VAST Enterprises, LLC
Minneapolis, MN 55418
Apr 28, 2009 Manufactured from 95% recycled rubber tires and plastics, VAST Permeable Composite Pavers offer eco-friendly stormwater management option. With infiltration rate of more than 400 iph when installed with open-graded base, they can decrease rate and volume of rain runoff from parking lots, driveways, sidewalks and patios. Measuring 3 x 6 in., pavers weigh 11 lb/sq ft and provide structural strength, durability, and appearance to replace segmental concrete.

Cultec, Inc.
Brookfield, CT 06804 1830
Jul 17, 2008 Recharger® 180 and 280 incorporate internal manifold feature, which introduces design flexibility to stormwater management system and decreases required installation footprint. Located on chamber, 2 side portals allow manifolding to take place at any point within system, eliminate need to build external manifolds, and optimize cross-feed capabilities. High Volume Low Velocity (HVLV) FC-24 Feed Connectors, open on both endwalls, are inserted into side portals to construct manifold.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Mar 07, 2008 Made from high-density polyethylene, BioDiffuser® ARC 18 is 5 ft long with secure joint connection that enables units to be installed in straight or contoured applications. Diamond plate traction pattern on external corrugations provides non-slip surface, while optional side port coupler snaps onto chamber for clean-out access and to provide additional plumbing options. Corrugated design optimizes load bearing in trench, meeting H-10 (16,000 lb/axle) specification.

Cultec, Inc.
Brookfield, CT 06804 1830
Feb 08, 2008 Measuring 30.5 in. high x 52 in. wide, and 8.5 ft long, Recharger® 330XL holds nearly 475 gallons and will provide minimum of 80 cu ft of storage when surrounded in stone. Two side portals allow manifolding to take place at any point within system, eliminating need to build external manifolds. Constructed of high-density polyethylene for chemical resistance, chamber can accept up to 24 in. dia pipe into endwall when greater flow rates are required.

Danray Products LLC
Rockton, IL 61072-9411
Dec 06, 2006 Able to deflect chips and coolant, 3/16 in. thick polycarbonate heavy-duty lathe chuck shields provide barrier between chuck, workpiece, and operator. Shields hinge up to left and out of way for changing chuck, using chuck key, and changing the workpiece. Operator doesn't need to reach over chuck to change workpiece, and shields will not interfere with lathes that have rear guard/backsplash.

Knaack Manufacturing Company
Crystal Lake, IL 60014
Nov 03, 2006 Featuring 16 gauge steel construction and 3/16 in. steel top mounting angles, WEATHER GUARD Van Solutions bulkheads fit Ford and Chevy vans. Bulkheads have 9 x 12 in. Dog Hatch(TM) in bottom for safe transportation of long-length material and include 14 in. wide steel shelving. Product's 57½ in. tapered high end panels allow closer installation to sidewall and provide additional cargo space in middle of both Sprinter and full-size vans.

Rockford Systems, Inc.
Rockford, IL 61109 2695
Oct 31, 2006 Designed for protection against exposure to rotating chuck, flying chips, and coolant splash, lathe shields come in sliding, crosslide-travel, small and large steel, as well as transparent versions. All shields have polycarbonate window that promotes visibility into point of operation, and various mounting rods, hinges, and brackets are available for mounting to lathe headstock. Frames can be fabricated of steel or impact-resistant, transparent polycarbonate and extruded aluminum.

New Pig Corporation
Tipton, PA 16684 0304
Oct 24, 2006 Designed to fit rectangular storm drains up to 30 x 40 in. and round drains up to 30 in. diameter, hydrophilic PIG® Drain Insert Plus helps keep hydrocarbons and sediment from entering drains and water system. Filter strips remove floating oil and other hydrocarbons, while 18 in. deep accumulation pocket collects oil, sediment, and other contaminants. Excess flow port avoids blockage during periods of high water flow.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Mar 24, 2006 Featuring injection molded, lightweight design, BioDiffuser ARC 36 offers 20° integral articulating joint suited for straight or contoured septic leach field applications. True corrugated design eliminates flat surfaces and optimizes load bearing capability in trench. Modified post and dome engagement mechanism adds strength at critical joint connections. Measuring 5 ft long, ARC 36 can be installed by one person into 3 ft wide trench.

Hancor, Inc.
Findlay, OH 45839
Mar 20, 2006 Engineered with secure, overlapping joints, sidewall openings, and open bottom, LandSaver(TM) meets demands of subsurface storm water management applications. Open bottom design retains storm water and then lets it infiltrate slowly into soil, assisting in recharging groundwater. Chamber can also be used for detention to relieve peak flows through outlet control structure. Chamber suits commercial, industrial, recreational, and residential developments.

CONTECH Construction Products Inc.
West Chester, OH 45069
Jan 05, 2006 Engineered to stabilize stormwater runoff, Optimizer(TM) underground detention system contains flow control devices that use pressure head to begin immediately discharging at max allowable rate from multiple orifices. Corrugated metal pipe detention solution reduces required storage volume as well as excavation and backfill requirements. Multiple sizing tanks, set up independently, accommodate equally for all storms that need to be met by designer.

Transpo Industries, Inc.
New Rochelle, NY 10801
Aug 26, 2005 Fit to any flat-grated or combination curb-grated catch basin, EnviroSafeâ„¢ captures and retains pollutants from stormwater run-off. Product provides over 7 ft³ of storage for sediment (28 x 44 in. size) and employs hooded bypass that eliminates flooding potential while retaining captured sediment and debris. Available in rectangular and circular configurations, product accepts cartridges that may be configured to target particular pollutants.

Cultec, Inc.
Brookfield, CT 06804 1830
Jun 17, 2005 Recharger® 150 detention/retention chamber measures 8.5 ft long, 33 in. wide, and has storage capacity of 160 gal. It includes built-in endwall on each chamber and overlapping rib connection for easy installation and strong connection between chambers. Constructed of high-density polyethylene, chamber is resistant to chemicals contained in parking lot runoff.

MWH Soft
Broomfield, CO 80021
Apr 21, 2005 Available for power ArcGIS (ESRI, Redlands, CA) users, InfoSWMM v2.0 sewer network analysis program provides GIS-centric modeling and design solution for management and operation of stormwater and wastewater collection systems. Urban drainage modeling product integrates all operations of sanitary, storm, and combined sewer system in one geoengineering environment, optimizing BMP and LID designs. Software includes multiple reporting and graphics features.

Hancor, Inc.
Findlay, OH 45839
Sep 02, 2004 StorMasterâ„¢ storm water management system incorporates chambers, injection molded in high-density polypropylene, that ensure uniform sidewall leaching ports on each unit. Each chamber is 50 in. long and weighs 43 lb, allowing one-person handling. Chambers are available with prefabricated inlets and are equipped with carrying handle that promotes safe installations. Amount of inspection/vent ports promotes jobsite and maintenance flexibility.

Stormwater Management Inc.
Portland, OR 97220
May 24, 2004 Stormwater Management Electrocoagulation Systemâ„¢ uses controlled electrical current to remove multiple contaminants from industrial wastewater, washwater, and stormwater. Monitored and maintained by on-board control system, system reduces operator time by 95% and draws approximately 15 A on 230 V, 3-phase circuit at 5 gpm. Use of electrocoagulation water processing system results in nearly 100% of cleaned water that can be recycled.

Enpac Corp.
Eastlake, OH 44095
Jul 10, 2003 STORM SENTINEL™ Adjustable Catch Basin Insert eliminates non-point-source oil and other contamination of water supplies. Insert, with optional Non-Leaching Co-Polymer sock, traps oil, grease, sediment, litter, and debris carried in runoff. Self-supporting product, made of 8 oz, non-woven, geotextile fabric, has overflow rate of 300 gpm max. Rectangular type fits drains from 16 x 20 to 24 x 36 in, while round type fits drains with 27–29 in. diameter.

New Pig Corp.
Tipton, PA 16684 0304
Jun 11, 2003 SPILLBLOCKER® Dike confines liquid with two 5 ft dikes and keystone connectors. Sections can be combined to form longer dikes. Made of flexible polyurethane, non-absorbent material resists oil, water, and many chemicals. Reusable, 3 in. high 2-layer construction features hard top layer and soft, tacky bottom. Product is available in yellow, black, and lime green with available corners to create a 45° angle between dikes.

Conserv-a-Therm Corporation
Union, NJ 07083
Dec 26, 2002 Deep pocket design prevents snow from clogging air filters and diminished air flow into buildings. Design also provides constant drainage, prevents refreezing of snowmelt, and eliminates stagnant water pools. Extracting snow flakes from air as it enters buildings, product installs into factory built air handlers and field built HVAC systems. It is available in various panel sizes for 3,000–30,000 cfm range; multiple panels can handle over 100,000 cfm.

New Pig Corp.
Tipton, PA 16684 0304
Oct 16, 2002 Flexible, reusable PIG® SPILLBLOCKER® Dike, in high-visibility lime green, promotes safety and reduces tripping hazards. Constructed of 100% polyurethane, dike contains and diverts flow of liquids without absorbing them. It is available in 4½ and 6¾ in. sizes for controlling different volumes of liquid. Built-in connectors at each end allow 5 ft long dikes to be connected to reach desired length.