Architectural and Civil Engineering Products ->
Building Components ->
(Showing headlines 1 - 20) more ....
Moldmaking Silicone exhibits versatile properties.
Quantum Silicones, Inc.
Richmond, VA 23237
Apr 29, 2014
To accommodate applications requiring flowable or brushable moldmaking material, 2-component QM 132T has 10:1 mix ratio by weight and can obtain either thixotropic or flowable properties via 3 catalyst options. Tear-resistant silicone rubber, as flexible, translucent moldmaking material, works with polyester, polyurethane, and epoxy resins as casting materials and cures at room temperature. Work life is ~35 min before material doubles in viscosity, and demold time ranges from 12–16 hr.
SMT Board Support System Plates accommodate heavy loads.
Count On Tools, Inc.
Gainesville, GA 30501
Apr 01, 2014
Available in ¼ and 3/8 in. heights for ezLOAD Board Supports, ezLOAD Support Plates let end-users limit movement of ESD-safe foam fingers while shortening compression height. This enhances support for heavy load procedures. While ezLOAD PCB Support System features aluminum base with magnetic supports and soft, ESD-safe foam fingers, ezLOAD PAD features active grip technology to securely hold boards during screen printing process and is ESD-safe.
Linoleum Commercial Flooring combines sustainability, efficiency.
Domco Tarkett, Inc.
Farnham, QC J2N 1J7 Canada
Oct 31, 2013
Available in 93 colors, with range of bright and clear options as well as natural and earth tones, Harmonium xf(2)™ incorporates xf™ surface treatment technology and xf(2) matte finish. Product exhibits resistance to stains, abrasion, and chemicals, and cork content lends to acoustic properties as well as underfoot comfort. Made from 95% natural materials, FloorScore-certified flooring features 34% recycled content, has TVOC levels <100 mg/m³, and does not require initial waxing/polishing.
Concrete Wall and Pier Caps feature lightweight design.
Cresco Concrete Products LLC
Houston, TX 77055
Jun 28, 2013
Made from steel-reinforced cellular concrete with minimal use of sand and cement, wall and pier caps are designed to facilitate handling, reduce freight expense, as well as facilitate cutting and shaping. Pier caps typically top columns and pillars, while wall caps (wall coping) complete walls of brick, block, and cast concrete. Pier caps come in 7 ¾–40 ¼ in.² sizes and 55+ designs, while wall caps come in 5 ½–20 in. widths and 54+ designs. Both types offer various styles.
Wear Resistant Surface Treatments protect complex components.
Latrobe, PA 15650
Mar 22, 2013
Combining tungsten carbide-based materials with super alloy-based technologies, UltraFlex™ provides metallurgical-bonded, void-free cladding that extends service life of critical components in demanding environments. Treatments protect base materials such as carbon and alloy steels, stainless steels, and cobalt and nickel alloys against abrasion, erosion, corrosion, and galling. Applied in thicknesses from 0.010– 0.080 in., UltraFlex conforms to intricate shapes and small internal diameters.
Solar Panel Mounting System features 10° tilt.
Atlanta, GA 30363
Jul 17, 2012
Suited for all types of flat roof commercial system installations, CS60 10 Degree maximizes solar panel placement to take advantage of regulatory incentives. Non-penetrating, ballasted mounting system is made of high molecular weight polyethylene with direct PV panel-to-base connection that eliminates need to ground mounting system components. System features East/West Connection with 2 settings, higher front lip on South side for front module installation, and Z notch for wire management.
Continuous Aluminum Armor protects diverse cable types.
Richmond, IN 47375
Jul 06, 2012
Metal clad-rated for crush resistance, continuous aluminum armor cladding is available for standard or special cable constructions for instrumentation, control, VFD, as well as industrial communication and networking products. Armor eliminates need for conduit while facilitating installation and re-routing. Applied as continuous strip of aluminum, cladding wraps around cable and is welded at seam for impenetrability. Corrugation permits bending without kinking.
Non-staining Silicone has sanitary formulation.
Harleysville, PA 19438
Mar 29, 2012
Combining silicone durability with mildew and mold resistance, 898NST also eliminates potential for staining of natural stones such as granite, marble, and limestone. Neutral cure solution, featuring USDA acceptance, is suited for use in hospitals, schools, clean rooms, kitchens, and bathrooms. It can also be used for resetting or re-grouting ceramic or natural stone tiles.
Sound Control Mat decreases inter-floor noise in buildings.
Hacker Industries, Inc.
Newport Beach, CA 92660
Jul 16, 2010
Designed to lower overall profile of floor/ceiling assembly, FIRM-FILL® SCM consists of 3 mm sound control mat topped with ¾ in. of FIRM-FILL® Brand Gypsum Concrete. It helps limit impact sound transmission in multi-family construction, improving sound control performance as well as creating smooth floor transition between hard surface and carpeted areas. To add tensile strength and reinforcement to gypsum concrete, product is made with coated fiberglass scrim and fabric combination.
Plate helps offload non-flowing material from trailers.
Titan Trailers, Inc.
Ontario N4B 2W6 Canada
Sep 03, 2009
Constructed of wear-resistant aluminum, Titan Kicker Plate(TM) expedites offloading of non-flowing or compressed material out of trailers, while keeping drivers out of back of trailer. Unit is hinged at top of rear of trailer and kicks compressed bulk material away from walls as it is being offloaded. Plate changes flow of material from falling backward to falling forward, ensuring material is unloaded cleanly and with minimal operator clean-up.
Face Sheet is suited for use on exterior flush doors.
Decatur, MI 49045
Jun 08, 2009
Designed for use with SL-20 FRP Door, fiberglass reinforced polyester (FRP) face sheet features fine-grained sandstone texture that has subtle surface finish and less glossy appearance. Sandstone-Textured FRP is available in 4 color-through face sheets; white, beige, light grey, and dark bronze, and can also be painted any color.
Wall Cladding System helps optimize indoor air quality.
Atlanta, GA 30331
May 20, 2009
Energy-efficient StoTherm Lotusan NExT(TM) integrates StoGuard(TM) waterproof air barrier, StoTherm® insulated wall cladding, and Stolit® Lotusan® textured finish with self-cleaning properties. Consisting of spray-on building wrap, StoGuard protects against moisture intrusion and air leakage, while StoTherm provides blanket of continuous insulation that protects exterior from temperature fluctuations. Water-repellent Stolit Lotusan rinses clean with rainfall while resisting mold, mildew, and algae.
Recycled Glass Surface is available in neutral colors.
Richmond, CA 94804
May 18, 2009
Offered in 4 earth-tone colors, Vetrazzo® Recycled Glass Surface neutrals collection combines Flint Glass from recycled clear bottles and jars set in lightly tinted base. Color palette ranges from white on white (Martini Flint), to taupe (Porter Flint), to mid-range beige and khaki (Champagne and Margarita Flint). Suited for residential and commercial use, Flint collection combines 100% recycled glass in cement-based, resin-free binder.
EIFS Lightweight Base Coat has high-build formula.
Atlanta, GA 30331
Mar 23, 2009
Available in 38 lb bags, Sto BTS Xtra is used as lightweight adhesive, base coat, and leveler in StoTherm® insulated wall claddings. This single-component, polymer-modified, cement-based dry powder material uses lightweight aggregate and will build to ¼ in. to help level CMU walls or 1/8 in. for StoQuik Silver systems. Freeze/thaw- and crack-resistant product has vapor permeable nature that lets substrate breathe naturally and provides complete cover of reinforcing mesh.
Structural Reinforcement strengthens parapet walls.
CINTEC America Inc.
Washington, DC 20015
Mar 03, 2009
Tailored to meet requirements of masonry parapet and retaining walls, Paratec (PARApet TEChniques) system strengthens while remaining sensitive to original architecture. It does not narrow roadways or require rebuilding of walls and addresses problems with older masonry structures subject to wind loading, seismic movement, vehicular impact, and foundation subsidence. Solution makes use of CINTEC Reinforcing Anchor System, fashioned out of steel bar enclosed in mesh fabric sleeve.
Blast Protection System fortifies existing structures.
CINTEC America Inc.
Washington, DC 20015
Feb 04, 2009
Offered as complete diagnostic design and installation service, Blastec retrofits to masonry structures to provide protection against damage from incidents such as gas explosions or bomb blasts. Each structure is individually assessed and modeled in 3D to determine optimal reinforcement pattern. Resulting reinforcement consists of CINTEC Reinforcing Anchor System - fashioned out of steel bar enclosed in mesh fabric sleeve - and form-fitting, non-polymer, cement-like grout.
Solid Surface Material has eco-friendly composition.
Menomonee Falls, WI 53051
Nov 26, 2008
Composed of bio-based resin, pre-consumer recycled granule fillers, and other natural materials, Terreon® RE is suited for high-volume, high-abuse washrooms and industrial applications. Environmentally friendly solution, constructed with 25% pre-consumer recycled content and 8% rapidly renewable material, resists stains, burns, chemicals, and impact. It comes in 8 colors and is certified to comply with ANSI Z124.3, Z124.6, and ANSI/ICPA SS-1-2001.
Finishing Compound and Tape protect interior walls from mold.
Valley Forge, PA 19482-0860
Oct 08, 2008
ProRoc® Moisture and Mold Resistant Setting Compound is formulated for use in all stages of finishing, including filling joints, embedding fiberglass mesh joint tape, and concealing joints, fasteners, and trim accessories. Plaster-based product can be sanded when dry and is mold-resistant. Mold-X10 Mold Resistant Mesh Tape is fiberglass mesh that is self-adhesive. Complimenting ProRoc® Gypsum Board, both create finishing system for interior walls in residential/commercial applications.
Electrodes are suited for welding and cladding.
Fort Loramie, OH 45845-0259
Sep 04, 2008
Offered in .045, 1/16, and 3/32 in. dia, self-shielded electrodes are designed for welding stainless steels and cladding of carbon steels. SelectAlloy 308LTO-3 (E308LTO-3) contains nominal weld metal composition of 21% chromium and 10% nickel with maximum carbon content of .03%, while SelectAlloy 309LTO-3 (E309LTO-3) has nominal weld metal composition of 24% chromium and 13% nickel with maximum carbon content of .03%. Compositions make weld metal resistant to intergranular corrosion.
Insulation targets rain screen and cavity wall applications.
Wabash, IN 46992
Aug 12, 2008
RainBarrier(TM) 30, with 3 lb density, and RainBarrier(TM) 45, with 4.5 lb density, are engineered to repel water and drain moisture. They provide thermal insulation, fire protection, and acoustical control and are UV-resistant and noncombustible. Available in regular- and dark-colored fibers, mineral wool insulation is compatible with common wall ties, adhesives, and air barrier systems.
(Showing headlines 1 - 20) more ....
Latest Products in the News
Southland Equipment Service, Inc. - July 28, 2014
Southland Equipment is Offering Extended Limited Warranty Plans for TCM by UniCarriers® Brand Products
Linde LLC - July 28, 2014
Linde's Healthcare Division to Display new Hospital Services Platform at the National ASHE Conference in Chicago
Profit Tools, Inc. - July 28, 2014
Profit Tools Intermodal Trucking Solutions Consistently Delivers ROI for its Customers
Shop-Pro Equipment, Inc. - July 28, 2014
"The Shop of Tomorrow" at NACE Expo 2014 to Include the Mobile Work Station®
Harper International - July 28, 2014
Pulse(TM) Case Study: Partnership for Manufacturing Excellence
Leesburg Concrete Co. - July 25, 2014
Florida School District Saves Money
Labthink International,Inc. - July 25, 2014
Test System Measures Gas Permeability of Lithium Ion Battery Separators
Solon Manufacturing Co. - July 25, 2014
Solon Manufacturing Company Provides Custom Instrumentation for Successful Fusion Project
Demag Cranes & Components, a Terex Corporation Company - July 25, 2014
Demag Cranes for Two Paper-roll Stores in Thailand
Gefen - July 25, 2014
Award-Winning Gefen Solution Distributes HDMI with USB, RS-232, IR and Audio over a Local Area Network with Option to Create Virtual Matrix Switching Solution
More Products in the News...