Master Bond, Inc.
Hackensack, NJ 07601
Jun 12, 2006 One component, heat curing epoxy adhesive/sealant EP17 cures at temperatures from 300-350°F for 60-90 minutes. Flowable paste has 8,700 psi tensile strength, 387,000 psi tensile modulus, Shore D hardness greater than 90, and compressive strength greater than 13,000 psi. MIL-MMM-A-132 compliant, 100% reactive compound is resistant to chemicals, including fuels and acids, and bonds to metals, glass, ceramics, vulcanized rubbers, and plastics.

ChemMasters, Inc.
Madison, OH 44057
Jun 06, 2006 VOC-compliant in areas affected by Ozone Transport Commission (OTC) regulations, solvent-based A team products cannot freeze, will not settle out, and are not susceptible to bacteria growth. Products included in series are styrenated acrylic sealer; non-yellowing acrylic cure and seal; and high-gloss, non-yellowing sealer. Also included, Silencure-A offers long-term silane protection, while Crystal Clear-A delivers long-term gloss and protection.

CS Hyde Company
Lake Villa, IL 60046
May 23, 2006 Suited for color code specific applications, processes, or products, Colored PTFE (Teflon®) Films and PSA Tapes (with adhesive) are available in blue, green, or yellow. Products feature tensile strength of 20-30 lb/in. and dielectric strength of 8,000-12,000 V. Films and tapes operate at 50-55°F and 45°F, respectively, and suit high temperature applications.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 19, 2006 Used on porous ceramic materials and to seal high-temp motor windings, single part Aremco-Seal(TM) 4030 is water-dispersed and non-flammable. VOC-free product dries at room temperature within 1 hr and cures fully in 30-60 min @ 450°F. Solids content is 40%, and theoretical coverage rate at 1 mil is 535 ft²/gal. Formulated with viscosity of 600-1,200 cps, environmentally safe sealant may be applied by brush, roller, or spray equipment.

Cotronics Corp.
Brooklyn, NY 11232
Mar 17, 2006 Packaged in dispensing cartridges, 450°F Instant Metal 7056AL forms solid metallic aluminum layer that adheres to smooth, rough, or porous surfaces as well as most plastics, metals, ceramics, glass, and wood. It cures in 4-8 min at room temperature without objectionable sulfur odors. Once cured, metallic composite is machinable with standard tools and can also be tapped, drilled, and threaded.

Cliplight Manufacturing Company
Toronto M3J2J1  Canada
Jan 17, 2006 Injected into moisture-free system, Super Seal particle-free formula flows freely without affecting valve cores, driers, compressors, or other components. Once product and refrigerant leak out hole 300 microns or smaller, chemical reaction crystallizes it around hole during exposure to atmospheric moisture and then forms seal. Versions are available for 5 ton systems and larger, residential systems from 1½-5 tons, and small systems from 230-18,000 BTU/hr or max 1½ tons.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Dec 15, 2005 Featuring tack-free edges, Performance Plus Duct Tape 8979 removes cleanly from opaque surfaces for up to 6 months, even after exposure to sunlight and temperature extremes. Used indoors and outdoors, product can stay on job without deterioration for up to one year. Available in various widths and colors, it meets UL 723, HUD, and BOCA codes. Performance Plus Duct Tape Nuclear Grade 8979N, also available, is certified to meet low halogen and sulfur levels.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Dec 09, 2005 Hysol® FP4451TD(TM) and FP4800(TM) meet stringent JEDEC level testing requirements and enable wirebonded cavity-down SuperBGA® and Viper(TM) BGA packages. Suited for package level applications, Hysol FP4451TD offers aspect ratio of 0.70 height-to-width and enables dam heights greater than 1 mm. Self-leveling, liquid encapsulant, Hysol FP4800 withstands solder temperatures to 260°C after preconditioning, and penetrates fine-pitch wires and deep cavities without entrapping voids.

Aremco Products, Inc.
Valley Cottage, NY 10989
Dec 08, 2005 Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty(TM) 950 is used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds up to 950°F. Product is resistant to chemical and steam attack, high pressure and vacuum atmospheres, and mechanical vibration and joint movement. Offered in 11 oz caulk gun cartridge, sealant cures in service, or before service by heating joint without pressure.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 29, 2005 Used for bonding and sealing, UV15X-5 single-component urethane elastomer withstands thermal cycling and mechanical shock. Its formulation exhibits abrasion resistance and forms chemical-resistant bonds between similar and dissimilar substrates. This 100% reactive product, which does not contain any solvents or volatiles, cures in thicknesses greater than 1/8 in. at room temperature upon exposure to UV light. Tensile strength is 1,800 psi, and Shore D hardness is 35-40.

GE Advanced Materials
Wilton, CT 06897
Nov 11, 2005 Offering high refractive indexes from 1.4 to over 1.5, InvisiSil Encapsulants offer adhesion to range of case and electrode materials including ceramics, polyamides, and silver and gold electrodes. They provide stability under thermal stress and UV light, resisting yellowing and delamination from substrate. InvisiSil Lens Materials are high hardness silicone materials that can be liquid injection molded and also provide resistance to heat and UV light.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 11, 2005 With 1:1 mix ratio by weight or volume, low-viscosity EP37-3FLF cures at room temperature and bonds to metal, glass, ceramic, rubber, and plastic substrates. Bonds offer resistance to impact, shock, and thermal cycling. Also usable as potting and encapsulation compound, product has service operating temperature range of -80 to +250°F, Shore D hardness of 30, and tensile strength of 4,000 psi at 75°F. Peak exotherm for 200 gm mass is 40°C.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Sep 20, 2005 Designed for curtainwall and metal cladding systems, as well as concrete, brick, and stone structures, pre-compressed COLORSEAL combines factory-applied and cured silicone bellows with impregnated expanded foam sealant backing. Silicone remains pliant, UV stable, and watertight over time and temperature. R-value of 3.28/in. of depth imparts thermal insulation at structural join-gaps, while non-invasive anchoring eliminates need to drill or screw into sensitive substrates.

Devcon
Danvers, MA 01923
Aug 30, 2005 Non-shrinking castable liquid, Cable Cast FR urethane encapsulates, insulates, and provides strain relief for electrical connectors and cables. Because it forms flexible jacket with abrasion, tear, and puncture resistance, it can also repair power cable jackets and insulation. Intended for potting aerospace inserts, clear-drying 5 Minute® Epoxy FR adhesive/encapsulant paste fills gaps and bonds rigid substrates such as metals, glass, ceramics, concrete, and wood.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Aug 09, 2005 Non-yellowing, polymer-based DECRA-SEAL™ W/B is formulated to seal and protect decorative colored concrete by producing hard, flexible, clear film. Used on any interior/exterior concrete surface, product provides finish that is resistant to chemicals, oil, grease, de-icing salts, and abrasion. It meets max VOC content limits of 200 g/L for sealers as well as 400 g/L VOC max required by U.S. EPA Architectural Coatings Rule.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 22, 2005 One-part Loctite® Nuva-Sil® Silicones cure tack-free in seconds to depth of 2 in. upon exposure to UV or high-power visible light. Translucent in appearance, products offer weather, temperature, and moisture resistance, and will not degrade or yellow on long-term exposure to light. All offer built-in fluorescence detection system that allows automatic quality inspection. These non-conductive silicones are suited for gasketing, sealing, and encapsulating.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 14, 2005 Pyro-Putty® 1000 sealant and metal repair compound is 2-part, powder and liquid system that operates to 1,400°F. Dispensed into place in cross-sections up to ½ in. thick, water-based, ceramic- and aluminum-filled paste sets at room temperature in 16–24 hr. It can be cured in-situ or by heating for 1–2 hr @ 160°F. Containing no asbestos or VOCs, environmentally compliant compound is resistant to thermal shock, corrosive chemicals, and solvents.

Imagineering Finishing Technologies
South Bend, IN 46619
Jul 12, 2005 Lead- and Cadmium-Free Electroless Nickel surface finish is electroless nickel process yielding mirror bright nickel phosphorus alloy that offers corrosion resistance, uniformity of coverage, and repair and salvage capabilities. Trivalent Chromate Conversion Coating produces protective coating on pure aluminum, zinc, and anodic aluminum. It minimizes corrosion, provides bonding surface for paints, and appears faint blue to tan and iridescent.

CS Hyde Company
Lake Villa, IL 60046
Jun 24, 2005 Fat Teflon® Tape is conformable, non-reinforced skived tape with pressure sensitive adhesive on one side. Product is non-porous, self-lubricating, chemical and moisture resistant, and resistant to extreme temperatures from -100 to 400°F. Offered in 5 or 36 yd rolls, tape comes in widths from ½–12 in. and is available with High Temp Silicone or Acrylic Adhesive. Typical uses include insulating, masking, anti-stick, release, and friction reduction.

Cotronics Corp.
Brooklyn, NY 11232
Jun 22, 2005 Made from high purity alumina oxide ceramics and ceramic binders, Thermeez 7020 cures at room temperature for resistance to heat, electricity, molten metals, most chemicals, and oxidation. Product is dispensed with one push from dispenser tube or 11 oz caulking cartridge. Providing equivalent of plastic wood, Thermeez 7020 air-dries to hard ceramic body delivering instant repairs to ceramics, bricks, mortar, burner blocks, insulation furnaces, and thermocouples.