Tra-Con, Inc.
Bedford, MA 01730
Nov 26, 2002 TRA-BOND 526M04 two-part, low-viscosity epoxy adhesive provides versatility of fast heat cure and stands up to 85/85 testing. Product is suited for critical, high-temperature, fiber-optic applications that require lowest stress possible, including polar maintaining fiber work.

Tra-Con, Inc.
Bedford, MA 01730
Nov 15, 2002 TRA-CAST 9182A medium-viscosity electrical insulator is UL-94 V-O approved. Semi-rigid material adheres to electronic and aerospace-industry materials such as metal, glass, ceramic, industrial laminates, and plastics. It is suited for potting, laminating, transformer encapsulating, filament binding, and coil-embedding applications where stress relief matched with fire retardancy is required.

Electronic Materials, Inc.
Breckenridge, CO 80424 8817
Nov 12, 2002 OPTOCAST 3410 GEN 2 ultraviolet light and/or heat curable epoxy is suitable for opto-electronic assembly. It cures rapidly when exposed to UV light in 320-380 nm range with low shrinkage. Maximum ionic content is 10 ppm total Na+, K+, and Cl-. Epoxy is ideal for fixturing and aligning optical devices with less than 1 µ movement throughout its service life. Working life at room temperature is approximately 3 days.

Solar Compounds Corp.
Linden, NJ 07036
Nov 06, 2002 Rigid cure epoxy, EP-211FRHTC (Flame Retardant High Thermal Conductivity), offers thermal conductivity and flame retardancy. When cured at room temperature, it has service temperature of up to 130°C. When heat cured, epoxy withstands temperatures up to 200°C. Its viscosity provides penetration and void filling. Electrical potting and encapsulating epoxy reduces operating temperature of potted internal components.

Burke Industrial Coatings
Vancouver, WA 98682 2410
Nov 05, 2002 Steel Plus epoxies provide packaging and processing machinery with resistance to harsh CIP sanitation and corrosive chemicals, and are impervious to high-pressure washdown and other severe factory conditions. They have no odor and can be applied to steel, galvanized steel, tin, and aluminum. Epoxies are quick drying, resistant to alkalines and acids, and available in 1 or 5 gal sizes. They can be applied by brush, roller, air-atomized, air-less or hot spray.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 01, 2002 Type EP22 2-component epoxy adhesive features 1:1 mix ratio by weight or volume. It produces high strength bonds with adhesion to metals, particularly steel and aluminum. Bonds are resistant to thermal cycling and chemicals. Epoxy is readily machinable and can be employed over temperature range of -60 to 250°F. Shrinkage upon cure is low and dimensional stability is high. Cure can be accelerated by use of heat. Epoxy is available in pint, quart, gal, and 5-gal container kits.

Tra-Con, Inc.
Bedford, MA 01730
Oct 23, 2002 Two-part TRA-BOND 2170T is suitable for bonding nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and almost any thermoplastic substrate. It is thixotropic to allow for more control over flow. Epoxy can be used for automotive, medical, aerospace, photonic, and assembly applications.

Electronic Materials, Inc.
Breckenridge, CO 80424 8817
Oct 22, 2002 Silica-filled OPTOCAST 3421 single component adhesive is UV/heat cureable. It exhibits low shrinkage on cure (0.4%, linear) and is ionically clean (max ionic content rated at 15 ppm total Na + K+ Cl⁸). Result on cure is 85/85 (85°C/85% relative humidity) with 50°C DI water soak resistance. Epoxy has flexural and tensile strengths of 7,000 and 15,000 psi, respectively, and D Hardness rated at 91 (min).

Devcon
Danvers, MA 01923
Oct 10, 2002 High-Temp Moldmaker (C-1) heat-cured epoxy liquid maintains compressive strength to 36,500 psi at operating temperatures up to 500°F. It has pot life of 90 min and achieves functional cure in 24 hr. Aluminum Liquid (F-2) aluminum-filled epoxy has low viscosity that provides accurate reproduction of mold details on delicate or intricate parts. Cured molds withstand service temperatures up to 250°F. F-2 has pot life of 75 min, and achieves functional cure in 16 hr.

Milamar Coatings LLC / PolyMax
Oklahoma City, OK 73120
Oct 04, 2002 PolyMax DCS consists of high solids epoxy primer/sealer into which blend of vinyl chips is distributed to leave granite looking surface. Surface is sealed with chemical and UV resistant gloss lock coat and finish. PolyMax is non porous, has no grout joints and can be installed with smooth or textured finish. It can be made slip resistant for wet environments, and offers low maintenance, abrasion resistance, and resistance to most food and automotive liquids.

Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 02, 2002 Aremco-Bondâ„¢ 2150 ceramic-filled, vibration-resistant epoxy provides tensile shear strength of 2,350 psi and flexural strength of 11,800 psi. Chemical resistance to acids, alkalis, organic fluids, and salts is provided to operating temperature of 400°F. Black pigmented, 100% solids epoxy cures at room temperature within 24 hr or at 200°F in 30 min. Cured product is machinable and exhibits linear shrinkage of .004 in./in. and Shore-D hardness of 84.

Tra-Con, Inc.
Bedford, MA 01730
Sep 18, 2002 Clear, flexible TRA-BOND 3010 bonds to ceramics, glass, most metals, and many plastics. It exhibits near-zero shrinkage and is resistant to water, weather, gases and vapors, petroleum products, mild acids and alkalis, salt solutions, and other organic compounds. Compound is suitable for aerospace and electronics applications.

Tra-Con, Inc.
Bedford, MA 01730
Sep 17, 2002 Tra-Bond 2106T thixotropic epoxy is recommended for use in lower temperatures or wet industrial bonding applications that require fast cure. When fully cured, it provides electrical insulation and resistance to water, galvanic action, petroleum fuels, and many other chemicals. Epoxy develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, masonry, and other construction materials.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 19, 2002 With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10^-6 in./in. per °C. Linear shrinkage is rated at 0.0002 in./in. per °C, thermal conductivity is 6 BTU•in./ft²â€¢hr•°F, and service temperature ranges from -60 to +250°F. Able to bond to various metals, plastics, ceramics, and glass, EP30LTE-LO passes ASTM 595 for low outgassing. It suits applications requiring vacuum compatibility, sealant, or encapsulant.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Aug 14, 2002 No. 122-38(SD) single-component, silver-filled, electrically conductive adhesive is 100% solids and syringe dispensable. It offers fine pitch resolution when syringed dispensed, stencil printed, or screen-printed. Epoxy provides adhesion to gold-plated substrates, as well as tin/lead solder-terminated components. It features chemical resistance, thermal stability to 325°C, and useful temperature range from -55 to +230°C.

Fiber Optic Center, Inc.
New Bedford, MA 02740 6322
Jul 23, 2002 AngstromBond® AB9031 epoxy based system contains optical silica filler. Creamy paste can be dispensed through syringes or automated cartridges. It bonds to metals, ceramic, silicon, plastics, and glass. Product passes specifications including 1,000 hours in 85/85 environment. Product is suitable for optical bonding and sealing applications where alignment must be maintained during thermal cycling.

Permabond
Somerset, NJ 08873
Jul 09, 2002 Line includes structural acrylics, 1- and 2-part epoxies, UV curable, cyanoacrylates, and anaerobic adhesives. Permabond E04 (2-part epoxy) and 465 (UV curable) are both used for wire tang reinforcements. E32 (2-part epoxy), ESP310 (1-part, heat cured epoxy), 681 (2-part acrylic), 581 (1-part acrylic used with 534 activator), 671 (2-part acrylic), and 533 (1-part acrylic used with 534 activator) are all used for magnet bonding. End caps can be sealed with HH190 anaerobic adhesive.

Master Bond, Inc.
Hackensack, NJ 07601
Jul 03, 2002 Two-component EP75-1 has 100 to 15 mix ratio by weight. It cures at room temperature or more rapidly at elevated temperatures. Adhesive develops bonding strength of more than 2,000 psi tensile shear when measured and cured at 75°F. Volume resistivity of cured system is 50-100 ohm cm. Adhesive contains no solvents or diluents. It is suitable for metals, glass, ceramics, vulcanized rubber, and most plastics. Service operating temperature is -60 to +250°F.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 03, 2002 Fixmaster® Super Grout pourable, aggregate-filled epoxy withstands high torque loading and contains 100 percent solids. Non-shrinking and chemical/corrosion-resistant, it suits self-leveling applications under rails and sole plates. Once mixed, epoxy compound is red in color. Each 5-gallon kit covers 620 cubic inches. Typical applications include diesel or gas engines, generators, cone crushers, mine hoists, and gantry cranes.

Epoxies Etc.
Cranston, RI 02921-3407
Jun 24, 2002 Type 20-3650 electronic grade epoxy potting, casting, and encapsulating system exhibits excellent physical, thermal, and electrical insulation properties. Tensile strength is 11,000 psi and compressive strength is 15,500 psi. Compound is DOT non-hazardous, easy to mix, and will cure at room temperature or with mild heat. Operating temperature range is -60 to +150°C. Type 20-3650 is suitable for meter mix and dispense equipment.