module board that contains AVR® ATMega168 MCU, Melexis MLX90121 RFID transceiver chip, and SPI connectivity.

Barcoding, Inc.
Baltimore, MD 21231
Mar 18, 2008 Interfacing RFID technology with legacy software applications, CaptureTech(TM) RFID Wedge works by connecting to RFID reader and filtering information that is captured from RFID tags. It then transmits filtered information into legacy software application that is running on PC. RFID systems can be setup to scan for tags continuously, manually, or via external trigger. Wedge connects to any device that supports USB cable interface including Microsoft PC's, Macs, or Linux devices.

KSW Microtec AG
Dresden 01099  Germany
Feb 27, 2008 With read range of approximately 18 ft, Windshield Inlay uses passive RFID technology and Gen2 chip with 512-bit user memory. Inlay benefits commercial fleet operators of cars or trucks, as well as private vehicle owners requiring secure access and safe parking. It can also be used to control entry and exit gates to automotive services such as toll stations, car rental parks, or car washes.

InfoLogix, Inc.
Hatboro, PA 19040
Feb 26, 2008 Utilizing RFID technology, wireless SurgiChip(TM) identifies and documents that surgical team performs proper procedure on correct patient at right surgical site prior to start of procedure. System provides electronic audit trail to verify compliance with Joint Commission's Universal Protocol® and is HIPAA compliant, using encryption algorithms to secure patient data at all times. SurgiChip(TM) uses existing WLAN infrastructure to bridge communication gap with all members of surgical team.

SkyeTek, Inc.
Boulder, CO 80301
Feb 19, 2008 SkyeModule(TM) M7 promotes integration of UHF Gen2 capabilities within new and existing applications such as printers and mobile/handheld devices that share common requirements for tag support, protocol, performance, and security. Operating over 862-955 MHz range, reader features anti-collision and dense reader mode capabilities that promote support EPC Class 1 Gen2 tags, while integrated low-pass filter is included to meet China and Japan regulatory requirements.