TruSeal Technologies Inc.
Beachwood, OH 44122
Mar 15, 2004 Available in black, EdgeThermâ„¢ PIB-H1 gun grade, 100% solids sealant system is based on polyisobutylene (PIB) polymer formulated to impart reinforcement, resist degradation from UV light and oxidation, and provide low moisture permeability. It resists shearing and retains flexibility through its temperature range to compensate for thermal movement of IG units. Product adheres to glass and metal.

Permabond
Somerset, NJ 08873
Mar 08, 2004 PERMABOND® LH050 PURE Anaerobic Pipe Sealant fills up entire space between male and female metal components and instantly seals connection. Cured product typically exceeds burst rating of pipe and locks pipes, plugs, or fittings against vibration loosening. Single-component paste will seal even when direction in which pipe must face does not allow complete seating of threads. Disassembly of fittings for maintenance is still possible using normal tools.

Permabond
Somerset, NJ 08873
Mar 08, 2004 PERMABOND PURE Anaerobic Adhesive/Sealants are single component liquids that cure when in contact with metal parts and oxygen is excluded. They fill gaps between mated parts by curing to hard plastic and locking assembly in place. PERMABOND PURE Threadlocking Adhesives/Sealants cure to cross linked plastic with environmental and temperature resistance. Examples include medium-strength, medium-viscosity MM115 and very low viscosity ML186 threadlocker and sealant.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Medium-viscosity, anaerobic Permabond HM130 prevents loosening of threaded fasteners and is suited for automated assembly processes. Used for cylindrical parts, Permabond HM162 retaining compound fixtures in 2-5 min. GASKETMAKER® Permabond MH196, non-flammable flange sealant forms instant, low-to-moderate pressure-resistant, leak-free seal and allows for metal-to-metal contact. Thixotropic property prevents migration before and during cure.

Birchwood Laboratories, Inc.
Eden Prairie, MN 55344
Mar 02, 2004 DRI TOUCH® PLUS IRP3 penetrant and sealant works on impregnated and non-impregnated powdered metal parts, regardless of density or porosity of surface. Low viscosity liquid penetrates remaining porosity of powdered or sintered metals to displace moisture beneath surface. Once dry, it leaves semi-solid protective film that is absorbed by part itself. Protection levels range from 80–120 hr of salt spray or several hundred hr of humidity resistance.

Devcon
Danvers, MA 01923
Feb 26, 2004 Flex Bondâ„¢ two-component adhesive bonds flexible piping made of PVC, ABS, and other plastics. Once methacrylate polymer has been applied to 1 of 2 surfaces to be joined, activator can be sprayed on top of polymer or onto other surface. Working time is 3–4 min following activation. Flex Bond requires no mixing, attains functional cure in 1 hr at room temperature, and withstands temperatures to 200°F. It fills gaps up to 25 mils and has tensile elongation of 16%.

Dymax Corp.
Torrington, CT 06790
Feb 19, 2004 Intended for thermoformed plastic clamshell and tube packaging, Light-Weld® 3081 and 3082 Sealants cure upon exposure to UV light in seconds, allowing production line speeds up to 30 fpm. Products create crystal clear bonds and eliminate marking or discoloration that can occur with heat sealing RF or sonic welding. Solvent- and ODC-free, each adhesive comes in standard and thick viscosity grades to suit various dispensing and flow requirements.

TruSeal Technologies Inc.
Beachwood, OH 44122
Feb 11, 2004 PURFECT GLAZEâ„¢ warm applied adhesive glazing sealants bond glass to window sashes or frames. Sealant technology utilizes polyurethane reactive hot-melt adhesives and allows users to wrap windows within 5 min. Once glass is bedded, products provide immediate handling strength. Sealants are available in 3 grades: PURFECT GLAZE G for general insulating glass (IG) applications, SA for special IG applications, and H for high-strength IG applications.

Scapa North America
Windsor, CT 06095
Feb 11, 2004 Scapa 440 Series tape, suited for taping, bundling, and sealing applications, is made of polyethylene coated cloth single-coated with high-tack, natural rubber adhesive. Product does not exhibit edge ooze, can be torn by hand, will not twist or curl during application, and adheres to poly films and sheeting. Scapa 441 is 7.0 mil thick, Scapa 442 is 8.5 mil thick, and Scapa 448 is 11.0 mil thick.

Bostik
Middleton, MA 01949-2128
Feb 10, 2004 Bostik® 2175 FS environmentally-sound, 100% solids sealant meets demands of transportation industry. Based on silyl polyurethane sealant hybrid polymer technology, sealant is suited for overhead and vertical seam-sealing and gap-filling applications. Non-yellowing, paint-compatible formula adheres to aluminum, wood, and FRP. It is free of xylene, acetone, MEK, and similar solvents. At 70°F, moisture-curing product is tack-free in 20–40 min and fully cures in 24–36 hr.

Cotronics Corp.
Brooklyn, NY 11232
Feb 04, 2004 Offered as alternative to anaerobic sealants, Resbond(TM) 507TS is non-corrosive; adheres to threads, studs, and pipes; and cures to form thermally stable and electrically insulating joints. Product prevents vibration loosening and leakage caused by shock and vibration in high-temperature applications. Preparation requires users to mix and apply, and product cures in 2-4 hr at room temperature. Material has no flammable solvents or harsh odors.

Mapei
Deerfield Beach, FL 33442
Jan 29, 2004 Mapelastic HPG prevents movement of moisture into sub-surfaces of structures that can cause swelling, wood rot, and leaks. Creamy fluid can be applied with trowel, brush, or roller to prevent transfer of cracks through membrane and into tile or stone above it. Membrane meets all requirements for VOC compliance and incorporates BioBlockâ„¢ antimicrobial protection, which inhibits mold and mildew growth.

Balzers, Inc.
Elgin, IL 60123
Jan 22, 2004 G6 BALINIT® wear-resistant, AlCrN-based coating is oxidation-resistant and exhibits stability even at thermal load extremes. Physical Vapor Deposition (PVD) coating is directed specifically toward applications that allow coating and re-coating of carbide and HSS tools.

Chemline Inc.
St. Louis, MO 63103
Jan 15, 2004 EURO-SEAL 7000 polyurethane encapsulant, suited for use on carved architectural EPS and polyurethane foam elements, provides protection from thermal expansion and UV degradation and strengthens mechanical impact resistance. Able to dry to touch within 10 sec, 2-component, spray-applied polyurethane coating forms hard, chemical-, moisture-, and fire-retardant encapsulation. It enables fabricators to coat foam parts in production-line fashion.

Tra-Con, Inc.
Bedford, MA 01730
Jan 12, 2004 Tra-Bond 813J01 offers thermal conductivity constant of 1.1 W/M/°K, making is suited for encapsulating heat generating devices such as transformers, thermistors or power sources, and pour-in-place heat sinks. Operating temperature is 260°C, but with Tg of -120°C, Tra-Bond 813J01 can deal with stress issues and mismatched CTEs. It can be cured at room temperature, or in only minutes at elevated temperatures. Working life is 100 min.

Cotronics Corp.
Brooklyn, NY 11232
Nov 26, 2003 Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite is rated to 2,000°F. All are applied by trowel without running, dripping, or sagging.

Tra-Con, Inc.
Bedford, MA 01730
Nov 19, 2003 Soft and flexible, Tra-Bond 927-1 is brown in color with viscosity of 40,000 cps. High volume resistivity and dissipation factor of 0.230 make it suited for applications requiring no electrical conductance. Registering 55 on Shore A scale for hardness, product offers impact resistance and is also resistant to aviation fuels and oils.

Gore, W. L., & Associates, Inc., Industrial Filtration Technologies
Elkton, MD 21921
Nov 17, 2003 GORE-TEX® creep-resistant, form-in-place gasketing material is made from GORE-TEX® expanded PTFE, which is impervious to most chemicals, suitable for use from -450 to +600°F, and able to withstand pressures to 3,000 psig. Tight-sealing product, suited for most types of sealing applications, is also suited for use in chemical processing plants.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 03, 2003 Ceramacoatâ„¢ 512N high-temperature adhesive and ceramic coating system is used in assembly of ceramic, metal, and plastic electrical components and as coating of high temperature structures requiring corrosion protection. Single part, water-based, silica-filled system offers volume resistivity of 10⁹ ohm-cm and dielectric strength of 250 V/mil at room temperature. Odorless product contains no VOCs, and no outgassing will occur upon cure or during operation.

Solar Compounds Corp.
Linden, NJ 07036
Sep 17, 2003 Solarite SI-200 Series Room Temperature Vulcanizing (RTV), 2-component, electrical potting and casting silicones are available in hardness ranges from 80A (semi-rigid) to 00 (gels). Gels are re-enterable and cure to elastic Shore 00 form with no surface residue. Products are UL-94V-0 approved, cure with high gloss, and produce void-free castings in potted electrical devices. Characteristics include non-corrosive cure, flame retardancy, and vibration resistance.