Plastics Sealants

Adhesives & Sealants

Polyurethane Foam Sealant suits fireblocking applications.

Dec 04, 2014

Formulated for draft, smoke, and fireblocking applications in single family residential construction, Flame Tech FB is recognized by UL as alternative fireblocking material and colored orange to facilitate inspection. Closed cell insulating foam sealant expands up to 3 times original bead size to seal off gaps and voids around wires, pipes, ducts, and similar openings. Tack-free in as little as... Read More

Adhesives & Sealants, Fluid & Gas Flow Equipment, Materials & Material Processing

Molecular Material Changes Help Freudenberg-NOK Sealing Technologies Simrit Address Hydraulic Challenges

Mar 07, 2014

New polyurethane will be showcased at company's IFPE booth (#81330) LAS VEGAS – Amid the giant earthmoving machinery and massive hydraulic components on display at 2014 Fluid Power, Power Transmission, Motion Control Exposition (IFPE) and CONEXPO-CON/AGG in Las Vegas, is a new break-through technology that relies upon molecular innovation. Freudenberg-NOK Sealing Technologies Simrit will... Read More

Adhesives & Sealants, Material Handling & Storage, Materials & Material Processing

Saint-Gobain's CarboTherm(TM) Boron Nitride Fillers for Thermally Conductive, Dielectric Polymers on Display at Compounding World Forum 2013

Dec 03, 2013

Amherst, NY – Saint-Gobain Ceramic Materials, a pioneer in advanced material solutions, announced today that its range of CarboTherm™ boron nitride thermal management fillers will be on display at the upcoming Compounding World Forum 2013, December 10-11, Booth #2, Hilton City Avenue, Philadelphia. CarboTherm Boron Nitride fillers enable manufacturing of thermally conductive, dielectric... Read More

Adhesives & Sealants, Green & Clean, Materials & Material Processing, Paints & Coatings, Services

Polyurethane Sealant adds glossy, protective finish to metal.

May 06, 2013

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can be... Read More

Adhesives & Sealants

Polyurethane Sealant/Adhesive leverages i-Cure technology.

Mar 14, 2013

Weather-resistant Sikaflex®-295i UV features i-Cure® (intelligent curing) technology, which is chemical base for cross linking technology for polyurethane sealants and adhesives. Developed for use in bonding applications for polycarbonate and acrylic (PMMA) windows, this single-component polyurethane adhesive and sealant does not include any added solvents and has minimized VOC chemical... Read More

Adhesives & Sealants, Machinery & Machining Tools, Packaging Products & Equipment

Horizontal Conveyorized Sealer operates at up to 100 fpm.

Feb 02, 2011

Incorporating speed control and digital temperature controls, USDA-approved HCBS rotary band sealer offers odorless and smokeless sealing with ¼ in. secure final seal and trim. Dual heating sections and dual cooling sections ensure secure seal, while trim after seal system and vacuum trim accumulation system ensure clean, straight trim directly at seal edge. Heavy-duty, chrome-plated sealing... Read More

Adhesives & Sealants, Construction Equipment and Supplies

Polyurethane Sealant seals expansion and control joints.

Jan 28, 2010

Suited for vertical and horizontal construction applications, 2-component Chem-Calk® 505 seals expansion and control joints in precast concrete construction and metal curtain walls, as well as perimeters of door and window frames and other building components. Non-sag, architectural-grade formulation is solvent-free and meets requirements of ASTM C920, Class 25, Use T, and U.S. Green Building... Read More

Adhesives & Sealants

Radiopaque Filler meets needs of medical device industry.

Oct 06, 2009

Added to polymers to make catheters and other medical devices visible under fluoroscopy or x-ray imaging, Foster Bismuth Subcarbonate delivers performance at extrusion step of supply chain that helps improve yields and achieve thinner wall thicknesses. Particle morphology and dispersion characteristics optimize stability in extrusion process, while other properties promote smooth surface. Read More

Adhesives & Sealants

Bayer MaterialScience LLC to Highlight Latest Innovations in Fast-Setting Polyurea Sealants

Sep 01, 2009

Company expert to speak at upcoming Thermoset Resin Formulators Association's annual meeting in September Pittsburgh, August 26, 2009 - Bayer MaterialScience LLC has developed new fast-setting polyurea sealants which feature qualities such as improved UV stability and superior physical properties demanded in high productivity joint filling applications. Such qualities are particularly important... Read More

Adhesives & Sealants, Green & Clean, Materials & Material Processing

Reinforcing Agent broadens applications for polypropylene.

Aug 14, 2009

Designed to meet needs of automotive and appliance industries, Hyperform HPR-803 replaces high loadings of heavy mineral fillers, such as talc, while delivering balance of stiffness and impact strength. Product also offers high heat deflection temperatures and comparable surface finish to talc-filled compounds that cannot be achieved with chopped glass fiber reinforcement. Read More

Adhesives & Sealants, Construction Equipment and Supplies

Polyurethane Foam Sealant comes in can-inside-a-can package.

Feb 26, 2009

Designed for plugging and sealing applications to quickly stop flowing water, Todol Duo-Fill 400 Two-Part Urethane Foam Sealant mixes directly in actuator head of 9 in. long dispensing tube, which permits visual quality control. It provides chemical cure in one minute, unaffected by weather, and adheres well to most construction materials and offers multiple starts and closures. Supplied with 15... Read More

Adhesives & Sealants

Polyurea Elastomer Joint Sealer seals concrete substrates.

Feb 25, 2009

With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130°F, and becomes ready trimming flush within 20 min. Non-brittle product allows floor to move, and prevents contaminants from... Read More

Adhesives & Sealants, Packaging Products & Equipment

PAC Machinery Group has a "Blast" with Environmentally Sensitive Company

Aug 19, 2008

BlastBag's innovative waste containment bag sealed by PMG's Vertrod Sealer helps to protect the environment SAN RAFAEL, Calif. - With a strong focus on developing a product that protects the environment, BlastBag turned to PAC Machinery Group's Vertrod for a powerful heat sealing machine that would aid in the creation of their polyethelene bags. Vertrod's 96" sealer has helped to get the... Read More

Adhesives & Sealants, Construction Equipment and Supplies, Materials & Material Processing

Joint Sealant suits interior and exterior concrete floors.

Mar 18, 2008

Intended for applications requiring high elongation, CHEMTHANE 1350 aliphatic polyurethane concrete joint-filling compound withstands moisture, mildly acidic environments, and mildly alkaline environments. Two-component, zero-VOC product is corrosion-resistant, UV stable, and will protect against freeze thaw dynamics. Possible applications include aircraft hangars, factories, retail stores, and... Read More

Adhesives & Sealants

Polyurethane Sealant bonds to most building materials.

Nov 28, 2007

White Lightning® Polyurethane Sealant is mildew- and rust-resistant and withstands up to 50% joint movement. It is suited for interior and exterior projects and does not require mixing. Available in smooth and textured finishes, CARB-compliant sealant meets requirements of TT-S-00230 C (Type II) Class A, Non-sag, One-component and ASTM C-920 Type S, Grade NS, Class 25, Use-NT, Use-A, Use-M,... Read More

Adhesives & Sealants

Foam Sealant has wide operating temperature range.

Jan 04, 2007

Formulated for low-humidity conditions, Handi-Foam® Extreme cures at temperatures from as low as -20°C to seal, fill, bond, and stop air infiltration. Closed-cell polyurethane foam sealant also helps prevent moisture infiltration, reducing water damage and mold problems. This is particularly of use in areas where freeze/thaw cycles are common. Formula promotes low-temperature flow... Read More

Adhesives & Sealants

Adhesive and Sealants suit commercial applications.

Jun 11, 2004

QUIKRETE® Polyurethane Self-Leveling Sealant is non-staining and has virtually no shrinkage. Permanently flexible, polymeric, multi-purpose sealant is suited for horizontal joints and cracks. Offering abrasion and tear resistance, QUIKRETE® Polyurethane Non-Sag Sealant is suited for sealing vertical and overhead joints. QUIKRETE® Polyurethane Construction Adhesive is a fast-cure,... Read More

Adhesives & Sealants

Adhesive/Sealant suits transportation industry applications.

Apr 16, 2004

Bostik® Liquid Rivet 1152 FS, with 300 psi tensile strength, is a one-component, moisture-curing polyurethane formulation that can eliminate need for mechanical fasteners. With minimal VOC and low HAP content, product is compliant with CARB and SCAQMD California air quality emissions standards. It is tack-free in 30-45 min and fully cures in 24 hr. Recommended for overhead and vertical... Read More

Adhesives & Sealants

One-Component Sealant offers no slump, non-sag properties.

Feb 10, 2004

Bostik® 2175 FS environmentally-sound, 100% solids sealant meets demands of transportation industry. Based on silyl polyurethane sealant hybrid polymer technology, sealant is suited for overhead and vertical seam-sealing and gap-filling applications. Non-yellowing, paint-compatible formula adheres to aluminum, wood, and FRP. It is free of xylene, acetone, MEK, and similar solvents. At 70°F,... Read More