Safe Rack, LLC
Sumter, SC 29150
Mar 20, 2008 SafeRack G4 Gangways are constructed of aluminum parts that are stamped out in tool-and-die process, allowing reproducibility yielding accurate replacement parts that can be bolted into original product. They include 90 shared parts that fold or unfold as gangway is used. Other features include slip-resistant tread on stairs, powder-coated handrails and midrails, heavy-duty bumpers, durable springs, and 4-rail design for fall protection.

K&B Duct
Greensboro, NC 27409
Mar 17, 2008 Featuring operator-proof design, AutoAire(TM) Cut-Off Gates automatically open needed duct branches when machine is turned on, while closing off inactive branches and machines. This fully utilizes pick-up power of collection system by applying as much vacuum as possible, only when and where needed, allowing smaller fan to handle system with many branches. Gates ranging from 3-9 in. in diameter use 1 air cylinder, while gates 10 in. and above use 2.

All Safety Products
Lakewood, CA 90711
Mar 17, 2008 Mobile NSF-certified portable sinks are available with single-, double-, triple-, and 4-bowl configurations depending on desired capacity, space, and application. Basins are portable and mounted on cabinets with movable locking casters. Adjustable hot water heaters and self-contained fresh water and wastewater tanks are included. Systems provide professional working surface for preparing food items and cleaning utensils in sanitary environment.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Mar 07, 2008 Made from high-density polyethylene, BioDiffuser® ARC 18 is 5 ft long with secure joint connection that enables units to be installed in straight or contoured applications. Diamond plate traction pattern on external corrugations provides non-slip surface, while optional side port coupler snaps onto chamber for clean-out access and to provide additional plumbing options. Corrugated design optimizes load bearing in trench, meeting H-10 (16,000 lb/axle) specification.

Universal Forest Products
Grand Rapids, MI 49525
Mar 04, 2008 Suitable for decks, porches, and balconies made from wood, composite, or concrete, E2A(TM) Kit Series features interchangeable components, including round and rectangular aluminum balusters, tempered glass balusters, straight and angled rail connectors, and decorative planter or solar-powered post caps. Rust-resistant kits are 36 in. high and come in both 6 ft line and 6 ft stair sections. Powder-coated components are available in green, clay, white, or black finish.

West Development Group
LaGrange, OH 44050
Feb 29, 2008 System 14(TM) is comprehensive roofing solution that delivers complete range of products, including silicone sheet goods, skylight glazing, silicone sealants/coatings, and spray polyurethane foam (SPF) insulation. It features zero VOC coating (HSS 535) applied over soy-based SPF, creating moisture-resistant seal. Silicone topcoat forms self-flashing seal that resists oxidation, wind-driven rain/snow, ozone, and chemicals, and offers resistance to cracking and peeling.

Ohio Gratings, Inc.
Canton, OH 44706 1943
Feb 22, 2008 PressLock Fencing is offered in 8 stock configurations - Modular, Guardian, Palladium, Perimeter, SafeGuard, Screen, Tuscan, and Urban - for all types of industrial, commercial, and architectural applications. Combining aesthetics and security, mesh sizes and panel configurations can be manufactured and fabricated to end-user requirements. Fencing has no surface crazing or fading and features galvanized finish and polyester powder coating for corrosion protection.

Georgia-Pacific Corp.
Atlanta, GA 30303-1801
Feb 20, 2008 Nautilus(TM) OSB panels have pre-applied weather-resistant barrier that eliminates need for separate building wrap installation. By combining sheathing and building wrap, product promotes process efficiency for builders and contractors. These code-compliant panels can also resist rain and moisture during construction period. When seams are sealed with code-compliant Nautilus 3 in. wide seam tape, walls are protected against air leaks.

Eagle MHC
Clayton, DE 19938
Feb 20, 2008 Designed for installation where NSF construction is not required, Utility Sinks are made from 16-gauge stainless steel and feature legs with adjustable bullet feet. Legs are made of galvanized tubing and are located directly under sink bowls for maximum weight support and stability. With bowls ranging from 18 x 18 in. to 24 x 36 in., sinks are available with optional detachable or welded drain boards made from heavy-gauge Type 304 or Type 430 SS.

FCI
Etters, PA 17319
Feb 13, 2008 Integrating 25 high speed differential signal pairs in square centimeter or 161 signal pairs in square in. of board area, TwinMezz(TM) supports 6 different connector heights to offer 20 different stack heights in range of 12-40 mm. Open pin field structure allows for custom pin assignments so speed and signal density can be optimized, while BGA connector termination enables attachment to PCBs. With optimized wiring patterns, transmission rates of 25 Gbps or higher are achievable.

Linear Corp.
Carlsbad, CA 92009
Feb 11, 2008 Designed for residential applications, LRA (Linear Residential Actuator) is electro-mechanical screw drive with 24 Vdc motor that utilizes APeX(TM) gate operator controller. Made of aluminum, weather resistant unit has usable stroke length of 16 in., and can be used in single or dual-gate installations. It features magnetic reed limit switches built into arm for mechanical setting and repeatability, on-board, low-voltage surge protection, and plug-in loop detector capability.

All Safety Products
Lakewood, CA 90711
Feb 11, 2008 Molded from UV-resistant polymers suitable for internal and external applications, 12 V Handiwash(TM) provides dual water hot and cold spigots with capacity of 2.2 gallons, which is about 10-15 normal hand washings. Hot water element thermostatically controls water temperature to 120°F. Supplied with vehicle mounting bracket, portable CSA Certified system can be mounted to any vertical surface that provides enough clearance.

Cultec, Inc.
Brookfield, CT 06804 1830
Feb 08, 2008 Measuring 30.5 in. high x 52 in. wide, and 8.5 ft long, Recharger® 330XL holds nearly 475 gallons and will provide minimum of 80 cu ft of storage when surrounded in stone. Two side portals allow manifolding to take place at any point within system, eliminating need to build external manifolds. Constructed of high-density polyethylene for chemical resistance, chamber can accept up to 24 in. dia pipe into endwall when greater flow rates are required.

Strongwell
Bristol, VA 24203
Feb 06, 2008 Resistant to impact as well as corrosion and rot, STRONGRAIL(TM) is constructed of pultruded fiberglass and assembled via internal molded connectors that snap together for smooth finish with no visible connectors. Railing meets IBC 2006 requirements with 2:1 factor of safety and can be customized to meet ADA requirements. Designed for minimal thermal and electrical conductivity, top railing can be square or rounded, and pickets can be square or round.

Meyda Tiffany
Yorkville, NY 13495
Feb 06, 2008 Featuring Fused Art Glass shades, ADA Wall Sconces are suspended by nickel finished powder-coated hardware. Biscotti is amber-colored art glass sprinkled with chips and streamers of hot glass fused together, while Muro Rossa features molten red hot-colored art glass sprinkled with chips and streamers of glass, and measures 8 x 11 in. Measuring 11 x 11 in., Oasis has seafoam green art glass with hot sculpted palm trees backed with frosted bent glass.

Valspar Corp., The
Wheeling, IL 60090
Feb 05, 2008 Drying in as little as 2 hr, polyurethane Valsport WP-4.1 Fast Dry 350 Sanding Sealer is formulated to seal bare wood floors and produce optimum clear surface for finish coats. Valsport WP-8.1 Sports Floor 350 Finish is clear and ages to naturally golden amber while protecting wood. Both durable oil-modified urethanes have VOC levels of less than 350 g/L and can be used individually with compatible products or together as complete wood finishing system.

Sonoco
Hartsville, SC 29550
Feb 01, 2008 Producing smooth columns without any manual finishing, Sonotube Finish Free concrete forms feature Duraglas® coating on inside that eliminates spiral marks, seams, and imperfections that would otherwise be left on finished surface of concrete. Available in 12-36 in. dia sizes, forms are made with Rainguard(TM) technology to prevent moisture damage. Lightweight units can be moved and placed for pouring, and RipCord(TM) feature helps remove forms after the concrete sets.

Rhino Linings USA
San Diego, CA 92121
Jan 30, 2008 Formulated with aliphatic chemistry, FastFloor(TM) hybrid polyurea coating solution bonds to various substrates and has rapid cure capability that supports light foot traffic within 2-4 hr. FastFloor HB is formulated for industrial floors, while FastFloor DF utilizes paint chips, colored quartz, or other flakes for decorative floors. Both 2-component and color-stable products, applied with hand-roller, brush, or squeegee, are resistant to abrasion, impact, chemicals, and UV exposure.

Cooper Lighting
Peachtree City, GA 30269
Jan 29, 2008 Available in natural aluminum as well as 15 additional finishes, Shaper Craftsman Series includes Model 440 flared square pendant, Model 640 matching tapered wall sconce, and Model 240 companion surface luminaire. Units offer indirect or direct/indirect illumination with downlight option, and come in incandescent or CFL options. UL/cUL listed for indoor applications, pendant measures 36 x 36 in., while wall sconce measures 18 x 9¾ in., and surface fixture measures 24 x 24 in.

Hacker Industries, Inc.
Newport Beach, CA 92660
Jan 25, 2008 Formulated for use in buildings with light-gauge steel framing and corrugated steel deck, FIRM-FILL® CSD(TM) poured gypsum concrete floor underlayment assists builders and developers in constructing safe and durable projects. It offers minimum compressive strength of 3,500 psi and dries in approximately 10 days. Under standard drying conditions, product sets in 2 hr and tolerates light trade traffic on following day. Product installs at 1 in. above top of steel deck flutes.