Braun, J.G.
Morton Grove, IL 60053
Jan 31, 2003 GlassWedgeâ„¢ permits dry installation of ½ in. tempered glass in shoe moulding. It consists of plastic isolator channel, aluminum wedge, and pre-drilled aluminum shoe moulding. Isolators are slipped over bottom of tempered glass and spaced 24 in. on center. Following confirmation of alignment, wedges are hammered into place using GlassWedgeâ„¢ chisel. System self-centers, self-plumbs and glass panels are set solidly in place in minutes.

Mezzanine Safeti-Gates, Inc.
Essex, MA 01929
Jan 20, 2003 Pallet Flow Pick Module Swing Gates for picking bays with multiple deep pallets have gates that open automatically when pallet is pushed into position on pallet flow rails, and close automatically when pallet flows into picking position of system. Safety gates fit into rack. Hinge brackets attach to existing rack, and gates attach to brackets. Gates are 42 in. high, come in various widths, and meet OSHA and BOCA requirements.

BlueWater Mfg., Inc.
Chanhassen, MN 55317
Jan 17, 2003 Modular SAFETYRAIL 2000 provides fall protection for building's roof perimeter without nullifying roof warranty because it does not need to be nailed, screwed, or bolted into building's roof. System comes in 5, 7½, and 10 ft self-supporting sections. It meets OSHA Fall Protection Regulations 29 CFR 1926.502 and 1910.23. Guardrail can be used during construction or erected during roof maintenance, repair of HVAC, or for roof hatch and skylight protection.

Ideal Shield, LLC
Detroit, MI 48209
Jan 14, 2003 Highly visible Ideal Shield® Clearance Bar is made from low-density polyethylene thermoplastic, with 5.25 in. OD and 78 in. length. Bar comes in standard OSHA yellow or custom color and can have molded-in saftey warnings, symbols, or company logos.

ITC Mfg. Inc.
Phoenix, AZ 85009
Dec 22, 2002 Made from heavy gauge steel with powder coated finish, guard rails have pre-tapped holes for easy installation to plant floor. They protect storage racks, office structures, work areas, traffic lanes, manufacturing equipment, and workstations from fork lift trucks and other industrial traffic. They are available as single post, single safety rails, or corner railing, and meet or exceed all applicable OSHA regulations.

Vestil Manufacturing Co.
Angola, IN 46703-0507
Nov 19, 2002 Steel Pipe Safety Handrails, for use as pedestrian barriers, protect people and machinery on loading docks, floor openings, walkways, and mezzanines. Pre-assembled handrail sections may be custom fit to each application. Powder-coated handrails are 42 in. high, with 21 in. midrail, and available in lengths from 24–96 in. Rails are 1 5/8 in. OD schedule 40 pipe and meet OSHA and ANSI standards.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Nov 14, 2002 Offered with raking capability, KeeGuard® system allows railings to tilt up to 11° inward. Freestanding, counterbalanced, modular guardrail system installs without drilling or penetrating roof membrane. Its 4, pre-fabricated modular components accommodate various rooftop configurations. Designed for use with 1½ in. schedule 40 standard pipe, guardrail system is galvanized for corrosion-resistance and includes Kee Klamp® slip-on structural pipe fittings.

Plastic Safety Systems, Inc.
Cleveland, OH 44120 0140
Oct 04, 2002 UV-protected polyethylene NITE LITE and NITE II each provide 3 reflective stripes for awareness on trouble roadways. International orange, with white and orange reflective stripes, as well as black, with yellow reflective stripes for dangerous installations, are available. Standard roll size is 4 x 50 ft. Applications include utility poles close to traffic, construction projects near roads, and pedestrian or vehicular traffic.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Jul 30, 2002 KeeGuard® freestanding railing system installs around rooftop skylights to protect against falling. Constructed of Kee Klamp® slip-on pipe fittings and schedule 40, 1½ in. standard pipe, both fittings and pipe are galvanized for corrosion resistance. System does not block light, and is possible to install further from edge so it is not seen through skylight. Minimum size is 10 x 10 ft., but it can be expanded and adapted to inclined roofs up to 5 deg.

Wire Crafters, Inc.
Louisville, KY 40214 2900
Jul 18, 2002 MezzaRail® combines handrail and wire panel into one unit and is designed for mezzanines, aisle ways, and loading docks. Panels form complete barrier preventing objects from falling between rails. Two bolts fasten panel sections to posts, and posts mount to structure with two anchors. Deck or face mounting options are available.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
May 29, 2002 Kee Hatch(TM) provides safe egress and ingress through roof-type access hatches, and protection of roof opening while roof hatch is open. It is constructed of standard pipe and Kee Klamp® slip-on pipe fittings. Seven models meet installation and locale requirements. Kee Hatch(TM) requires no penetration of roof membrane, making it suitable for new construction or retrofit. It meets OSHA Standard CFR 29 1910.23 and CFR 29 1910.27.

Alcoa Engineered Products
Lafayette, IN 47903
May 14, 2002 Guide Rail System directs people safely away from areas containing mobile equipment, machinery, or other hazards. Modular system can be installed indoors and outdoors. Interchangeable components assemble into standard or custom configurations and lengths. Horizontal guide rails, vertical posts, and corner adapters are made of heavy gauge 6061-T6 extruded aluminum, powder-coated in UV weather-resistant safety yellow. Rails are available in 5, 10, and 20 ft lengths.

ALCOA, Inc.
Pittsburgh, PA 15212
May 09, 2002 Guide Rail System(TM) consists of interchangeable components that assemble into standard or custom configurations and lengths. Horizontal guide rails, vertical posts, and corner adapters are made of heavy gauge 6061-T6 extruded aluminum, powder coated in UV weather-resistant safety yellow. Guide rails are available in 5, 10, and 20 ft lengths. Swing arm gate is available in various sizes.

Cornell Rolling Door Specialists
Mountaintop, PA 18707
Apr 22, 2002 SentryGate(TM) offers immediate security enhancement without extensive remodel construction. It features curtain constructed of injection molded, nylon components with concealed horizontal metal rods at 2 in. on center. The 65% open curtain design permits visibility from both sides of unit. Curtain components withstand heavy use and are available in black or white matte finish.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Apr 08, 2002 Kwik Kit(TM) safety railing kit provides safety barriers around machinery and equipment or other areas where personnel access should be restricted because of safety concerns. It is made from 1.9 in. OD pipe that is powder-coated and exceeds OSHA and BOCA standards. Railings can be assembled using hex key to tighten large, easy-to-use set screws on aluminum or galvanized cast-iron/steel pipe fittings supplied. No welding, drilling or threading is required.

Steel King Industries, Inc.
Stevens Point, WI 54481
Mar 26, 2002 Steel Guard protective railing for fork trucks is prefabricated, eliminating need for on-site core drilling, cutting, welding, and painting. Railing is available for double high applications, and comes standard with industrial yellow powder coat finish for visual and physical barrier. Many sizes are available for immediate shipping.

Micrel Semiconductor Inc.
San Jose, CA 95131
Feb 05, 2002 Seventeen 3GHz to 4GHz PECL and LVPECL devices, part of ECL Proâ„¢ communications logic solutions, include clock fanout buffers and clock dividers, drivers/receivers, and translators. They operate down to 2.5V single-supply and are guaranteed over -40 to 85 deg C temperature range. Fanout buffer family offers maximum frequency of more than 3GHz, pin-to-pin skew of less than 20ps, and tr/tf time of less than 180ps over temperature.