Benko Products Inc.    Sheffield Village, OH 44054
May 21, 2013 Featuring non-skid, grip-strut treads for optimal traction, Model SS Self-Leveling Stairs are suitable for applications where required range exceeds angles greater than 15° above or below working platform height. Folding handrails made of heavy wall tubing are mounted on both sides. Available in steel, aluminum, and fiberglass construction, stairs offer slide-track mounting, pivot mounting, and flush-mount brackets. Aluminum units have galvanized back box sections and back uprights.

Benko Products Inc.    Sheffield Village, OH 44054
Nov 19, 2009 Featuring large handrails and galvanized steel back box sections, Elite Series provides safe access from loading dock rack or dock to elevated walkway. Connection point eliminates shakiness and maximizes stability of attached fall protection enclosure, while non-skid, self-leveling grip strut tread provides optimal footing. With customizable options for dimensions and construction materials, stairs are suited for chemical, dry bulk, and petroleum industries.

Wildeck, Inc.    Waukesha, WI 53187
Feb 12, 2009 Available in 1/8 in. increments from 3-12 ft high, Knock-Down Stair system has modular design that facilitates job-site assembly and installation in any facility. It can provide safe and convenient access to elevated platforms and mezzanines as well as rack and shelving systems. Standard configuration provides 36 in. wide stair tread and closed tread/open riser design that is IBC Code-compliant and meets OSHA safety standards.

Wildeck, Inc.    Waukesha, WI 53187
Jan 14, 2009 Available in 1/8 in. increments from 3-12 ft in height, Knock-Down Stairs can provide safe and convenient access to elevated platforms and mezzanines or racks and shelving systems. Modular design, which facilitates on-site assembly and installation in any facility, may also be incorporated into pick modules. Standard configuration provides 36 in. wide stair tread and Closed Tread/Open Riser design that is IBC code-compliant and meets OSHA standards.

Wildeck, Inc.    Waukesha, WI 53187
Sep 11, 2008 Available in 1/8 in. increments from 3-12 ft in height, Wildeck Knock-Down Stairs can provide safe access to elevated platforms, mezzanines, and rack and shelving systems where space is limited. Standard configuration provides 36 in. wide stair tread and closed tread/open riser design that is IBC code-compliant and meets OSHA safety standards. Modular units can be assembled on job site and installed in virtually any facility. Standard color is gray.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)    Buffalo, NY 14206-2665
May 22, 2008 Kee Access® Smooth Handrail Systems are suited for stairs, ramps, walkways, and other areas where it is necessary to conform to ADA codes. Built using Kee Klamp® structural, slip-on railing components, railing system is comprised of framework of horizontal bars supported by vertical, upright posts assembled from modular fittings and standard 1¼ in. Schedule 40 pipe. Railing components are constructed of iron and are galvanized for corrosion resistance.

The Kerfkore Company    Brunswick, GA 31525
Oct 09, 2007 Available in 8 in. wide step height that can be cut down to match desired rise, paint-grade Stair Risers are offered in single or double nosed versions. Variety of substrates can be used as core product such as plywood, particleboard, and MDF. Standard sizes include single end 59 x 8 in. and 120 x 8 in., double end 96 x 8 in. and 104 x 8 in., and special single end 96 x 8 in.

Shakespeare Composite Structures    Newberry, SC 29108
Sep 06, 2007 Available in 3 rail heights, Armor-Rail® deck and stair railing will meet or exceed most building code requirements. It will not rust, rot, or corrode, even in salt air or adverse weather conditions. Railing never needs painting, but can be painted if user desires. Offered in Classic, Traditional, Victorian, and Heritage styles, Armor-Rail includes standard and adjustable stair railing sections, plus structural posts and columns, and gripable handrail.

Shakespeare Composite Structures    Newberry, SC 29108
Sep 06, 2007 Offered in 3 colors and 3 sizes, Armor-Rail® meets/exceeds building code requirements when properly installed and allows for spans up to 12 ft between posts. System is unpalatable to insects and will not rust, rot, or corrode, even in salt air or adverse weather conditions. Style options include round or square picket styles, turned balusters, or glass panels, all of which include standard and adjustable stair railing sections and hand rail.

Sure-Foot Industries    Cleveland, OH 44130
Mar 09, 2007 Suitable for interior or exterior stairways, Boldstep Glow-in-the-Dark Message Stair Tread can be made to indicate floor levels, warnings, or to guide people out of buildings in emergencies. Message is encapsulated in 2 in. glow section to ensure that it cannot be worn off and will remain visible during power outages. Available in widths from ¾-11 in., tread is constructed with aluminum base and coated with anti-slip epoxy filler that will not trap dirt and oils.

Omega Industrial Products Inc.    Saukville, WI 53080
Sep 25, 2006 Built with pre-manufactured components, Quick-Step Stairs eliminate fixed or welded stairways. They are constructed from heavy gauge structural steel and provide for vertical adjustability. Once user sets top and bottom treads to prescribed rise, rest of treads fall into uniform rise and run. Parallelogram design offers adjustable range up to 4 in. Protected with primed/painted finish, stairs are suited for interior or exterior applications.

Revere Products    Cleveland, OH 44135 0311
May 11, 2006 Saf Tred(TM) no-slip treads have coarse, mineral grit surface that helps ensure safe footing when exposed to water, oil, and grease. Applied to slippery floors, stairs, ladders, and ramps, self-adhesive products help workplaces meet OSHA safety requirements by increasing traction. Pressure-sensitive backing facilitates installation on any clean, dry surface, while durability allows for indoor and outdoor use. Treads are offered in pre-cut strips, circles, and squares.

Handi-Ramp, Inc.    Libertyville, IL 60048
Jan 24, 2006 Suited for slippery stairs, decks, or walkways, Non-Skid Tread Strips consist of extruded aluminum dimpled treads that provide traction and permanent protection. Measuring 1/8 in. thick, strips screw onto any surface and are guaranteed not to wear out. Applications include motels, apartment complexes, and universities.

Cubic Designs Inc.    New Berlin, WI 53151
Apr 19, 2005 Code-approved Stairways are built with pre-manufactured components and shipped with all components and hardware included. Constructed from heavy gauge steel with solid diamond treads, design features 1-piece stringer and handrail assemblies to improve rigidity and ease installation. Stairways are protected with powder coat finish and are available in 14 colors. Options include code-approved handrail, stair platforms, closed risers, and handrail extensions.

Vestil Manufacturing Co.    Angola, IN 46703-0507
Jan 05, 2005 Alternating-Tread Stairs are intended for installations requiring stairs having angle of inclination of 56–68° to horizon. Allowing safe face-forward descents, units feature handrail on each side, dual safety chain at top, and formed steel steps with raised surfaces for traction. Welded steel stairs provide load capacity of 300 lb and are powder-coated safety yellow for high visibility.

Lapeyre Stair, Inc.    Harahan, LA 70123
Dec 15, 2003 Industrial egress stairs or fixed industrial stairs are designed and built to order according to called-in building codes and specifications. Conventional stairs comply with OSHA and BOCA codes. Available in carbon steel with various finishes, stairs may be ordered with grip, diamond treadplate, bar grating, or concrete pan treads. Aluminum and stainless steel stairs are also available.

Sure-Foot Industries    Cleveland, OH 44130
Nov 06, 2003 Available as 9 and 11 in. aluminum treads, products cover any size or shape step and come in 8 colors: black, white, grey, brown, green, red, blue, and yellow. Also offered is 4 in. tread with continuous anchor system to use when inserting treads into freshly poured, still soft concrete. Slip-resistant treads meet OSHA, AFA, ISO 9000 standards.

Schmidt, W. A., Inc.    Souderton, PA 18964
Nov 06, 2003 Custom Stairs and Landings help customers meet updated building codes. Stairs come in welded or bolted configurations, with standard tread width of 36 in. Customer can specify open or closed risers, and treads in open-grate, serrated, pan, and flat or diamond plate material. Standard landing measures 4 x 4 ft and can be installed at any point as required. Double intermediate landings turn stair direction 180º at mid-point or top of stairs.

Sure-Foot Industries    Cleveland, OH 44130
Mar 31, 2003 Bold Step non-porous, permanent footway solutions are engineered with aluminum platform and utilize epoxy-based filler that accommodates standard and custom colors that defy effects of heavy foot traffic and severe weather. Stair treads, stair nosings, and safety walkway treads can be used outdoors and indoors, anchored into cement or wood. Systems, available in lengths to 10 ft and widths of ¾â€“11 in., resist damage from repeated exposure to chemicals/solvents.

Sure-Foot Industries    Cleveland, OH 44130
Mar 31, 2003 Hazard striped for safety, Black and Yellow Warning Tread provides heavy-duty, permanent anti-slip solution for slippery surfaces. Able to go over most surfaces, aluminum-extruded epoxy filled tread comes pre-drilled. Epoxy used on product is closed cell system, which prevents dirt and oils from penetrating system. Colored plate meets OSHA, ADA, and ISO 9000 standards.