Dever Enterprises LLC    Willoughby, OH 44096
Mar 17, 2005 Water-based All-Shield® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali. Sealer is available in 1- or 5-gal container.

Master Bond, Inc.    Hackensack, NJ 07601
Mar 16, 2005 Optically clear, UV-curable UV15X-6 polymer system adheres to various substrates, including plastics and elastomers. Suited for medical device assemblies, single-component urethane formulation is 100% reactive, does not contain any volatiles, and also acts as electrical insulator. Cure is not affected by air or moisture, and cured material exhibits abrasion resistance. Bonds resist exposure to water and other solvents.

Dow Corning Corp.    Midland, MI 48686 0994
Mar 02, 2005 Optical Coupling Gel, OE-4000 consists of 2-part, high-purity, transparent silicone gel used for refractive index matching for silica-to-fiber and other optical junctions. One-part transparent silicone elastomer, OE-4100 provides refractive index shifting potential for planar silica-on-silicon optical components. Two-part Photonic-Grade Encapsulant OE-4200 consists of soft silicone elastomer for protecting semiconductor lasers, photonic, and electronic components.

Precision Brand Products, Inc.    Downers Grove, IL 60515 4054
Feb 01, 2005 Precision Brand® Tool Black® Gel blackener blackens large, vertical, or intricate areas of steel surfaces. Dripless formula achieves uniform black cosmetic finish on most ferrous metals up to RC50. It suits prototype work, auto repair and restoration, arts and crafts, OEM finishing, decorative hardware, and general MRO toolroom applications.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Feb 01, 2005 QuickStix(TM) 534(TM) Hi-Tack Gasket Dressing allows cut gaskets to be positioned and held in place while mating surfaces are aligned for assembly. Product cures at room temperature. Oil resistant QuickStix(TM) 548(TM) Gasket Eliminator® Flange Sealant prevents fluid or gas leaks on rigid iron, steel, and aluminum flanges. QuickStix(TM) 668(TM) Retaining Compound bonds non-threaded cylindrical assemblies and is formulated for high temperature applications up to 450°F.

Master Bond, Inc.    Hackensack, NJ 07601
Jan 31, 2005 Cured at room or elevated temperatures, 2-component EP21TDCHT-1 has temperature range serviceability of -100 to +400°F. Compound serves as electrical insulator with volume resistivity of 10¹⁴ ohm-cm. Epoxy adhesive/sealant is resistant to vibration, impact, and thermal shock as well as exposure to water, oils, and organic solvents. It has 70 Shore D hardness, 3,000+ psi tensile strength, and 175,000 tensile modulus.

TAH Industries, Inc.    Robbinsville, NJ 08691 1603
Jan 21, 2005 Universal 2-component adhesive cartridge fits in standard caulk gun and is offered in 2:1 ratio pack. Cartridge stores one component of adhesive in front of the other and both are extruded through cartridge outlet into static mixer simultaneously. Unit maintains accurate volumetric ratio and eliminates bulging or expansion of cartridge. The 2:1 ratio contains 177 ml of usable material.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jan 07, 2005 Hysol 3323, 3327, and 3329 are dam-and-fill products for encapsulation of wire-bonded dies used in Smart Card ICs. Used to form dam, high-viscosity Hysol 3323 has thixotropic nature and glass transition temperature (Tg) of 155°C. Hysol 3327 and 3329 are low-viscosity materials used for fill process. Coefficient of thermal expansion is 45 ppm below Tg and 130 ppm above Tg. Curing time enables max of 10,000 UPH, with no post-cure requirement.

Acoustical Solutions, Inc.    Richmond, VA 23228
Jan 06, 2005 Sound Sealant achieves and maintains specific STC (Sound Transmission Class) value of wall partition systems. Non-flammable, latex-base product is permanently flexible and adheres to wood or metal studs, concrete, gypsum board, AudioSeal Sound Barrier, and other building substrates. Formulation is non-drying, non-hardening, non-staining, and non-migrating. It comes in 29 oz cartridge that covers ~40 linear feet with 3/8 in. bead.

Master Bond, Inc.    Hackensack, NJ 07601
Dec 09, 2004 Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and plastics. Operating temperature range is -60 to +350°F.

Dow Corning Corp.    Midland, MI 48686 0994
Nov 18, 2004 Combined with pre-qualified, turnkey dispensing process, DOW CORNING® SE 4451 is designed to meet heat-management needs of electronic power devices. It exhibits thermal conductivity of 3W/mk @ 25°C and viscosity of 32,000 cps, which facilitate dispense and cure times.

NYLOK Corp.    Macomb, MI 48042 4007
Nov 01, 2004 Permanently fused on bearing surface of fastener, NYSEAL® self-sealing coating compresses slightly and fills void under bearing surface of head and countersink or bore. It covers 2-3 thread pitches down shank and requires no additional curing or heating after installation. NYSEAL prevents galvanic corrosion between dissimilar materials and is suited for sealing applications involving hydraulic fluids, oil, gasoline, petroleum fluids, water, and gaseous vapors.

Cotronics Corp.    Brooklyn, NY 11232
Oct 18, 2004 Applied by caulking cartridge, 7030 sealer forms gas tight seals with no objectionable odors or harmful fibers. Free flowing formulations are available for rapid or automatic dispensing applications. Room temperature-cure product bonds to metals, ceramics, door gaskets, tadpole gaskets, and ceramic cloths with no special surface treatment required. Corrosion and erosion resistant coatings are formed after a quick post cure at 600°F.

Master Bond, Inc.    Hackensack, NJ 07601
Oct 04, 2004 Type EP34AN room temperature cure, 2-component epoxy adhesive/sealant, with thermal conductivity of 22–24 BTU/in/ft²/hr/°F, maintains physical properties after prolonged exposure to temperatures from 400–450°F. It exhibits dimensional stability and electrical insulation properties and can be applied without sagging or dripping. Able to bond to various substrates, 100% reactive epoxy has Shore D hardness of greater than 85 and tensile strength of 5,500 psi.

Berry Plastics Corp., Tapes & Coatings Division    Franklin, MA 02038
Sep 10, 2004 Suited for building trade, Polyken® Stucco 888 Enhanced Masking Material remains attached on jobsite for periods up to 30 days in temperatures to 150°F. Multi-purpose, polyethylene-coated, cloth duct tape withstands UV radiation from sunlight and employs natural, rubber-based adhesive that sticks to rough surfaces. Bright red in color, single-coated, self-wound tape has total thickness of 11.5 mils and tensile strength of 40 lb/in.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Aug 27, 2004 Medium-viscosity, UV- and moisture-curing Loctite® 5252 is designed for post-assembly use on electronic module enclosures. Based on polyether rubber technology, thixotropic sealant withstands temperatures from -40 to +125°C and offers controlled flow. It seals seams without seepage or dripping and allows users to tack material within seconds. Sealant-incorporated fluorescent dye enables online inspection for accurate, complete application.

Hernon Mfg., Inc.    Sanford, FL 32771
Aug 25, 2004 HPS(TM) 1000 and 1100 seal microscopic voids in leaking porous metals such as powdered-metal castings and sintered-metal parts through vacuum application process. Both feature resistance to degradation by hydrocarbon solvents, and lubricity that lowers tool wear. Surfactant-free products facilitate washing of impregnated parts and eliminate need for pretreatment of disposed waste rinse water.

Henkel Consumer Adhesives, Inc.    Avon, OH 44011-1355
Aug 20, 2004 Duck® Tape combines high sheer strength with adhesive power on both sides to create tool suited for temporary mounting, seaming, hanging, and repair applications. Do-it-yourselfers can temporarily hang posters and project instructions, secure outdoor drop cloths, and hold plastic sheeting in place. Duck® tape releases and tears from roll with little effort.

Master Bond, Inc.    Hackensack, NJ 07601
Aug 06, 2004 Dual-component EP42HT-2 epoxy adhesive, sealant, coating, and casting material withstands repeated sterilizations, including radiation, ethylene oxide, chemical sterilants, and steam. Featuring service operating temperature range of -60 to +450°F, product exhibits chemical resistance and Shore D hardness greater than 75. Properties include mixed viscosity of 3,500 cps and tensile strength greater than 12,000 psi. It is castable in thicknesses exceeding 2–3 in.

Master Bond, Inc.    Hackensack, NJ 07601
Jul 15, 2004 One-component, heat-curing, EP17 offers service operating range of -300 to +600°F and cures in 60–90 min at 300–350°F. Product bonds to metals, glass, ceramics, vulcanized rubbers, and plastics. Chemical-resistant EP17 has Shore D hardness greater than 90, compressive strength greater than 13,000 psi, and tensile strength of 8,700 psi. Flowable paste is 100% reactive, does not contain solvents, and can be applied on vertical surfaces without sagging.