ITW Devcon Environmental Products
Danvers, MA 01923
Sep 10, 2007 Able to withstand service temperatures from -­65 to 300°F, Permatex® GEL SQUEEZE(TM) Threadlockers prevent fastener loosening and failure caused by vibration and shock. All-purpose Permatex Medium Strength BLUE GEL SQUEEZE is suited for threaded assemblies ¼-1 in. dia and exhibits 115/53 lb-in. of break/prevail torque, while Permatex High Strength RED GEL SQUEEZE is suited for threaded assemblies 3/8-1 in. or more in dia, and exhibits break/prevail torque of 175/230 lb-in.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 07, 2007 Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 W cm, and 10:1 mix ratio by weight. Low viscosity assures complete fill-in around complicated contours.

Epoxies Etc.
Cranston, RI 02921-3407
Aug 29, 2007 Filled with pure silver, electrically conductive 40-3900 features electrical resistivity value of less than 1 x 10^-4 W-cm and operating temperature range of -50 to +170°C. Product cures in 24 hr at 25°C, 1 hr at 65°C or 15 min at 90°C. In addition to chip bonding in microelectronic and optoelectronic applications, 2-component resin is suited for microwave EMI and RFI shielding, assembly and repair of PCBs, and as cold solder.

DriTac Adhesive Group
Brooklyn, NY 11237
Aug 24, 2007 DriTac 7500 Eco-Urethane offers solvent-free, spreadable moisture cure urethane adhesive that contains zero VOCs and is suited for all green wood flooring building projects. Available in 2 and 4 gal containers, freeze-thaw-stable and non-slumping product contains no water and provides permanent bond for range of wood flooring options. It is suitable for above, on, or below grade installations and remains elastomeric to allow for normal expansion and contraction of wood flooring.

Henkel Corp.
Madison Heights, MI 48071
Aug 21, 2007 Designed to streamline die attach process, Hysol® QMI5100 and QMI5200 are formulated to combine properties and functions of die attach film and dicing tape. Curing takes place during standard molding process, eliminating need for dispensing or curing equipment. Formulated as pressure sensitive release materials, products leave no burrs after dicing, promote bondline thickness control, and enable die placement times down to 0.1 sec.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 17, 2007 Pyro-Paint(TM) 634-AS-1 is used to bond, coat, and seal refractory fiberboard used in construction of IR heaters and molten metal handling components in foundry applications to 2,300°F. Applied by brush, roller, or spray equipment, this alumina-silica based, fiber-reinforced, ceramic coating system is resistant to wetting by non-ferrous molten metals and adheres to refractory fiberboard, graphite, as well as ceramic cloth and paper. Water-based formulation contains no VOCs.

Covalence Adhesives
Franklin, MA 02038
Aug 17, 2007 Patco 9425FR clear 6 mil, 2-layer tape features pressure sensitive flame retardant hydrophobic acrylic adhesive system as one layer and transparent flame retardant, mold and fungal resistant polyurethane film on the other. Formulated with non-polybrominated biphenyl ethers and non-polybrominated biphenyls, tape is moderately aggressive yet repositionable; adhesion builds 30-40% in 24 hours. It meets F.A.R 25.853a interior aircraft burn requirements.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 16, 2007 Offering temperature resistance up to 350°F, Aremco-Bond(TM) 2300 consists of 100% solids epoxy mixed in ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 cP and pot life for 100 g mass is approximately 45 min. Milky-clear product provides resistance to acids, alkalis, organic fluids, and salts. Supplied in pint, quart, and gallon kits, adhesive is suited for bonding engineered thermoplastics, ceramic wear tiles, and sheet molding compounds.

Henkel Corp.
Madison Heights, MI 48071
Aug 16, 2007 Formulated for manufacturing flexibility through ease of set-up and consistent performance, Hysol® QMI708(TM) is developed to attach die 2.5 x 2.5 mm and smaller in QFN and SOIC packages using copper finished leadframes. Conductive product exhibits minimal bondjoint resistance, minimizing energy drainage. Properties of this material allow for wide dispense window, and product dispenses without tailing.

Hexis USA LLC
Corona, CA 92880
Aug 07, 2007 Available in 48 in. x 65 ft rolls, Carprotect transparent 5.9 mil film with shockproofing properties protects vehicle paintwork against environmental aggressions. It protects vehicle bodywork, doorsills, bumpers, headlights, and wing mirrors against damage from stone chips. Film resists carwash brushes, high-pressure steam cleaners, abrasion, friction, exposure to sunlight, and petrol spillage. Adhesive formulation allows clean removal of film without leaving adhesive residues.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 20, 2007 Combining thermoplastic rubber with butyl rubber sealant, FSTW Tape provides complete rejacketing solution in one pass and delivers submersible watertight seal. With 50 mil thickness, FSTW offers puncture protection. It is available in point-of-purchase packages of five 4 ft rolls or bulk packaging of twelve 6 ft rolls. Tape is suited for repairing cable jackets, sealing low voltage splices, and rejacketing of medium voltage cable splices.

Adchem Corp.
Riverhead, NY 11901
Jul 19, 2007 Used in temperatures to 300°F, 7740 series delivers bond strengths sufficient for splicing metal coils and other demanding applications. Tape adhere to metals and plastics, including low surface energy substrates, and fiber reinforcement provides stability when product is slit to widths as narrow as 1/8 in. Utilizing pressure-sensitive acrylic adhesive system 7742-74 (2 mil) and 7745-74 (4 mil) are resistant to thermal cycling, salt solution, acid, brake fluid, and UV environments.

Hexis USA LLC
Corona, CA 92880
Jul 17, 2007 Suitable for solvent and eco-solvent inkjet printers, HX102CG1 consists of clear cast 2 mil vinyl with embossed liner carrying structured adhesive. Product stays repositionable during application for transfers without bubbles onto vehicles, corrugated surfaces, and other difficult substrates. It comes in 54 in. wide rolls in lengths of 148, 328, or 656 ft.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 10, 2007 Suited for applications up to 3,200°F, magnesium oxide-based Ceramabond(TM) 571 demonstrates volume resistivity of 109 W-cm, dielectric strength of 255 V/mil, and tensile shear strength of 500 psi. Two-part, water-based product features mixed ratio of 1.5 parts powder to 1.0 parts liquid by weight. Adhesive sets at room temperature and is cured rapidly at 200°F in 1-2 hr. It is completely inorganic with no VOCs and will not outgas in ultra high vacuum.

Pres-On Products, Inc.
Addison, IL 60101
Jun 29, 2007 Offered in widths of 3/16-18 in., 0.045 in. thick PHB2000 provides pressure-sensitive bonding while also serving to reduce and dampen vibration and sound. Uniform, high-tack acrylic adhesive on both sides bonds to most substrates and withstands weathering from moisture and sub-zero temperatures without loss of bond strength. Flexible, moldable, and compressionable, tape conforms to intricate shapes during manufacturing and will not stain or harden due to age.

Dymax Corp.
Torrington, CT 06790
Jun 28, 2007 Suited for medical devices, DYMAX MD® 1161-M provides single solution for bonding various combinations of dissimilar substrates such as polycarbonate, acrylic, nylon, stainless steel, PVC, and polyurethane. Product cures in seconds upon exposure to UV/visible light, and fluoresces under low-intensity black light for immediate in-line functional testing and inspection.

Dymax Corp.
Torrington, CT 06790
Jun 26, 2007 Formulated for applications where clear, invisible bonds are required, LCD Adhesives resist yellowing, allowing for optimal light transmission. With UV light, solvent-free products bond in seconds to variety of substrates including polycarbonate, glass, CAB, acrylic Phenolic, PET, and ITO. On demand cure means substrates can be repositioned precisely until parts are ready to be cured. Minimized air entrapment and no bubbles create ripple-free bonds for panel strength.

Huntsman Advanced Materials
Los Angeles, CA 90039-1011
Jun 25, 2007 Specifically formulated for bonding thermoplastics, Araldite® 2018 polyurethane is supplied as 2-component system that produces bonds with UV stability. It attains handling strength after 4 hr at room temperature or 4 min at 212ºF. Designed for use on polyamides, thermoset composites, ABS, metals, and ceramic substrates, Araldite 2055 gap-filling polyurethane has 1 hr pot life and maintains bond strength when exposed to fluids, heat, and humidity. It can be cured in 20 min at 212ºF.

Cotronics Corp.
Brooklyn, NY 11232
Jun 05, 2007 Able to adhere to plastic surfaces as well as metals, ceramics, and glass, Bond-It 7050 bonds to Nylon, PVC, and dissimilar/difficult-to-bond materials. No special surface preparation is required. Users mix and apply, and product cures at room temperature to form 400°F bonds that exhibit temperature stability as well as electrical, thermal, and chemical resistance. Available in regular or fast-setting grades, activated 400°F epoxy incorporates adhesion promoters into its structure.

Kimball-Midwest
Columbus, OH 43228
Jun 05, 2007 Performing in temperatures ranging from -65 to 300°F, Torque-Lok Gel Threadlocker is offered in Medium Strength Blue, and High Strength Red. No-mess dispenser provides application control. Medium Strength Blue locks fasteners from ¼-¾ in. but fasteners can be removed with hand tools. High Strength Red permanently locks thredded fasteners and adds up to 3,000 psi shear strength.