Jet-Lube, Inc.
Houston, TX 77028 5811
Jun 21, 2005 EZ-TURN® valve sealants, EZY-PAK® injection packing, and EZY-OPEN® penetrants meet or exceed requirements for applications from geothermal wellheads to chemical processing. Peanut butter type body fillers and synthetic varieties are suited for expanding and slab gate valves. EZ-TURN® sealants are suited for ball and tapered and cylindrical plug valves. Available in gel or liquid, EZY-OPEN™ is formulated as flush to penetrate and scale rust and oxidized valve fillers and lubricants.

Cortec Corp.
St. Paul, MN 55110
Jun 15, 2005 VpCI™ 374 Waterborne Metal Primer is formulated as fast drying, thixotropic coating with low viscosity that resists sagging. Built-in VpCI™ Anti-Corrosion System provides protection against corrosion, sunlight, and weather for carbon steel, cast iron, stainless steel, and aluminum. Designed for production base coating using conventional spray or airless spray, product can also be applied by brush or roller for touch-up and field use.

Acoustical Solutions, Inc.
Richmond, VA 23228
Jun 14, 2005 Classified for common firestop applications up to 3 hours, SSP Firestop Putty is fully tested to requirements of ASTM E814 and to time/temperature requirements of ASTM E119. Non-hardening, reusable material will not crack over time and is unaffected by humidity, condensation, and water. No drying or curing is required. SSP Firestop Putty is suited for metallic conduits, and telephone, data, or electrical power cable penetrations.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2005 Flexible, optically clear UV19 cures upon exposure to UV light at ambient temperatures. Compound is 100% reactive, does not contain any volatiles, and offers abrasion resistance and heat stability. With tensile strength in excess of 800 psi and viscosity of less than 300 cps at 75°F, compound is suited for laminating, sealing, and bonding to substrates with different thermal expansion coefficients.

Dow Corning Corp.
Midland, MI 48686 0994
May 04, 2005 Dow Corning® 111 heavy-consistency, dimethyl silicone compound maintains serviceable consistency from -70 to +400°F. Acceptable as release agent under FDA 21 CFR 175.300, it carries NSF 51 and NSF 61 approvals. Product can be used as lubricant for rubber and plastic O-rings, water softener and faucet valves, and electronic and ignition systems. It may also be used as sealant in transformer gaskets, equipment enclosures, and equipment subject to harsh environments.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 22, 2005 Single-part, high-temperature Pyro-Putty™ 1500 is used as sealant and gasketing compound in primary metal, foundry, and smelting industries for service conditions to 2,300°F. Non-toxic product will not shrink or crack on hot molds, and will not affect metallurgy of molten metals. It can be applied to tools before assembly, spot applied to bad joints after assembly, or used to seal vertical mold cracks. Product density is 11 lb/gal.

TruSeal Technologies Inc.
Beachwood, OH 44122
Mar 17, 2005 Usable in single- or dual-seal constructions, DecoSeal offers all-in-one sealant and spacer system for decorative glass used in windows and doors. Warm edge spacer system wraps around perimeter of decorative panel and is then placed between 2 additional lites for efficient insulated glass unit. Benefits include low moisture vapor transmission rate, concentrated desiccant layer, and low profile that accommodates secondary sealing or structural reinforcement in large lites.

Dever Enterprises LLC
Willoughby, OH 44096
Mar 17, 2005 Water-based All-Shield® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali. Sealer is available in 1- or 5-gal container.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 16, 2005 Optically clear, UV-curable UV15X-6 polymer system adheres to various substrates, including plastics and elastomers. Suited for medical device assemblies, single-component urethane formulation is 100% reactive, does not contain any volatiles, and also acts as electrical insulator. Cure is not affected by air or moisture, and cured material exhibits abrasion resistance. Bonds resist exposure to water and other solvents.

Dow Corning Corp.
Midland, MI 48686 0994
Mar 02, 2005 Optical Coupling Gel, OE-4000 consists of 2-part, high-purity, transparent silicone gel used for refractive index matching for silica-to-fiber and other optical junctions. One-part transparent silicone elastomer, OE-4100 provides refractive index shifting potential for planar silica-on-silicon optical components. Two-part Photonic-Grade Encapsulant OE-4200 consists of soft silicone elastomer for protecting semiconductor lasers, photonic, and electronic components.

Precision Brand Products, Inc.
Downers Grove, IL 60515 4054
Feb 01, 2005 Precision Brand® Tool Black® Gel blackener blackens large, vertical, or intricate areas of steel surfaces. Dripless formula achieves uniform black cosmetic finish on most ferrous metals up to RC50. It suits prototype work, auto repair and restoration, arts and crafts, OEM finishing, decorative hardware, and general MRO toolroom applications.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Feb 01, 2005 QuickStix(TM) 534(TM) Hi-Tack Gasket Dressing allows cut gaskets to be positioned and held in place while mating surfaces are aligned for assembly. Product cures at room temperature. Oil resistant QuickStix(TM) 548(TM) Gasket Eliminator® Flange Sealant prevents fluid or gas leaks on rigid iron, steel, and aluminum flanges. QuickStix(TM) 668(TM) Retaining Compound bonds non-threaded cylindrical assemblies and is formulated for high temperature applications up to 450°F.

Master Bond, Inc.
Hackensack, NJ 07601
Jan 31, 2005 Cured at room or elevated temperatures, 2-component EP21TDCHT-1 has temperature range serviceability of -100 to +400°F. Compound serves as electrical insulator with volume resistivity of 10¹⁴ ohm-cm. Epoxy adhesive/sealant is resistant to vibration, impact, and thermal shock as well as exposure to water, oils, and organic solvents. It has 70 Shore D hardness, 3,000+ psi tensile strength, and 175,000 tensile modulus.

TAH Industries, Inc.
Robbinsville, NJ 08691 1603
Jan 21, 2005 Universal 2-component adhesive cartridge fits in standard caulk gun and is offered in 2:1 ratio pack. Cartridge stores one component of adhesive in front of the other and both are extruded through cartridge outlet into static mixer simultaneously. Unit maintains accurate volumetric ratio and eliminates bulging or expansion of cartridge. The 2:1 ratio contains 177 ml of usable material.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jan 07, 2005 Hysol 3323, 3327, and 3329 are dam-and-fill products for encapsulation of wire-bonded dies used in Smart Card ICs. Used to form dam, high-viscosity Hysol 3323 has thixotropic nature and glass transition temperature (Tg) of 155°C. Hysol 3327 and 3329 are low-viscosity materials used for fill process. Coefficient of thermal expansion is 45 ppm below Tg and 130 ppm above Tg. Curing time enables max of 10,000 UPH, with no post-cure requirement.

Acoustical Solutions, Inc.
Richmond, VA 23228
Jan 06, 2005 Sound Sealant achieves and maintains specific STC (Sound Transmission Class) value of wall partition systems. Non-flammable, latex-base product is permanently flexible and adheres to wood or metal studs, concrete, gypsum board, AudioSeal Sound Barrier, and other building substrates. Formulation is non-drying, non-hardening, non-staining, and non-migrating. It comes in 29 oz cartridge that covers ~40 linear feet with 3/8 in. bead.

Master Bond, Inc.
Hackensack, NJ 07601
Dec 09, 2004 Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and plastics. Operating temperature range is -60 to +350°F.

Dow Corning Corp.
Midland, MI 48686 0994
Nov 18, 2004 Combined with pre-qualified, turnkey dispensing process, DOW CORNING® SE 4451 is designed to meet heat-management needs of electronic power devices. It exhibits thermal conductivity of 3W/mk @ 25°C and viscosity of 32,000 cps, which facilitate dispense and cure times.

NYLOK Corp.
Macomb, MI 48042 4007
Nov 01, 2004 Permanently fused on bearing surface of fastener, NYSEAL® self-sealing coating compresses slightly and fills void under bearing surface of head and countersink or bore. It covers 2–3 thread pitches down shank and requires no additional curing or heating after installation. NYSEAL prevents galvanic corrosion between dissimilar materials and is suited for sealing applications involving hydraulic fluids, oil, gasoline, petroleum fluids, water, and gaseous vapors.

Cotronics Corp.
Brooklyn, NY 11232
Oct 18, 2004 Applied by caulking cartridge, 7030 sealer forms gas tight seals with no objectionable odors or harmful fibers. Free flowing formulations are available for rapid or automatic dispensing applications. Room temperature-cure product bonds to metals, ceramics, door gaskets, tadpole gaskets, and ceramic cloths with no special surface treatment required. Corrosion and erosion resistant coatings are formed after a quick post cure at 600°F.