Excel Scientific Inc
Wrightwood, CA 92397
May 22, 2008 Used with white clear-bottom microplates, BrightMax(TM) Adhesive White Vinyl Films help to maximize signals in luminescence assays. Split backing facilitates application of film to either top or bottom of plate. Applied to bottom of 96-well filter plate, film provides medium for holding dried filters removed from plate for microscopic examination and storage.

Stik-II Products
Easthampton, MA 01027
May 22, 2008 PermaSTIK Ultra High Bond Tape is available in thicknesses from 16-60 mil in water clear solid acrylic foam tape and gray or white coated acrylic foam tape, standard red poly liner, and widths from 3/8 to full log widths up to 34.5 in. It can be used for bonding architectural parts for windows and doors, trailer, RV, boat, bus and train manufacturing, appliance manufacturing, electronics manufacturing, including LCD displays and cell phones, and signage.

Rawl Plug Co.
New Rochelle, NY 10801
May 21, 2008 Listed as category 1 product for uncracked concrete and dry holes, PE1000+ features 3:1 ratio holding power and meets International Building Code (IBC) requirements for strength design (Cracked Concrete). Dual-component system comes in 13 oz cartridge made from engineered plastic and can be dispensed with manually or pneumatically operated injection tool. Uses include anchoring threaded rod, bolts, reinforcing bars, and smooth dowels into concrete and other solid base materials.

Nova Films & Foils
Bedford, OH 44146
May 20, 2008 Designed for mounting to glass and high impact polystyrene, Permanent/Removable Double Coated Adhesives can be removed without leaving adhesive residue. Products come with clear/white carrier for opacity, coated with removable (low tack) adhesive on liner side and permanent (high tack) adhesive on exposed side. They are recommended for long- or short-term window displays, store signage, and graphics that temporarily replace existing display sign and for backlit displays.

Scapa North America
Windsor, CT 06095
May 19, 2008 Intended for general-purpose bonding and electronic product assembly, Thermofilm® H212U provides structural bond strength on plastics, metals, ceramics, wood, paper, and woven materials. Adhesive activates and cures on exposure to heat and pressure, and once cured, offers resistance to solvents, plasticizers, and elevated temperatures. Measuring 2 mil thick, nitrile phenolic thermosetting transfer adhesive is supplied on temperature-resistant, kraft release liner.

Honeywell International, Inc.
Morristown, NJ 07960-4648
May 09, 2008 PowerShield(TM) PV325 protects photovoltaic (PV) modules and their critical components in all types of environments such as humid conditions. It is UV-, moisture, - and weather-resistant, and can also withstand electrical load produced by modules. Based on barrier film technology, reflective white material has 5-layer design that includes 2 outer protective layers based on ECTFE fluoropolymer film and core PET layer, as well as 2 inner bonding layers of adhesive material.

Epoxies Etc.
Cranston, RI 02921-3407
May 06, 2008 One-component, electrically conductive 40-3910 is formulated for electrical and mechanical bonding of semiconductor, capacitor, and resistor chips in micro and opto-electronic hybrid circuit fabrication. Product does not require dry ice during transit and cures quickly at low temperatures. It provides optimized retention of strength after environmental aging.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2008 With mix ratio of 100:65 by weight, EP29LPSP can withstand temperatures to 4 K, and resist cryogenic shocks (room temperature down to liquid helium temperatures in 5-10 min time period). It cures at room temperatures, and can be heat cured at 130-165°F for 6-8 hr. Chemical resistant adhesive features mixed viscosity of 400 cps, tensile strength of 6,500 psi, tensile modulus of greater than 375,000 psi, volume resistivity greater than 1,015 W cm, and Shore D hardness of 80.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2008 With ability to withstand temperatures up to 500°F, 2-component optically clear EP121CL cures to tough solid with chemical resistance even when exposed to adverse environmental conditions. It features 12,100 psi tensile strength, 17,200 psi compressive strength, volume resistivity greater than 3 x 1,014 ohmW cm, dissipation factor of 0.020 at 1 MHz, and dielectric constant of 3.34 at 60 Hz. EP121CL is also available in 1-component and thermally conductive versions.

Huntsman Corp.
The Woodlands, TX 77380
May 02, 2008 Formulated for joining glass-reinforced plastics, SMC, ABS, and PVC, Araldite® 2055 adhesive is paste that has work life of 45-60 min at room temperature and bonded components can be handled after 6 hr at 73ºF. Thixotropic and gap-filling polyurethane adhesive is packaged in 400 mL dual-barrel cartridges that ensure thorough blending with disposable static mix nozzles.

National Adhesives
Bridgewater, NJ 08807
May 02, 2008 Suited for moderate and difficult substrates in folding carton and glued lap applications, high pressure VelocityP3(TM) 33-715A(600 cps) and low pressure 33-715B (300 cps) clean-running adhesives eliminate build-up on nozzles and do not trail during application. They are resistant to water, heat, and cold, and are compatible with extrusion systems including those from Bobst, HHS, Valco, Nordson, Pafra, Leary, and ITW.

National Adhesives
Bridgewater, NJ 08807
May 02, 2008 Designed to solve problems associated with nozzle build-up, VECTORSEAM® Adhesives allow tight tolerances on envelope seams and enable consistent cut-off, even at high speeds. VECTORSEAM family includes 3 adhesives covering general purpose, slower setting, and best machining options.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 30, 2008 Crystalbond(TM) 509 is high-strength, thermoplastic adhesive used to temporarily secure alumina substrates and other technical ceramic materials for dicing, grinding, and polishing operations. It is applied by preheating mounting plate to 250°F, melting and spreading adhesive in uniform layer, then positioning part over adhesive, allowing assembly to cool. It dissolves in acetone or Aremco 509-S environmentally friendly cleaning agent that leaves no film or residue.

Henkel
Rocky Hill, CT 06067
Apr 30, 2008 Compatible with various paint systems, Terostat® 7100(TM) Adhesive/Sealant and Terostat 7700(TM) Adhesive are primerless, permanently elastic formulations used to bond and seal dissimilar substrates. Both one-component, odorless adhesives are non-corrosive and free of solvents, isocyanates, silicones, and PVC. They resist aging and weathering, cure by reacting with ambient moisture, and achieve functional strength in 24 hr.

Scapa North America
Windsor, CT 06095
Apr 29, 2008 Consisting of thin polyester carrier coated on each side with pressure sensitive acrylic adhesive, Dublfilm S1086 is suited for general-purpose product assembly involving ABS, polyethylene, polypropylene, polystyrene, and many foams. Adhesive withstands range of environmental extremes and offers UV, humidity, and temperature/chemical resistance. Supplied with 76 No. polycoated release liner, Dublfilm S1086 provides balance of peel and shear strength.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 18, 2008 Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 18, 2008 Used to bond aluminum panels and copper heat exchange tubes, Aremco-Bond(TM) 568 is aluminum-filled epoxy system that offers thermal conductivity of 9.0 Btu-in./hr-ft²-°F and flexural and tensile strength of 11,400 and 2,500 psi, respectively. Resistant to acids, bases, salts, and organic fluids, it mixes in 1:1 ratio by weight or volume, cures at room temperature or with low heat, and provides total mass loss of 0.75% at 125ºC and 0.35% of collected volatile condensable materials at 25ºC.

Huntsman Corp.
The Woodlands, TX 77380
Apr 18, 2008 Araldite® 2018 is light-colored, low-viscosity polyurethane adhesive formulated for joining ABS, SMC, polycarbonate, and glass-reinforced plastics. Maintaining bonds when exposed to vibration, water, and UV light, thixotropic, gap-filling adhesive cures in 16 hr at 73ºF or in 3 hr at 104ºF. It is packaged in dual-barrel cartridges that provide for precise ratio control of resin and hardener.

Omega Engineering, Inc. - omega.com
Stamford, CT 06907-0047
Apr 17, 2008 Designed for process temperature control, freeze protection, and supplemental heat, HTWAT series tapes offer adjustable thermostat control up to 425°F and are resistant to moisture as well as chemicals. In addition to being suited for electrically conductive surfaces, CE-compliant products can be used on valves, pipe lines, bearings, filter housings, and actuators. Areas of use include manufacturing, construction, petroleum, and public works industries.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 15, 2008 Adhesin® 56-5545(TM) water-based adhesive for wet-bonding insulation to metal ducts and cabinets may be applied using spray gun or hand-applied with brush or roller. Offering UL Class 1 certification, it meets ASTM E-84 and ASTM C-916 requirements and dries in less than 10 min. For proper drying, adhesive must be used with at least one porous substrate. It can be used on painted or unpainted metals and is available in 5 gal pails and 275 gal tote containers.