Michelman Inc.
Cincinnati, OH 45236
Mar 13, 2009 Self-priming Flex HS-100 can be applied directly to variety of stock and untreated films using only corona, plasma, or flame pre-treatment. Product has ability to seal to itself from low temperature of 60°C to above melting point of polypropylene. Requiring just 1-2 dry microns of coating, Flex HS-100 produces clear and transparent finish and is food contact compliant. It has been tested on BOPP, BOPET, BOPA, Cellulose, and PLA films.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Mar 13, 2009 CHEMSEAL+5 is pre-compressed, primary seal for expansion and construction joints where contact with chemicals and chemical dilutions is expected. It is composed of nonstaining, microsphere-modified-acrylic-impregnated foam backing, which is precoated with chemical-resistant polysulfide sealant. Able to resist water pressure of up to 5 ft without product deflection or leakage, sealant is suited for submerged or intermittent-contact applications.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Feb 18, 2009 Comprised of hybrid silicone and impregnated precompressed foam sealant system, UL/ULC-Certified EMSHIELD DFR2 is suited for use in new/retrofit construction and infrastructure applications for containment of fire at structural expansion joints. It can withstand vehicular and other traffic; handle thermal-, traffic-, wind-, and seismic-induced movements; and provide waterproofing protection of adjacent building materials, all while providing life-safety protection of 2 hr fire rating.

Ellsworth Adhesives
Germantown, WI 53022
Jan 06, 2009 Consisting of polybutadiene modified polyurethane, UR3005 features water pickup of less than 1% during immersion at 60°C. Product adheres to many plastics and metals, gels in 10-20 min, and reaches full cure in 24 hr. As medium soft encapsulant, UR3005 induces little stress on sensitive parts, such as PCB level components and associated solder joints. Two-part system has 6:1 mix ratio and should be dispensed using meter mix dispense equipment.

Cotronics Corp.
Brooklyn, NY 11232
Dec 22, 2008 Resbond 907TSG Thread-Locker Gel provides thermally stable, electrically insulating, and chemical- and corrosion-resistant seals and is designed for pipe, screws, nuts, bolts, fasteners, etc. Curing at room temperature, Mil-I-45208 gel is packaged in 4 oz applicator bottles, each providing up to 2,000 applications. It is available in Blue Standard for general purpose, Red High Strength for vibrating applications, and Gold High Strength versions to fill large gap widths.

Anti-Seize Technology Industries, Inc.
Franklin Park, IL 60131
Dec 05, 2008 Formulated to thick paste consistency, TFE Pipe Thread Sealant fills thread imperfections and provides leak-proof joints that seal for life of connection. Non-hardening product contains no solvents, seals immediately, and prevents corrosion, seizing, and galling. Designed to withstand temperatures to 500°F and liquid pressures to 10,000 psi, sealant is suitable for all pipe threads made of cast iron, malleable, brass, copper, and stainless steel.

Dow Corning Corp.
Midland, MI 48686 0994
Nov 13, 2008 Curing to flexible gel for chip sealing and protection of lens-type LED devices, 2-part DOW CORNING® OE-6450 offers stress relief, moisture protection, and UV resistance. Product features penetration value of 45 for impact resistance and refractive index of 1.54 to maximize light transmittance. Gel offers minimal moisture absorption and is compatible with lead-free solder reflow manufacturing processes.

ISP Industrial Support Products Ltd
Swallowfield   United Kingdom
Oct 13, 2008 Supplied in safe and self-contained bag, GELSEAL is capable of transforming standard electrical enclosures up to and beyond IP68 rating while offering re-enterabilty and protection against water, moisture, dust, and dirt. Non-toxic gel system, designed for facilitated pouring as well as optimal adhesion and dielectric properties, is suited for encapsulating, sealing, potting, insulating, and shock dampening. It can also be used for application in trunking and pipes.

Dymax Corp.
Torrington, CT 06790
Oct 02, 2008 With high adhesion to plastics, Light Weld® GA-140 soft gasket material provides barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances. UV/Visible light-curable form-in-place and cure-in-place gasket is used for sealing fuel cells, appliance housings, and electronic assemblies. Low out-gassing unit can be dispensed into intricate and complex configurations with benefit of in-line curing, and its viscosity allows for varying bead heights.

Fomo Products, Inc.
Norton, OH 44203
Sep 29, 2008 Utilized for patching and repairing polyurethane roofs, Handi-Foam® SPF Roof Patch has R-value of 6.1/in., retaining insulation value and meeting commercial roofing codes for compression strength of polyurethane foam roofs. Offered in portable kit that includes Handi-Gun®, it maintains monolithic seal preventing air/moisture infiltration, and suits maintenance and repair work on HVAC systems. Foam has tack-free cure time of 30-45 sec and 2.5 lb density foam that can yield 425 board ft.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 26, 2008 Available in ½ pint, pint, quart, gallon, and 5 gal kits, Master Bond EP30 features low viscosity, chemical resistance, dimensional stability, hardness, optical clarity, and electrical insulation properties. It is used in potting and encapsulating electronic components as well as in bonding optical elements, and has adhesion to metals, ceramics, glass, and plastics. EP30 has lap shear strength exceeding 3,000 psi for aluminum to aluminum bonds, and low shrinkage upon cure.

Electronic Materials, Inc.
Breckenridge, CO 80424 8817
Sep 08, 2008 OPTOCAST AC-3716 100% solids, low viscosity, 1-component, acrylate-based formulation can be cured almost instantly with exposure to ultra violet light in 320-380 nm wavelength range or with heat to cure shadowed areas. It cures to soft, compliant material with Shore A hardness of 60-62. OPTOCAST AC-3716 exhibits excellent adhesion to variety of metal, ceramic, and glass-filled epoxy surfaces.

Electronic Materials, Inc.
Breckenridge, CO 80424 8817
Sep 08, 2008 OPTOCAST AC-3716 100% solids, low viscosity, 1-component, acrylate-based formulation can be cured almost instantly with exposure to ultra violet light in 320-380 nm wavelength range or with heat to cure shadowed areas. It cures to soft, compliant material with Shore A hardness of 60-62. OPTOCAST AC-3716 exhibits excellent adhesion to variety of metal, ceramic, and glass-filled epoxy surfaces.

Hilti Inc.
Tulsa, OK 74121
Aug 28, 2008 For firestopping top of wall, expansion, and edge of slab/curtain wall joints, CP 672 Fast Cure Speed Spray is paintable and designed for use with concrete floor assemblies. Applicable by spray or brush, water-based mastic makes spills and over-spray quick to clean up. Containing no halogens, solvents, or asbestos, spray meets LEED requirements for indoor environmental quality. Product can be applied with SprayTech EPX 2355 or EPX 2555 sprayers.

Amerimax Building Products, Inc.
Plano, TX 75024
Aug 22, 2008 Formulated as resilient paint system, Aluma-Shield with Teflon® combines semi-gloss finish washability and matte finish aesthetics. Surface, which is resistant to chalking, fading, cracks, peels, warps, and termites, also repels oil, dirt, dust, and stains. Product withstands effects of UV rays, salt, pollution, and weathering.

Pecora Corp.
Harleysville, PA 19438
Aug 20, 2008 Manufactured in one color and single limestone 5 gal unit configuration, Tilt-Seal(TM) is one-component, solvent-free, non-toxic, and environmentally friendly water-based acrylic latex sealant that comes with low VOC content, and features color stability and resistance to ultraviolet rays, ozone, and airborne contaminants. It can be painted within 24 hr, enables easy clean-up with water, and offers primerless adhesion to pre-cast concrete.

DeWAL Industries, Inc.
Saunderstown, RI 02874
Aug 13, 2008 Designed to minimize friction and wear on high-speed extrusion coating equipment, pressure-sensitive DW 663 combines filled PTFE film with high-temperature silicone adhesive. Product is orange/brown in color and available in widths from 0.25-20 in. and 36 yard lengths. With temperature tolerance up to 500°F, tape is suitable for wrapping rollers that produce polyethylene coatings and laminations, calender paper, and revolve at very high speeds.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 12, 2008 Mixed in ratio of 100 parts powder to 16-18 parts water by weight, Ceramacast(TM) 675-N aluminum nitride filled, thermally conductive compound is suited for potting high temperature electrical components. It features thermal conductivity of 100 W/m-K, dielectric strength of 300 V/mil, volume resistivity of 1,013 Wcm at room temperature, and compressive strength of 2,000 psi. Chemical and moisture resistant product sets fully at room temperature in 16 hr or is cured at 200°F in 2-4 hr.

Henkel
Rocky Hill, CT 06067
Jul 30, 2008 Loctite® 5510(TM) and Loctite 5570(TM) are primerless, one-component, odorless adhesives that cure by reacting with ambient moisture and achieve functional strength in 24 hr. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands ongoing shock/impact. Available in clear or white, Loctite 5570 replaces mechanical fasteners and rivets while also providing vibration- and sound-dampening benefits.

Wacker Chemical Corp.
Adrian, MI 49221
Jul 28, 2008 Available in 1- and 2-component systems based on polyorganosiloxanes, SEMICOSIL® UV Elastomers cure at room temperatures within minutes. Curing rate can be controlled by appropriate selection of elastomer, UV dose, and process temperatures. Product generates no by-products during curing, making it suited for encapsulation of electronic components.