Rhino Hide LLC
Eaton Park, FL 33840
Nov 28, 2008 Available in widths of 1 and 3.5 in., High Bond Acrylic Transfer Tape (HiBATT) permanently adheres to PE and PP film, PVC, metal, and wood, and suits applications including plastic sheeting, carpeting, flooring and signs. Two-sided sealing and bonding scrim tape is supplied on siliconized paper release liner, and is resistant to temperature fluctuations, UV damage, aging, and water vapor. Tape expands and contracts with substrate, and won't crack, become brittle, or shrink.

Scapa North America
Windsor, CT 06095
Nov 26, 2008 Designed to perform consistently over range of temperatures without edge ooze, Scapa 448 can be torn by hand and bonds to variety of substrates including poly films. Product consists of polyethylene coated cloth single-coated with 5.5 mils natural rubber adhesive. Tape will not twist or curl during application and is suited for taping metal ductwork, hanging poly sheeting, and general-purpose bundling and sealing.

Krylon Products Group
Cleveland, OH 44115
Nov 24, 2008 Available in both multi-purpose and heavy duty formulas, White Lightning® industrial spray adhesives can bond paper, metal, plastic, wood, and cardboard. Providing low soak-in factor, multi-purpose formula dries quickly and has controlled mist spray pattern. With ability to resist heat up to 170°F, heavy duty version has variable volume controlled, lace spray pattern.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 21, 2008 Featuring viscosity of 700-800 cps, Master Bond EP29LP multi-purpose 2-part optical epoxy has low exotherm to peak of 120°F . It adheres to optical fibers, connectors, lenses, and glass and forms high strength bonds of more than 3,500 psi in shear. With temperature range of 60-250°F, epoxy has chemical resistance to water, fuels, acids, bases, and salts.

Scapa Medical
Inglewood, CA 90302
Nov 20, 2008 Suited for wound care, consumer dressings, and medical device attachment, Scapa 4005-800A consists of 0.43 mm tan polyurethane foam coated on one side with medical-grade acrylic adhesive system. Conformable, pressure-sensitive tape is supplied with white kraft release liner. Since it is moisture vapor permeable, tape allows optimal healing.

Integran Technologies Inc.
Pittsburgh, PA 15241
Nov 17, 2008 Designed to provide low frequency magnetic shielding to polymer, composite, and metal parts, Nanovate(TM) EM coating can be applied selectively, allowing shielding performance to be focused where it is needed on part. Coating can be used to stiffen and strengthen shielded polymer, composite, and metal substrates. Product suits sensors, transducers, and other applications sensitive to low frequency magnetic interference.

Del City
Milwaukee, WI 53209
Nov 14, 2008 Suited for wrapping, protecting, and color-coding, Duct Tape provides moisture-resistant seal on nearly any surface and shape. Multi-purpose tape can withstand temperatures up to 200°F and has tensile strength of 22 lb. Polyethylene film blankets entire length of rubber adhesive on standard 1.88 in. x 150 ft roll.

Dow Corning Corp.
Midland, MI 48686 0994
Nov 13, 2008 Curing to flexible gel for chip sealing and protection of lens-type LED devices, 2-part DOW CORNING® OE-6450 offers stress relief, moisture protection, and UV resistance. Product features penetration value of 45 for impact resistance and refractive index of 1.54 to maximize light transmittance. Gel offers minimal moisture absorption and is compatible with lead-free solder reflow manufacturing processes.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 10, 2008 Bonding to similar and dissimilar substrates, EP13 single-component epoxy adhesive requires no mixing and has unlimited working life at room temperature. It exhibits dimensional stability, is 100% reactive, and does not contain any solvents or diluents. Able to be applied to vertical surfaces without sagging or dripping, adhesive cures within 60-90 minutes at temperatures of 300 to 350°F. Readily machinable product, upon cure, obtains tensile shear strengths in excess of 3,500 psi.

Henkel
Rocky Hill, CT 06067
Nov 04, 2008 Designed to lock and seal threaded fasteners, Loctite® 2046(TM) medium-strength, removable 2-part anaerobic threadlocker cures at room temperature and prevents bacteria growth between fastener's threads. Suited for use on fine and coarse threads, adhesive withstands temperatures up to 400°F, requires no primer when used on SS equipment, and can be disassembled with hand tools. System includes 3 mixing tips that ensure proper proportions and full-cure characteristics.

Conductive Compounds, Inc.
Londonderry, NH 03053
Nov 04, 2008 Silver-filled, 2-part EP-600 attaches components, such as resistors, LEDs, and grounding wires to metal and plastic substrates where high temperature curing cannot be used. Electrically conductive product cures at temperatures from 20-140°C with cure times from 48 hr to 2-6 min, depending on temperature. Available in pre-weighed pouches, EP-600 works in high-speed automated dot dispense and screen printing production machines, as well as handheld dispensing equipment.

Scapa North America
Windsor, CT 06095
Oct 29, 2008 Featuring release liners on both sides for optimal firmness, Scapa 707 is made up of polyester film double-coated with silicone adhesive on one side and acrylic adhesive on other. Conformable tape contours to intricate parts and provides chemical resistance. Pressure sensitive adhesive (PSA) film adheres to silicone gaskets, foams, and sponges over operating temperature range of -20 to +350°F, and acrylic adhesive also bonds to plastic, glass, and metal substrates.

Scapa North America
Windsor, CT 06095
Oct 24, 2008 Offered on 4 mil red HDPE release liner, Duofoam S4032-PE, S4016-PE, and S4008-PE white polyethylene foam tapes have 1/32, 1/16, and 1/8 in. foam carriers, respectively. They are suited for bonding, mounting, cushioning, gasketing, spacing, and sound attenuation applications. Double coated with pressure sensitive acrylic adhesive system, tapes can conform to irregular surfaces, provide thermal insulation properties, and perform in range of temperatures.

Adchem Corp.
Riverhead, NY 11901
Oct 24, 2008 Based on high performance acrylic technology, models 7772 and 7775 transfer adhesives are available in 2 and 5 mL thickness, respectively, and offer shear resistance at both room and elevated temperatures. Properties include good peel adhesion to materials with high surface energy and balanced peel adhesion to surfaces with low energy. Products are suited to bonding with plastic surfaces such as polycarbonate, ABS, and talc-filled polypropylene.

Pres-On Products, Inc.
Addison, IL 60101
Oct 23, 2008 Offered as general-purpose solution, PF-1400 low-density, closed cell polyethylene foam tape addresses need for long-lasting sealing, insulation, sound dampening, and cushioning. Wear-resistant product is coated on one side with high-tack rubber adhesive, protected by paper release liner. It will bond to any clean substrate, including irregular surfaces where it conforms to shape a positive seal. Functional temperature for adhesive is 0 to +140°F.

Adhesives Research, Inc.
Glen Rock, PA 17327
Oct 21, 2008 Combining acrylic adhesive with flexible foam carrier, ARclad® 8416 and ARclad® 8516 are double-sided black and white tapes, respectively, that offer resistance to moisture, humidity, and heat. Products offer cold flex, low odor, and cyclic shock resistance. Creating immediate bond with no cure time, tapes are suited for sealing window assemblies in plastic, vinyl, metal, and wood framing systems.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 21, 2008 Ceramabond(TM) 885 high temperature, phosphate-bonded, zirconia-filled, water-based formulation bonds to zirconium oxide along with variety of other ceramic and glass products. It offers dielectric strength of 250 V/mil, tensile-shear strength of 500-600 psi after exposure to 1,000°F, less than 1% of shrinkage upon curing, and exhibits no outgassing. Supplied as single part dispensable paste, adhesive can be applied using hand-tool or automatic dispensing system.

Conductive Compounds, Inc.
Londonderry, NH 03053
Oct 17, 2008 Silver-filled, 2-part epoxy adhesive (EP-600) is designed to attach electrical components to metal/plastic substrates. It accelerates manufacture of PTF circuits built on temperature-sensitive substrates and cures at temperatures from 20 to 140°C with times from 48 hr to 2-6 min; snap cure times are possible at higher temperatures. Elasticity allows for differences in thermal expansion properties of bonded components and for flexing/bending substrates without fracturing SMT joints.

Momentive Performance Materials
Strongsville, OH 44149
Oct 16, 2008 Formulated without plasticizers, SPUR+ 3100HM and SPUR+ 3200HM high modulus, low viscosity prepolymers contain no free isocyanates, and are suited for use as binding agents in structural adhesive formulations. When cured alone, SPUR+ 3100HM provides tensile strength of 450 psi and Shore A hardness of 40, while SPUR+ 3200HM offers 1,000 psi tensile strength with Shore A hardness of 60. Shelf life of products is approximately 12 months.

Dow Corning Corp.
Midland, MI 48686 0994
Oct 15, 2008 Suited for use in close proximity to sensitive electronic and electrical devices, type SE 1720 CV silicone adhesive starts adhesion to polybuthylene terephthalate (PBT) substrates in 5 min with full adhesion in 30 min at 80°C. Adhesive also suits automotive applications such as case sealing and attaching electronic components for underhood controllers; chassis and brake applications such as steering controllers; and high-power electronics used in hybrid electric vehicles.