Revere Products    Cleveland, OH 44135 0311
Jun 06, 2005 Epoxi Gel Patch is a 100% solids epoxy gel for patching cracks, divots, and other minor deformities in concrete floors. Components come in factory-portioned units to eliminate mixing errors. Smooth consistency enables product to be applied with spatula, spackle knife, or flat trowel. Epoxi Gel Patch is suited for use in facilities that limit use of solvents and fine, loose silica.

Pres-On Tape & Gasket Corp.    Addison, IL 60101
Jun 03, 2005 To facilitate window, door, and mirror fabrication, cross-linked polyethylene foam tape adheres instantly to vinyl, aluminum, treated wood, or glass. It complies with AAMA test standards and is resistant to water as well as UV, age, and temperature extremes. Offered in 1/32, 1/16, and 1/8 in. thicknesses as well as custom sizes, tape is available with rubber and acrylic adhesive systems, both offered in black or white.

Scapa North America    Windsor, CT 06095
May 27, 2005 Formulated for wear- and abrasion-resistance in high-friction automotive applications, Scapa P989BK consists of 3 mil black polyethylene film, single-coated with acrylic adhesive. Pressure-sensitive, adhesive film is inert to chemicals and solvents and supplied on 64 lb lay-flat kraft release liner. Applications include pipe and harness protection, separation of dissimilar metals, anti-squeak and rattle protection, and sound damping.

Tra-Con, Inc.    Bedford, MA 01730
May 19, 2005 TRA-BOND 2143D medium viscosity polyamide epoxy adhesive is supplied in 2-part formulation that cures at room temperature or under heat. Able to bond with metals, plastics, glass, ceramics, leather, rubber, and wood, rigid compound exhibits Tg of 65°C, minimal moisture absorbance, and lap shear strength of 2,200 psi. It is suited for applications where impact resistance is required.

Devcon    Danvers, MA 01923
May 19, 2005 Safety Clear Coat™ seals and protects glass, metal, ceramics, wood, phenolics, composites, fabrics, and concrete against impact and wear. Self-leveling, UV-stable product is water-clear, maintains clarity over time, provides tensile elongation of 150%, and has no VOC emissions. Epoxy formulation features mixed viscosity of 3,500 cps, working time of 30–40 min, and functional cure time of 8–10 hr. After 24 hr, adhesive provides hardness of 55 Shore D.

Cotronics Corp.    Brooklyn, NY 11232
May 12, 2005 Duralco 4538 can be tailored to meet application requirement by varying mix ratio of resin to hardener, resulting in exact degree of flexibility needed. Product cures at room temperature, without odors, to provide thermal and mechanical shock resistance, adhesion to dissimilar substrates, and electrical and chemical resistance. Duralco 4538 will not gum up or soften at elevated temperatures and withstands thermal cycling from -100 to +300°F.

Rayven, Inc.    St. Paul, MN 55104
May 11, 2005 Combining optical clarity with temperature and chemical resistance, 5000 Series adheres to various surfaces and can be used to join similar and dissimilar materials where UV resistance is required. It is supplied as 2 and 4 mil thick tape, with standard length of 180 yd and common widths of 12, 18, 24, and 27 in. Product resists ooze and movement, making it suited for sub-surface and industrial applications as well as POP Displays and nameplates.

Permabond    Somerset, NJ 08873
May 11, 2005 Formulated for bonding plastics, metal, composites, ceramics, wood, and glass, Structural Acrylic Adhesives cure to handling strength within minutes and achieve working strength within 30 minutes. Products are available as separate adhesive with brush on initiator or as no-mix bead-on-bead acrylic. Non-flammable adhesives are resistant to impact, shear, and peel loads, making them suitable for high-stress applications.

Westech Aerosol Corporation    Port Orchard, WA 98367
May 10, 2005 Ekho dispenses in thin bond line for optimal user control and smooth, consistent bead. It features post-application clamp time of 10–15 min and can be used in place of hot melt and polyurethanes as well as 2-part and multi-stage epoxy adhesive systems. For application, users are required only to trim nozzle.

Adhesives Research, Inc.    Glen Rock, PA 17327
May 10, 2005 Dual-Stage Pressure-Sensitive Adhesive/UV technology employs transformable, 2-stage adhesive supplied in peel-and-stick, coated tape format. Once applied, in combination with barrier substrate, momentary exposure to UV light transforms adhesive into permanent bond, protecting against oxygen, moisture, and chemical damage. Optically clear, low-outgassing system is suited for display manufacturing and enables roll-to-roll manufacturing for discrete or multiple part assembly.

Permabond    Somerset, NJ 08873
May 09, 2005 Able to adhere to various substrates, single-part adhesives allow for accurate alignment of components since adhesive will not cure until exposed to UV light. Non-yellowing products, designed for optical clarity, are available in range of viscosities to suit gap fill requirements of joints. Flexible, shock- and impact-resistant grade is also available, suited for areas where differential thermal expansion is of concern.

Master Bond, Inc.    Hackensack, NJ 07601
May 06, 2005 Flexible, optically clear UV19 cures upon exposure to UV light at ambient temperatures. Compound is 100% reactive, does not contain any volatiles, and offers abrasion resistance and heat stability. With tensile strength in excess of 800 psi and viscosity of less than 300 cps at 75°F, compound is suited for laminating, sealing, and bonding to substrates with different thermal expansion coefficients.

Master Bond, Inc.    Hackensack, NJ 07601
May 04, 2005 Thermally conductive, 2-part EP21TDCAOHT bonds dissimilar substrates with different coefficients of expansion and contraction. Adhering to metals, ceramics, glass, rubbers, and plastics, product has 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Exhibiting thermal and mechanical shock resistance, it has paste viscosity, 35 pli T-peel strength, and service operating temperature range of -100 to +350°F.

Dow Corning Corp.    Midland, MI 48686 0994
May 04, 2005 Dow Corning® 111 heavy-consistency, dimethyl silicone compound maintains serviceable consistency from -70 to +400°F. Acceptable as release agent under FDA 21 CFR 175.300, it carries NSF 51 and NSF 61 approvals. Product can be used as lubricant for rubber and plastic O-rings, water softener and faucet valves, and electronic and ignition systems. It may also be used as sealant in transformer gaskets, equipment enclosures, and equipment subject to harsh environments.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 04, 2005 Electrically conductive Loctite® QMI529HT addresses requirements of higher-temperature processes such as lead-free manufacturing. Suited for attachment of ICs and components to metallic lead frames, silver-filled adhesive offers hydrophobic properties and temperature stability for production of void-free bond lines. Bismaleimide formulation can be SkipCured(TM) on diebonder or wirebonder preheater and can be converted into controlled collapse spacer paste.

Ticona Engineering Polymers    Florence, KY 41042
Apr 29, 2005 Topas COC (cyclic olefin copolymer) enables blown film producers to make transparent films free of gels. Topas 8007F-400 clear cyclo-olefin copolymer adheres to polyolefins, can be metallized and colored, and has inherent moisture barrier. It also features 2,500 MPa modulus and 80°C glass transition temperature. Product may be used in multilayer as discrete or COC-rich layers, or in blown films for applications such as pouches, flow-pack, lidding, and twist wrap.

3M    St. Paul, MN 55144
Apr 27, 2005 Usable for applications involving expanded or extruded polystyrene, Polystyrene Foam Insulation 78 Spray Adhesive dries in 5 min when applied to single surface and in 15 min when applied to both surfaces. Resisting temperatures up to 140ºF, product contains no methylene chloride, CFCs, or 1,1,1-trichlorethane. Adhesive is available in no-clog pressurized cylinder, 24 oz aerosol can, and 5 and 55 gal bulk containers.

Aremco Products, Inc.    Valley Cottage, NY 10989
Apr 22, 2005 Single-part, high-temperature Pyro-Puttyâ„¢ 1500 is used as sealant and gasketing compound in primary metal, foundry, and smelting industries for service conditions to 2,300°F. Non-toxic product will not shrink or crack on hot molds, and will not affect metallurgy of molten metals. It can be applied to tools before assembly, spot applied to bad joints after assembly, or used to seal vertical mold cracks. Product density is 11 lb/gal.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 22, 2005 Color-coded for identification, Threadlockers come in medium and high strength formulas, as well as penetrating version. Products positively lock and seal threaded fasteners against vibration loosening and protect threads against corrosion, eliminating need for lock nuts and washers. Specified by automotive OEMs for use on assembly lines, adhesives are suited for applications ranging from delicate fuel injection components to heavy-duty transmission and engine assemblies.

Tra-Con, Inc.    Bedford, MA 01730
Apr 21, 2005 Clear, low-viscosity TRA-BOND F230 offers Shore D hardness of 85, pot life of 1 hour, and can be cured in as little as 1 min at 150°C. Product is suited for termination of single and multi-mode connectors, and bonds to variety of optical materials. Featuring operating temperature of -60 to 175°C, adhesive offers impact and thermal shock resistance. Unmixed components are light yellow, while mixture is light green, and fully cured adhesive is reddish-amber.