Huntsman Advanced Materials
Los Angeles, CA 90039
Feb 17, 2004 Offering 55 min work life, UV-absorbing Araldite® AAY-8591 resin/HY-8591 hardener system cures after 60 min at 158°F, 20 min at 212°F, or 5 min at 302°F. With elevated temperature cure, it exhibits lap shear strength of ~2,200 psi and Shore hardness of 65D. Low-viscosity, easy-to-spread epoxy bonds glass to glass and metals to ceramics. It is suited for manufacturing welding helmets and other products in which UV transmission issues are important.

Tra-Con, Inc.
Bedford, MA 01730
Jan 23, 2004 Thermally-conductive TRA-BOND 224-8 can cure in 4 hours at room temperature or as short as 3 min at 95°C. It offers 30 min work life and shelf life up to 1 year. Viscosity of 20,000 cp ensures that adhesive will flow into most small voids and creases. Combined with electrical insulator, product is suited for encapsulation, component staking, and sealing. Package options include BI-PAX and premixed, frozen syringes.

ITW Devcon Futura Coatings
St. Louis, MO 63132-1021
Jan 21, 2004 Ceramic Coat® epoxy system is formulated to repair, rebuild, and protect surfaces subject to corrosion or wear, negating need for replacement parts. After reframing, damaged blades can be rebuilt to original specifications with trowelable CT 3000® and then protected with brushable Ceramic Coat 4000®. Applications include pump casings, impeller blades, suction plates, gate and butterfly valves, water boxes, tube sheets, and heat exchangers.

Tra-Con, Inc.
Bedford, MA 01730
Jan 12, 2004 Clear, medium-viscosity Tra-Bond 2105 contains no solvents or other additives that could be harmful to environment or users. It bonds to glass, ceramics, most plastics, and metals. Product can be heat or room temperature cured and passes cytotoxicity ISO elution method. It is recommended for applications such as repair of fiber optic connectors, electronic and aerospace systems, medical device assembly, and structural laminating applications.

Tra-Con, Inc.
Bedford, MA 01730
Dec 30, 2003 Clear, low-viscosity (500 cps) Tra-Cast 3010 bonds to ceramics, glass, metals, and plastics. With 65 Shore A hardness and operational temperature range of -70 to 105°C, product is suited for aerospace and electronic applications. Fully cured adhesive acts as electric insulator and is resistant to weathering, gases, vapors, petroleum products, and harsh chemicals. It has volume resistance of 10¹² ohm-cm and work life of 8 hr.

Tra-Con, Inc.
Bedford, MA 01730
Dec 22, 2003 High-temperature TRA-BOND 526M02 features glass transition temperature of over 150°C and can be heat-cured in as quickly as 10 min at 140°C. It adheres well to most metals, plastics, glass, and ceramics. Product exhibits resistance to most petroleum products, many vapors and gases, and many organic compounds. Applications include potting glass fibers, bonding fiber bundles, and terminating connectors.

Tra-Con, Inc.
Bedford, MA 01730
Dec 10, 2003 Tra-Bond CA20 Coil-Fix Epoxy Adhesive is formulated for shortened turns, damaged end wire extensions, or other coil repair applications that require high-fill, non-sag adhesive. Thixotropic epoxy adhesive system is dark-red to brown in color, blends with commonly used insulating varnishes, and bonds to metals, glass, ceramics, and other coil coatings and insulators. Product is solvent-free and can be heat- or room temperature-cured.

Tra-Con, Inc.
Bedford, MA 01730
Dec 10, 2003 When fully cured, Tra-Bond 2212 two-part epoxy provides strong bonds between wide range of materials such as plastics, metals, glass, and ceramics. Amber-colored, medium viscosity product offers impact shock resistance and can withstand temperature cycling up to 200°C.

Aremco Products, Inc.
Valley Cottage, NY 10989
Nov 26, 2003 Pyro-Putty™ 657 repairs pin holes, cracks, and defects in cast iron and sheet metal prior to painting and powder coating. Stainless steel filled, 1-to-1 mix epoxy system provides continuous and intermittent temperature limits of 400 and 450°F, respectively. Dispensable, thixotropic paste cures fully at room temperature in 4–6 hr; cured material exhibits tensile shear strength of 1,860 psi and is resistant to acids, alkalis, salts, and organic fluids.

Cotronics Corp.
Brooklyn, NY 11232
Nov 26, 2003 Bond-It(TM) 7056 adheres to smooth, rough, or porous surfaces, most plastics, metals, ceramics, glass, and wood and is suitable for joining dissimilar materials. It cures as fast as 4 min, with no fixtures or clamps, to form bond with tensile strength of 3,000 psi at room temperature. Product rebuilds surfaces and fills gaps measuring up to ¼ in. It has no sulphur like odors, volatiles, or solvents and offers electrical, thermal, and chemical resistance.

Cotronics Corp.
Brooklyn, NY 11232
Nov 26, 2003 Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250°F to form machinable material for use up to 500°F. Durabond 7025, rated to 1,000°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250°F. Durabond 7032 Stainless Steel-Ceramic composite is rated to 2,000°F. All are applied by trowel without running, dripping, or sagging.

Tra-Con, Inc.
Bedford, MA 01730
Oct 22, 2003 Tra-Bond 2103 2-part, medium viscosity, near transparent adhesive provides rigid sealing, laminating, and bonding. It bonds well to ceramics, metals, glass, composites, and most rigid plastics. Able to cure in 24 hr at room temperature, epoxy cures faster at elevated temperatures.

Tra-Con, Inc.
Bedford, MA 01730
Oct 20, 2003 Tra-Bond 970-1N1 sag resistant epoxy adhesive develops aluminum-to-aluminum lab shear strength of 3,000 psi, can reach glass transition temperature of 83°C, and cures to 75 shore D hardness. Available in sizes and packaging to match unique application needs, product is offered in pre-mixed and frozen syringes or in Bipax for room temperature storage.

Tra-Con, Inc.
Bedford, MA 01730
Oct 20, 2003 Heat-resistant, one-part, solvent-free TRA-BOND 77-1S has glass-transition temperature of 200°C and withstands 1,000 hr at 100°C and 95% RH. It has working life of 3 months at 25°C and smooth consistency. Dispensed through fine-diameter needles, adhesive does not sag or tail. Cured product has lap shear strength of 2,400 psi and 94 Shore D hardness. Applications include attaching surface-mounted devices to circuit boards or other electronic devices.

Devcon
Danvers, MA 01923
Oct 17, 2003 Self-leveling, 100% solids 10 Minute™ Epoxy adhesive is formulated for bonding, potting, and cosmetic repairs in various OEM applications. Able to adhere to varied substrates, it is available in clear and black and has fixture time of 20 min. Functional cure is attained in 90 min. Cured product has 2,400 psi tensile shear strength, 20–25 pli peel strength, and 10 lb-ft/in² impact resistance. Bonds withstand service temperatures from -67 to 200°F.

Tra-Con, Inc.
Bedford, MA 01730
Oct 16, 2003 TRA-BOND F253M two-part, low viscosity epoxy minimizes fiber pistoning and moisture absorption while maintaining long pot life and high temperature performance. Unmixed components are yellow and turn greenish blue upon mixing. With full cure, epoxy turns deep reddish-amber. Material develops strong bonds to fiber optic and optical materials that include most metals, ceramics, glass, and plastics.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Sep 25, 2003 Hysol® FP4580 low stress liquid epoxy prevents cracking and delamination of chip's inner layers. It works on copper/low k flip chip laminate packages up to 50 x 50 mm with over 4,000 solder bumps. When fully cured, product forms rigid, low warp seal that dissipates stress on solder joints and extends thermal cycling performance. Hysol® FP4580 underfills devices with gaps as small as 12 microns and meets JEDEC Level 3 245°C preconditioning requirements.

Tra-Con, Inc.
Bedford, MA 01730
Sep 17, 2003 TRA-BOND 224-1 cures in 4 hrs at room temperature or 3 minutes at 95°C. Fast cure has 30 min work life after dispensing. Its 20,000 cps viscosity ensures that product will flow into most small voids and creases. With shelf life of up to 1 year, hard adhesive can be used in applications from encapsulation to component staking and sealing. Package options include BI-PAX and premixed, frozen syringes.

Tra-Con, Inc.
Bedford, MA 01730
Sep 17, 2003 TRA-BOND 2248 high-temperature epoxy staking adhesive bonds to metals, glass, ceramics, and plastics in applications up to 190°C.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Sep 12, 2003 Hysol® U-09FL features storage stability, and once mixed, offers 10 minute work-life. Two-component urethane cures at room temperature in 3-24 hr. Ultra-clear and highly flexible, product is suited for applications that require clear, non-yellowing bondline. Hysol U-09FL bonds polycarbonate and variety of other plastics, as well as glass and metal.