Bosch Rexroth Corporation    Hoffman Estates, IL 60192-3707
Aug 19, 2010 Using square and rectangular strut profiles, EcoShape Framing System enables assembly of workstations, material shuttles, or racks. Made from aluminum, components are completely reusable and recyclable. MTpro planning software enables users to drag and drop components and modules out of product catalog and place them into virtual 3D environment, automatically snapping into correct mounting position. MTpro works in background to calculate order list with all components and accessories.

Bosch Rexroth Corporation    Hoffman Estates, IL 60192-3707
Dec 14, 2009 Used to create new solutions or optimize/extend old ones, EcoShape facilitates construction of custom workstations, material shuttles, and flow racks. It is based on reusable and recyclable anodized aluminum profiles and also includes caps and bolted-together connection elements. Special adapters are also available for applications requiring high load-bearing capacities. Use helps improve assembly lines and avoid errors through kaizen or poka-yoke principles in lean manufacturing.

Screen Tight, Custom Extrusion Division    Georgetown, SC 29440
Jul 14, 2009 Intended for second floor or higher porch applications, MINItrack(TM) consists of ¾ x ¾ in. clips that attach to trim or wooden frame and 8, 10, or 12 ft long extruded powder-coated aluminum channels. Channels are available in white or bronze finishes and snap over clips for clean, professional look. Offering unlimited trim possibilities, MINItrack is suited for any housing style and blends in without visible obstructions.

Chicago Clamp Company    Broadview, IL 60155
Jul 16, 2008 Designed for installing HVAC equipment, exhaust fans, vents, and skylights, framing roof openings, and supporting loads above or below roof decks, Framing Clamp System requires no welding or specialized tools for installation. System consists of End Clamps, T-Brackets, and Perforated Channels which are available in lengths up to 10 ft. In typical framing application, 4 End Clamps are attached to 2 parallel bar joists or beams, and each End Clamp occupies 1¼ x 3 in. space between joists.

Conxtech, Inc    Hayward, CA 94545
May 09, 2008 Designed for commercial/industrial applications, ConXL(TM) long-span steel framing system is available for parking structures, hospitals, and data centers, as well as pipeline, pipe rack, and refinery structures for oil/gas industry. Robotically welded unit features bi-axial special moment frame (SMF) joint that meets special detailing requirements for high seismic areas, OSHPD (California's Office of Statewide Planning & Development) requirements, and U.S. DoD anti-terrorism standards.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Buchanan, MI 49107-1801
Aug 15, 2007 Cleanroom Profile System provides cleanroom manufacturers with series of modular aluminum framing components specifically designed for contaminant-sensitive environments. Due to its modular nature, product line facilitates configuration and allows for reconfiguration as needed when building machine bases, material shuttles, tables, cabinets, and more. System uses bolt-together construction and includes smooth surfaced aluminum extrusions and aluminum cover strips.

80/20, Inc.    Columbia City, IN 46725
Jul 23, 2007 T-slotted aluminum framing system, The Industrial Erector Set, accepts leveling feet. Eight bases made from 304 SS are available with or without floor mount holes, in diameters of 30-120 mm, with load capacities up to 8,800 lb and anti-slip rubber pads. Additional options for feet include choice of stainless steel threaded stems in 15+ different lengths, available in metric sizes from M8-M20 and imperial sizes from ¼-20 to ¾-10.

Walls & Forms Inc.    Dallas, TX 75374
Jun 14, 2007 With ability to attach to walls and windows, EuroSign(TM) DisplayFrames are available in 8½ x 11 and 36 x 48 in. sizes. Standard units are made of plastic/aluminum frame profiles and feature integrated radius corners with backer boards. Contoured frame profiles are factory applied onto Flex-Hinges that allow frame and corner to open and close and hold graphics securely. Frames include clear anti-reflective lenses, mounting holes, double side corner tape, and screws.

Rousseau Metal    St. Jean-Port-Joli, QC G0R 3G0  Canada
May 02, 2006 With proper anchors and strong wall, multipurpose frames offer 300 lb capacity for storing objects using wall space (up to 500 lb with set of 3 frames). Products measure 72 in. high and can be cut in two 36 in. frames or four 18 in. frames. Perforated every 1 in. for adjustment of accessories, frames can be combined with accessories such as overhead workstation lights, louvered panels for plastic bins, and overhead tool rails.

Flex-Ability Concepts    Oklahoma City, OK 73179
Oct 13, 2005 Flex-Lite provides way for builders to frame curves by utilizing flexible metal track or plate with wood or metal studs. Product is manufactured from 25-gauge G-40 galvanized sheet metal and is available in 3 5/8 in. x 10 ft long pieces. Each piece includes 20 pivotal sections that achieve 15 in. radius. Flex Lite can be formed by hand and secured by self-tapping or sharp point screws. Pre-punched holes in flanges and web plate facilitate installation.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 30, 2004 TradeMaster® Keystone Wall Plates and Decorator Frames accept any combination of UTP and multimedia jack modules. Modules are available with F connectors for video coax cable; Category 5e jacks for data, telephone, camera, and audio; binding posts for speaker wiring; RCA to F connectors for sub-woofer pre-out; and blank modules to fill unused jack module spaces. Wall plates and frames come in 1, 2, 3, 4, and 6 port variants in ivory, light almond, and white.

Bosch Rexroth Corporation    Hoffman Estates, IL 60192-3707
Sep 23, 2004 Aluminum structural framing profiles in Series 40/50 include closed-slotted and radius profiles for clean applications, as well as profiles with 50 x 150 mm and 80 x 120 mm cross sections for heavy-duty applications. Profiles employ connectors that provide bolt-together construction to facilitate assembly and reconfiguration. Accessories give users ability to develop complete applications from single source.

80/20, Inc.    Columbia City, IN 46725
Jun 18, 2004 HT Series modular aluminum framing system is suited for designing carts, gravity feed racks, or integrating with existing T-slotted aluminum lumber. Product line offers 20 styles of bars to meet project requirements. Working with HT Series requires users to cut bars to length and select connection method. Accessories, such as joining plates, doors, and panels, are available.

MK Automation Engineering Inc.    Bloomfield, CT 06002
Mar 21, 2002 Aluminum-profile Series 60, for machine support, linear motion, frame building, and material handling applications, is based on 60 x 60 mm cross-sections. Profiles up to 120 x 240 mm can be complemented by foam-filled combination profiles for cross-section dimensions of 420 x 240 mm. T-Slots permit use of M12 connecting elements, withstanding 2.5 times load of customary M8 screw joints. Alloy 6005T6 provides 10% higher stiffness than more commonly used alloy 6063T6.