Designed with T-Rail mounting system for dead-front panels, swing-out panels and layering subpanels, Premium Series Polycarbonate Enclosures consist of hinged screw cover and single-door hinged cover with non-metallic latch models. Featuring mounting flanges, integrated latch and interior mounting bosses, unit with standard hinge provides 225-degree door swing. Products are operated in -40°F... Read More
Compact, easy-to-use Bluetooth tool is USB-powered, offers No Hassles Decoding - just plug into the USB port and go!
Fairport, NY: Saelig Company, Inc. has announced the availability of the BPA low energy Bluetooth Protocol Analyzer from Teledyne LeCroy - a powerful, portable protocol analyzer for wireless transmissions that adhere to Bluetooth low energy specifications. Ideal for field... Read More
UTUBE NUMBER: 3462
MANUFACTURER: UNIVERSAL / KENT / YODER
Line Direction: Right to Left
Driven Spindle Diameter: 2.5" (63.5 mm)
Maximum Tube Diameter: 3.125" (79.3 mm)
Minimum Tube Diameter: 1" (25 mm)
Maximum Round Wall Thickness: .134" (3.4 mm)
Maximum Shapes Wall Thickness: .120" (3 mm)
Minimum Wall Thickness:... Read More
May 26, 2017 - Lindberg/MPH announced the shipment of a Heavy Duty Box Furnace to a global provider of material and technology solutions. This box furnace will be used for processing glass. The furnace design was customized to the customer’s specifications by moving the heating elements that are typically designed to be mounted on the roof and floor of the furnace to the sidewalls. This... Read More
Lindberg/MPH Ships Electrically Heated Hand-Tilting Aluminum Melting Furnace to the Die Casting IndustryMay 22, 2017
May 16, 2017 – Lindberg/MPH announced the shipment of an electrically heated hand-tilting aluminum melting furnace to the sand casting industry. The furnace will be used as a central breakdown for transfer via bull ladle.
The resistance melting furnace has a melt rate of 50 lbs. per hour and can accommodate a crucible with a holding capacity of approximately 150 lbs. of molten... Read More
Hygiene, neatness and convenience are key elements of new products
SHEBOYGAN, Wis. - May 18, 2017 - Today's customers are concerned about health, and with good reason. According to a recent study, only 5 percent of people wash their hands long enough to thoroughly remove harmful organisms. Driven by such consumer demand for sanitary products, The Vollrath Company, LLC, has increased... Read More
Wurth Electronics Midcom Transformers Approved for Use with SHDSL- 1 Channel, 2 Channel, and 4 Channel ApplicationsMay 22, 2017
Watertown (USA), 18 May 2017 – Wurth Electronics Midcom announces new data isolation transformers for use in SHDSL applications. These MID-DSLITL transformers are built on a self-shielding EP package, offer excellent longitudinal balance and very good THD performance. They are designed to meet UL & IEC standards and a dielectric of 1500VAC.
“SHDSL is the best technology available in... Read More
Visit the Phoseon exhibit to learn more about LED curing for printing applications
HILLSBORO, OR - Phoseon will showcase the latest UV LED curing solutions for printing applications at the upcoming TopCon & IMDA Symposium 2017 event in Lincolnshire, IL. Visit the Phoseon exhibit to learn how Phoseon LED technology is a perfect fit for printing applications due to the compact size, ease... Read More
Last month, we described the considerations associated with predicting filter service life and how total throughput can be estimated through experimentation. In this second installment, we will examine four filter selection strategies for maximizing service life in continuous-use applications. These aspects consider chemical compatibility, temperature, binding characteristics, and pore... Read More
L&L Special Furnace Co., Inc. has delivered a second car bottom furnace used for curing complex ceramic composites, silicon carbide plates and military-grade armaments. The cycles require extremely slow heat-up and cooldown curves, which are critical for the end product.
The curing process is achieved by heating the parts very slowly to drive off moisture without affecting the part... Read More
Bulk Liquid Storage Solutions for the Paper Making Industry - Avoid Contamination of Latex & Other Specialty CoatingsMay 22, 2017
Aero Tec Laboratories Inc. (ATL), of Ramsey, NJ, the world leader in flexible containment technology since 1970, offers its bulk liquid storage solutions to the paper manufacturing industry. ATL's rugged, fully collapsible mil-spec fabric tanks are often used to store sensitive substances, such as latex, that are used in the paper production process.
ATL's flexible rubberized... Read More
The SINOCHRON® Motor design offers advantages in continuous duty applications. The efficiency is also better in partially loaded duty cycles, when compared to standard asynchronous motors. Drive units are virtually loss-free in no-load operation. This motor design offers advantages in powering conveying equipment; escalators, spooling machines, compressors and traction drive units amongst... Read More
Balance your data processing signals passively!
The ETS CT-710, 720, 730, 740 Series of baluns and panel enables G.703 equipment to use and operate over UTP cable. The E1/T1 baluns and panels convert the unbalanced G.703 signal 75 ohm coax from the router to a well balanced 120 ohm for E1 (100 ohm for T1) signal for low loss transport.
All ETS E1/T1 Baluns and Panels are passive... Read More
Housed in aluminum package, 90-Line-D Alignment Accessory features adjustable knobs for locking laser beam position and fine angular control. Used for aligning and checking planer squareness and parallelism on assemblies, machinery and equipment, unit comes with anodized protective coating. Equipped with rotatable nosepiece, product comes with alignment detector.Read More
Featuring magnetic spindle coupling for rapid attachment and release of KU spindles, KU-3 Krebs Unit Viscometer provides measurement range of 40 to 141 KU, 32 to 1099 gm, and 27 to 5274 cP with ±1% accuracy. Meeting RoHS and ASTM D562 standards, unit is used for measuring viscosity of paints and coatings. Viscometer provides continuous sensing and displays in Krebs units, grams or... Read More
Available with travel ranges from 6 to 20 in., LMS-180 Linear Stage offers smooth motion with 15 nm resolution and repeatability down to 0.05 microns. Unit delivers 500 mm/sec maximum velocity when driven with SMC Hydra closed-loop motion controller. Equipped with ironless electromagnetic linear motor, unit’s recirculating ball bearings provide 250N load capacity. Product also comes with... Read More
Featuring top opening of 52 in. x 58 in. and capacity of 3 cu-yds, CP-3002 Compactor with dual cylinder design provides cycle time of 52/89 sec. Offering volume displacement of 140/100 cu-yds/hr, compactor delivers force of 101,800/138,500 lb. Unit is suitable for retail outlets, transfer stations and warehouses applications.Read More
Allowing non-stop production for rolls up to 36 in. diameter and weighing up to 900 lb, 800-PB-VF- 36 Semi-Automatic Splicer features turret design for easy roll lifting directly from floor. Designed with splice table pivots, PLC control and tape dispenser, unit’s splice prep signal tells operator when to load new roll. Using festoon feedback to pneumatic braking system, product offers... Read More
Suitable for pharmaceutical, medical, food and dairy processing applications, ETX Scraper Seals are machined from Ertalyte® PET-P.0020. Available for closed linear bearings and closed pillow and flange blocks, scraper seals keep bearings free from debris and bacterial contamination. Having continuous service temperature up to 210°F, units are designed with slight interface between shaft and... Read More
Suitable for stainless steel, alloy steels, cast iron and non-ferrous materials, Force X Solid Carbide Drill comes with titanium aluminum nitride coating. Edge preparation, corner design and 140° split point geometry features are available on 3 x D R457, R458 and 5 x D R453 and R454 models. Offering solid and coolant feed options, unit with micrograin carbide substrate increases wear... Read More