GAO RFID Inc.    Toronto   Canada
Sep 30, 2008 Providing seamless data acquisition when used in laptop, handheld, or mobile computer, Compact Flash (CF) RFID Card is long-range interrogator that helps in identification, tracking, tracing, and localization of assets/people. It features adjustable output power so that communication range can reach up to 300 ft, 100 tag/sec identification rate that identifies fast-moving objects, and different operating system drivers for flexible and hardware-independent use.

GAO RFID Inc.    Toronto   Canada
Sep 30, 2008 Active UHF Beacon tag can send data to mobile or fixed reader at non-line-of-sight distances of up to 300 ft. Static data are written on tag and sent at programmable interval without requiring request from reader. Available for standard North American and European ISM band frequencies, tag has configurable ping rate, tracks mobile assets, controls access or online inventory, and localizes assets/personnel in designated areas.

GAO Tek Inc.    Toronto M1B2K4  Canada
Sep 25, 2008 Model GAO4022 portable spectrum analyzer implements full phase-locked loop oscillator and all-digitized medium frequency processing technologies. It features RBW/VBW filters and medium frequency/video detectors that employ digital methods. Up to 200 measurement records can be stored within its internal, non-volatile memory, and they can be downloaded to PC through RS232 interface.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Sep 25, 2008 Covering entire UHF bandwidth (850-965 MHz) in single device that complies with EPCGlobal C1 G2 standard, LXMS31 series MAGICSTRAP(TM) is inductively coupled to antenna that has been designed and integrated into PCB. No electrical contact is necessary, allowing unit to be adhered to PCB using glue/sticky tape. Suited for product inventory control and supply chain management, it measures 3.2 x 1.6 mm with maximum height of 0.7 mm, and features high tolerance against ESD over 10 kV.

GAO RFID Inc.    Toronto   Canada
Sep 18, 2008 Eliminating interference from metals/liquids, Series of 3 passive UHF (Gen 2) RFID tags are used for supply chain management and high-value asset tracking, and come with standard label covering finish/ruggedized rigid case finish. Max is effective for long-distance applications and has read range greater than 40 ft. Featuring read range greater than 16.5 ft, Flex is functional for medium-distance assets, while Prox suits short-distance IT assets and has read range greater than 8 ft.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 18, 2008 Supporting RF antennas as small as 38 x 28 mm, RF-HCT-WRC5-KP221 secure multi-purpose contactless chip/module combines security with flexible and configurable memory that supports up to 5 applications on one contactless card or token. This ISO/IEC 14443 Type B chip offers dynamic encryption via NIST-approved Triple DES and SHA-1 crypto-algorithms as well as ANSI X9.63 based session key security. Also, 128-bit unique session key is generated for each transaction.

Balluff, Inc.    Florence, KY 41042-0937
Sep 18, 2008 Easy Loop(TM) offers process visibility for reliable parts tracking. With multiple versions of read head hardware options as well as read distances up to 50 mm, ID values on Easy ID(TM) tags can be used to track location of part or product bins/totes in and out of storage and retrieval systems or in production line applications. System offers single-cable connections for power and communication, with standard interfaces such as RS-232/-422 or Ethernet TCP-IP.

GAO RFID Inc.    Toronto   Canada
Sep 17, 2008 Suited for asset locating and tracking and warehouse inventory management applications, 2.4 GHz active beaconing RFID tag has LED that flashes when tag receives specific signal from RFID reader. Featuring tamper-proof alarm that sounds if tag is dislodged, it can be mounted on metal and operates in harsh environments. It offers 100 tag/sec identification rate, 2,000 tag management in RF field, bi-directional reader communication, and transmits ID every 2 sec.

Baracoda SA    Marly-Le-Roi 78160  France
Sep 16, 2008 TagRunners can be used in mobile environments for asset tracking/traceability, and in medical environments such as hospitals to ensure patient file/blood vial tracking. With ability to read up to 15,000 tags during continuous 48 hr use, user can check real-time battery status from mobile device. Features include RFID HF 13.56 MHz technology, Bluetooth Class 1 (up to 100 m), contact reading, protocol support, reading/encoding function, timestamp, no data loss mode, and auto reconnection.

Baracoda SA    Marly-Le-Roi 78160  France
Sep 16, 2008 Weighing 132 g, TagRunners 13.56 MHz RFID scanner can be connected to range of mobile terminals such as PDAs, cellphones, Pocket PCs, or smartphones. It features no data loss mode where data are not lost if user is out of Bluetooth connection area or if battery of scanner is empty, while batch mode enables any reader to read RFID tags without any Bluetooth connection and then transmit data to terminal. Unit withstands several drops onto concrete when used with optional protective boot.

RedPrairie Corp.    Waukesha, WI 53186
Sep 04, 2008 Providing users with ability to manage yard operations and assets, WMS Yard management integrates technology that allows RFID readers at gates to read passive RFID tags on trailers as they enter or leave yard to verify and record their presence on-site. Fixed zone or mobile readers can be used to locate trailers within yard, confirm trailer movements, and support yard audits. Event management capabilities alert managers and initiate resolution to exceptions uncovered by RFID reads.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Sep 03, 2008 Made of silicon or PC material, One-time RFID Wrist Band - 03 products are used in hospitals for patient and newborn baby tracking. One version operates at 13.56 MHz or 125 KHz frequency and offers read/write range of 1-10 mm. Data maintenance is rated at 10 years, and EMS memory can be wiped and written more than 100K times. Also available, UHF Frequency (860-960 MHz) version operates in FHSS or fixed frequency operating mode and has 10 cm to 2 m read/write range.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 02, 2008 E5071C is offered with 20 GHz frequency range option for evaluating 3rd harmonics of passive components in WLAN, WiMAX(TM), UWB, or any 4G technology. Model E5092A test set is used to evaluate multiport devices for front-end modules in cellular handsets or WLAN devices. It provides up to 22 port measurements and can be used with Measurement Wizard Assistant software to simplify complex system setups. Both models feature user interfaces compatible with existing solutions.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Aug 26, 2008 Available in 125 kHz or 13.56 MHz operating frequencies, HF Metal Tag-05 measures 3 mm thick and is constructed with magnetic material and epoxy. Ironside has read range up to 5-7 cm on metal and can be affixed to any metal surface by using industrial adhesives. Designed for harsh conditions and suitable for close-quarters checking on-metal tagging applications, unit offers contactless read and write operation and works in temperatures from -10 to +50ºC.

International Coding Technologies, Inc.    Beverly, MA 01915
Aug 25, 2008 To streamline production and inventory management processes, TrackCon® acts as complete product identification and tracking system via mobile computer with RFID read capabilities and Cast-A-Code® tag. End-to-end traceability solution serializes and provides real-time location data for manufactured concrete structures. RFID data is used to identify and solve quality issues, ensure proper material shipment, record GPS coordinates of delivered materials, and prepare invoices.

Imation Corp.    Oakdale, MN 55128
Aug 25, 2008 Optimizing library audits, DataGuard rf Tape Tracking System incorporates RFID technology, volume-and-serial-number identification, and UHF support. RFID/Vol-Ser Labels are applied to every tape cartridge in data center, and each includes antenna with read range up to 6 ft for single cartridge. Dual-functioning Motorola 9090G reads RFID labels and bar codes, while software uses multiple data checks and communicates with any existing tape management system via docking station or Wi-Fi.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Aug 25, 2008 Able to be used for patient care and tracking in healthcare environments, GEN 2 RFID Wristband addresses need for on-the-wrist RFID tag with generous read range. It is constructed from 100% pure silicone, making design non-allergenic, hygienic, and comfortable to wear. Designed using ISO 18000-6 compliant inlays, product offers read distances from 4.2-8.8 ft.

GAO Tek Inc.    Toronto M1B2K4  Canada
Aug 20, 2008 Model GAOAV3620 RF Integrated Vector Network Analyzer performs accurate measurement of amplitude, phase, and group delay in RF networks, and can also measure time domain and frequency conversion components. Features include configurable upper and lower limits measurement, LCD display, and simultaneous display of 4 channels (maximum 8 testing curves).

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Aug 20, 2008 Engineered to provide read range of 5-6 m based on normal 860-960 MHz UHF RFID reader, UHF RFID Tag measures 114 x 39 mm, and can be integrated into RFID automatic garment management project. Developed for one-off use, tag utilizes ISO 18000-6B or ISO/IEC 18000-6C/EPC Class 1 Gen 2 protocols.

SAS Automation, Ltd.    Xenia, OH 45385
Aug 18, 2008 SAS EOAT (End-of-Arm Tooling) RFID features tags that automatically ensure correct tooling is working with corresponding operation and equipment. It identifies when correct gripper is mounted to robot running application program and confirms critical equipment is installed. System has built-in I/O for up to 8 channels of RFID and supports PROFIBUS®-DP, DeviceNet(TM), Modbus-TCP, PROFINET, and EtherNet/IP(TM). Data carriers use FRAM storage technology and are rated up to 210°C.