Sto Corp.    Atlanta, GA 30331
May 17, 2011 StoEnergy Guard(TM) has waterproof air barrier membrane that bonds to sheathing to resist air and water penetration as well as waterproof moisture barrier that protects against water damage. Included Sto DrainScreen(TM) mat allows water that reaches back of cladding to drain to outside. Product features materials tested for low flame spread and smoke development and which are resistant to mold and mildew. It is used for protection under multiple cladding types, including stone, siding, and stucco.

Roxul Inc.    Milton, ON L9T0H9  Canada
Aug 20, 2010 Manufactured using dual density technology, CavityRock® DD is available in thickness of 2.5 in. or more, while mono density CavityRock®MD comes in 1, 1.5, and 2 in. thicknesses. Green products are made from combination of natural stone and recycled material. Able to withstand heat of flames up to 2,150°F without melting, non-combustible insulation boards provide line of defense for commercial and industrial buildings, and are capable of repelling and draining water that penetrates exterior wall.

ERICO    Solon, OH 44139-2631
Apr 22, 2010 Featuring high load-carrying capacity, LENTON® THERMO Balcony System is designed to help eliminate damaging effects of thermal bridging, such as cold spots, energy loss, condensation, and mold growth. It can be used in balcony construction, cantilever beams (both concrete and structural steel), and slab-to-wall connections. Modular insulation solution maintains full structural integrity and is easy to install and transport.

Therma Fiber    Wabash, IN 46992
Nov 16, 2009 Suited for commercial construction applications, multi-purpose VersaBoard is available in 4 densities ranging from 3.5-8.0 pcf. Product provides thermal insulation, fire protection, and sound and noise absorption. It also repels moisture and can be used as exposed interior surface. Featuring up to 90% recycled content, VersaBoard contributes up to 33 LEED® credits across 4 categories.

Therma Fiber    Wabash, IN 46992
May 22, 2009 Thermafiber® Insolutions(TM) are comprised of insulation products and services for architects, specifiers, contractors, and building facade manufacturers. In addition to All-Phase Consultation, offerings include mineral wool insulation for fire protection, sound control, and energy conservation; UL-approved Impasse® curtain wall insulation hanger system; and customization. Commercial insulation contains 70%-90% post industrial recycled content, and contributes to 20 LEED® credits.

BASF Corp.    Wyandotte, MI 48192
May 21, 2009 Designed to create airtight building envelope, ENERTITE® spray-applied open-cell foam insulates while providing sound absorption, inhibiting mold and mildew for healthier indoor air quality, and offering protection from thermal leaks. Water-blown foam flows into difficult-to-reach areas and creates seamless seal. Insulation maintains its form and characteristics over time and will not deteriorate or sag.

Sto Corp.    Atlanta, GA 30331
May 20, 2009 Energy-efficient StoTherm Lotusan NExT(TM) integrates StoGuard(TM) waterproof air barrier, StoTherm® insulated wall cladding, and Stolit® Lotusan® textured finish with self-cleaning properties. Consisting of spray-on building wrap, StoGuard protects against moisture intrusion and air leakage, while StoTherm provides blanket of continuous insulation that protects exterior from temperature fluctuations. Water-repellent Stolit Lotusan rinses clean with rainfall while resisting mold, mildew, and algae.

Building Register Limited    Maidstone   United Kingdom
Feb 23, 2009 Grey in color with orange flecks, Jablite Premium is safe to handle and does not require any special equipment or skills. Expanded polystyrene material is also non-toxic and biologically inert. For groundwork in buildings, Jabfloor Premium comes in different levels of thickness, which can be selected depending on individual requirements of project. It can be used above concrete slab, precast suspended concrete floor, beam and block floor system, or below sand or cement screed.

Therma Fiber    Wabash, IN 46992
Aug 12, 2008 RainBarrier(TM) 30, with 3 lb density, and RainBarrier(TM) 45, with 4.5 lb density, are engineered to repel water and drain moisture. They provide thermal insulation, fire protection, and acoustical control and are UV-resistant and noncombustible. Available in regular- and dark-colored fibers, mineral wool insulation is compatible with common wall ties, adhesives, and air barrier systems.

Raven Industries, Inc. - Flexible Films Div.    Sioux Falls, SD 57117
May 05, 2008 Fortress Pro(TM) is non-woven, non-perforated housewrap that incorporates layer of polyester fiber reinforcement in order to promote durability and fastener holding. In addition to providing air and water resistance, this breathable fabric offers moisture vapor permeability in range prescribed by building scientists.

Georgia-Pacific Corp.    Atlanta, GA 30303-1801
Feb 20, 2008 Nautilus(TM) OSB panels have pre-applied weather-resistant barrier that eliminates need for separate building wrap installation. By combining sheathing and building wrap, product promotes process efficiency for builders and contractors. These code-compliant panels can also resist rain and moisture during construction period. When seams are sealed with code-compliant Nautilus 3 in. wide seam tape, walls are protected against air leaks.

Georgia-Pacific Corp.    Atlanta, GA 30303-1801
Jan 23, 2008 Tested in accordance with ASTM E 330, DensGlass Gold® is suited for architects and builders concerned about construction schedules that might be delayed by adverse weather conditions. Exterior sheathing withstands winds in excess of 155 mph (Category 5 hurricane) and exhibits resistance to moisture and mold during and after construction. Mats facilitate handling of DensGlass Gold and also reduce required amount of primer needed for self-adhered membranes.

Carsonite International    Early Branch, SC 29916
Sep 06, 2007 Equipped with molded vent that will not rust or break, VaporGuard(TM) protects gas utility pipelines from hazardous build up of moisture and gas. It requires no maintenance and is resistant to UV radiation. For installation, product is designed to fit any 3.5 in. ID or 3.0 in. OD pipe.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Nov 27, 2006 Featuring breathable aluminum layer, DuPont(TM) Tyvek® ThermaWrap(TM) enhances thermal performance of walls by acting as barrier to air, water, and UV rays while also managing radiant heat. Vapor permeability and thermal protection levels defend against moisture condensation that could lead to mold and mildew growth. This airtight, water-resistant, and wind-tight product helps minimize heat loss during winter and optimize heat reflection in summer.

Johns Manville    Denver, CO 80202
Feb 17, 2006 Gorilla Wrap(TM) non-perforated, nonwoven, polymeric housewrap minimizes air infiltration, resulting in energy efficiency and moisture control. Translucent material offers tear resistance and enables contractors to see studs, nails, and windows on home's frame. Employing asphalt with nonwoven polyester reinforcement, DuraBase(TM) underlayment provides puncture resistance and waterproofing as it seals around nails. It can be exposed to sun for 6 months without performance deterioration.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Apr 28, 2005 Suited for areas with seasonal changes in temperature and humidity, MemBrain(TM) smart vapor retarder changes permeability from less than 1 perm in low-humidity conditions to greater than 20 perm in high-humidity conditions. Polyamide film breathes to allow excess moisture to escape from wall cavities. This helps reduce risk and liability of concerns such as mold growth and rot due to excess moisture in homes and buildings.

Georgia-Pacific Corp.    Atlanta, GA 30303-1801
Jul 28, 2004 DensGlass Silverâ„¢ exterior gypsum wall sheathing resists moisture and mold in residential applications. It features glass mats on front and back of board along with moisture-resistant core. Product can be used as wall sheathing over steel or wood framing up to 24 in. on center. Almost any cladding, including composition, stone, metal, brick, wood, stucco and plywood siding, can be applied over DensGlass Silver when cladding is fastened directly into framing.

Grace Construction Products, A Unit Of W.R. Grace & Co.    Cambridge, MA 02140-1692
Aug 21, 2003 Available in widths of 6, 9, and 12 in., Grace Vycor® Plus flashing membrane contains a cord embedded in adhesive layer that splits release paper in half. Product protects structures from water infiltration and reduces risk of rot and mold development. Composed of cross-laminated, high-density polyethylene sheet backed by pressure-sensitive, rubberized, asphalt adhesive, product seals around fasteners to form water-tight laps.

Pactiv Corp.    Lake Forest, IL 60045
May 15, 2003 GreenGuard® RainDropâ„¢ utilizes moisture management technology that acts as water barrier: vertical cords every few centimeters along face of housewrap create drainage channels that divert bulk water straight down to base of exterior wall. Channels dry quickly due to facilitated airflow and will not crush, even when hard-backed siding is fastened to wall over product. Material comes in 9 x 100 ft and 9 x 150 ft rolls.

Pactiv Corp.    Lake Forest, IL 60045
May 15, 2003 GreenGuard® PLYGOOD®-Ultra rigid sheathing provides insulation R-value of 2.0 in 7/16 in. thickness and 1.5 R-value in 3/8 in. thickness. Featuring extruded polystyrene foam core and reinforcing woven facer, sheathing's moisture absorption is less than ½ %, which means it won't swell or warp. Sheets come in 4 x 8 and 4 x 9 ft sizes. Each 4 x 8 ft sheet weighs 4 lb, cuts with utility knife, and may be installed using pneumatic staple gun.