TruSeal Technologies Inc.
Beachwood, OH 44122
Feb 11, 2004 PURFECT GLAZEâ„¢ warm applied adhesive glazing sealants bond glass to window sashes or frames. Sealant technology utilizes polyurethane reactive hot-melt adhesives and allows users to wrap windows within 5 min. Once glass is bedded, products provide immediate handling strength. Sealants are available in 3 grades: PURFECT GLAZE G for general insulating glass (IG) applications, SA for special IG applications, and H for high-strength IG applications.

Cotronics Corp.
Brooklyn, NY 11232
Feb 04, 2004 Offered as alternative to anaerobic sealants, Resbond(TM) 507TS is non-corrosive; adheres to threads, studs, and pipes; and cures to form thermally stable and electrically insulating joints. Product prevents vibration loosening and leakage caused by shock and vibration in high-temperature applications. Preparation requires users to mix and apply, and product cures in 2-4 hr at room temperature. Material has no flammable solvents or harsh odors.

Chemline Inc.
St. Louis, MO 63103
Jan 15, 2004 EURO-SEAL 7000 polyurethane encapsulant, suited for use on carved architectural EPS and polyurethane foam elements, provides protection from thermal expansion and UV degradation and strengthens mechanical impact resistance. Able to dry to touch within 10 sec, 2-component, spray-applied polyurethane coating forms hard, chemical-, moisture-, and fire-retardant encapsulation. It enables fabricators to coat foam parts in production-line fashion.

Tra-Con, Inc.
Bedford, MA 01730
Jan 12, 2004 Tra-Bond 813J01 offers thermal conductivity constant of 1.1 W/M/°K, making is suited for encapsulating heat generating devices such as transformers, thermistors or power sources, and pour-in-place heat sinks. Operating temperature is 260°C, but with Tg of -120°C, Tra-Bond 813J01 can deal with stress issues and mismatched CTEs. It can be cured at room temperature, or in only minutes at elevated temperatures. Working life is 100 min.

Cotronics Corp.
Brooklyn, NY 11232
Nov 26, 2003 Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite is rated to 2,000°F. All are applied by trowel without running, dripping, or sagging.

Tra-Con, Inc.
Bedford, MA 01730
Nov 19, 2003 Soft and flexible, Tra-Bond 927-1 is brown in color with viscosity of 40,000 cps. High volume resistivity and dissipation factor of 0.230 make it suited for applications requiring no electrical conductance. Registering 55 on Shore A scale for hardness, product offers impact resistance and is also resistant to aviation fuels and oils.

Gore, W. L., & Associates, Inc., Industrial Filtration Technologies
Elkton, MD 21921
Nov 17, 2003 GORE-TEX® creep-resistant, form-in-place gasketing material is made from GORE-TEX® expanded PTFE, which is impervious to most chemicals, suitable for use from -450 to +600°F, and able to withstand pressures to 3,000 psig. Tight-sealing product, suited for most types of sealing applications, is also suited for use in chemical processing plants.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 03, 2003 Ceramacoatâ„¢ 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 10⁹ ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no VOCs, and no outgassing will occur upon cure or during operation.

Solar Compounds Corp.
Linden, NJ 07036
Sep 17, 2003 Solarite SI-200 Series Room Temperature Vulcanizing (RTV), 2-component, electrical potting and casting silicones are available in hardness ranges from 80A (semi-rigid) to 00 (gels). Gels are re-enterable and cure to elastic Shore 00 form with no surface residue. Products are UL-94V-0 approved, cure with high gloss, and produce void-free castings in potted electrical devices. Characteristics include non-corrosive cure, flame retardancy, and vibration resistance.

Biotech Solutions
Mt. Laurel, NJ 08054
Aug 25, 2003 Sterile and non-sterile 96-Well Pattern Sealing Film has no adhesive around wells to prevent tacky/sticky adhesive from adhering to plastic pipette tips or metal probes. Employing solvent-free adhesive, sealing film is available in 2 or 5 mil thick Teflon, which is compatible with aqueous solutions and organic solvents and is pierceable with single/multichannel pipettors and robotic probes. Product adheres to polypropylene, polystyrene, and polycarbonate materials.

Bettcher Industries, Inc.
Vermilion, OH 44089
Aug 12, 2003 Single-component, heat-curing EP17 is chemically resistant and bonds to substrates such as metals, glass, ceramics, vulcanized rubbers, and plastics. With operating range of -300 to 600°F, 100% reactive product contains no solvents or diluents and will not sag or drip on vertical surfaces. Product cures at temperatures from 300–350°F in 60–90 min and has tensile strength is 8,700 psi, Shore D hardness of 90+, and compressive strength of 13,000+ psi.

Kester Solder Co.
Des Plaines, IL 60018
Aug 06, 2003 With blue color to aid visual inspection, SE-CURE® 9126 single-pass reflow encapsulant is suited for mounting eutectic tin/lead flip chip and fine-pitch chip-scale packaging (CSP) components to rigid substrates. Single-component, liquid, epoxy-based flux and underfill encapsulant may be used in high humidity and temperature environments where dwell time between material dispense and chip placement is critical.

Kester Solder Co.
Des Plaines, IL 60018
Aug 06, 2003 SE-CURE® 9110 series consists of single-component materials that perform as epoxy-based flux and underfill encapsulants. Series uses compression-flow technique and enables concurrent processing of typical surface-mount components with flip chips in single reflow profile. Resin system provides eutectic and lead-free assembly solution in one material that offers protection from mechanical shock.

Plastomer Products Division
Newtown, PA 18940 1803
Jul 23, 2003 PLASTOLONâ„¢ Tapes provide insulation in wire and cable wrapping applications. They offer heat resistance, low smoke characteristics, and allow for uniform wall thickness. PLASTOLONâ„¢ Fibers are suitable for industrial woven fabrics, sewing thread, and self-lubricating bearings. In awning and marine applications, UV-resistant properties maintain seam strength. Chemically inert fibers withstand caustic compounds in wet and dry filtration applications.

Sherwin-Williams Co.
Cleveland, OH 44115
Jul 22, 2003 ARMORSEAL® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable for patching concrete, epoxy mortar systems, and urethane cement flooring systems.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 14, 2003 Ceramacastâ„¢ 576N large grain, alumina-filled, ceramic compound features temperature resistance to 3000°F, dielectric strength of 150 V/Mil, compressive strength of 10,200 psi, and moisture and chemical resistance. Product is supplied in powder form and mixed in ratio of 100 parts powder to 12-14 parts water. It is dispensed through pressurized dispensing equipment and sets in 16 hr at room temperature, or can be cured more rapidly at 200°F in 1-2 hr.

Master Bond, Inc.
Hackensack, NJ 07601
Jul 11, 2003 Master Bond Polymer System Supreme 10HTFL one component, flexible, epoxy resin based adhesive/sealant cures to flexible thermoset polymer at temperatures of 250–300°F and above and does not require refrigeration for extended storage before use. It adheres to metallic and non-metallic substrates and exhibits tensile lap shear strengths of more than 2,000 psi and T-peels in excess of 60 pli. Product is resistant to thermal and mechanical shock and vibration and chemicals.

TruSeal Technologies Inc.
Beachwood, OH 44122
Jul 10, 2003 Suited for hand gunning applications, Edge Thermâ„¢ THM 3000 consists of one-component, 100% solids sealant system designed for edge sealing insulating glass (IG) units. Product does not require mixing, produces minimal waste, and adheres to glass and metal substrates. Available in black and gray, product meets/exceeds requirements of ASTM E773/774 and CAN/CGSB-12.8. Product is available in 5 gal pails and 55 gal steel drums.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 01, 2003 Loctite® Thread Treatment Sticks, suited for industrial maintenance programs, consist of threadlocking, thread sealing, and anti-seize products. Portable products include Loctite® 248 medium-strength, blue threadlocker; Loctite® 268 high-strength, red threadlocker; Loctite® 561 PST® pipe sealant with PTFE; Loctite® C5-A® copper-based anti-seize; and Loctite® Silver Grade anti-seize. Sticks deliver performance characteristics of liquids, but do not leak or drip.

Jaco Mfg. Inc.
Atkins, VA 24311
Jun 23, 2003 JACO Fire and Draft Sealerâ„¢ is Classified by UL in accordance with ASTM-E136 for meeting non-combustible building material requirements. Product also acts as acoustical sealant, minimizing room to room and exterior noise. Zero Flame Spread/Zero Smoke Developed credited product guns from quart and 10.5 fl oz tubes. Water-based product can be tooled before curing and cleans up with water. After full cure, product may be sanded and painted.