Tra-Con, Inc.
Bedford, MA 01730
Apr 08, 2004 Moisture-resistant TRA-BOND 789-3T3N1 is suited for side mount staking of components and any application were resistance to wicking and flow is critical. Product exhibits electrical resistance and has viscosity of over 200,000 cps. Thermal expansion coefficient ensures bonding to substrates, and product works on hard-to-bond substrates such as nickel, gold, and copper.

Scapa North America
Windsor, CT 06095
Apr 02, 2004 Unifilm® U666 is a 1.5 mil acrylic adhesive transfer film formulated with UV stabilizer. Moisture-stable, poly-coated liner prevents wrinkles and allows smooth application. Film is suited for labels and stickers that are adhered to glass and regularly exposed to sunlight, such as parking permits, inspection stickers, and decals.

Scapa North America
Windsor, CT 06095
Apr 02, 2004 Bioflex® Rx268S consists of medical-grade polyethylene film, double-coated with acrylic pressure-sensitive adhesive which adheres to skin, yet removes without causing skin trauma. Film is supplied on white densified kraft release liner that allows die cutting. Bioflex® Rx268S is suited for attaching medical devices to skin and for surgical drape fabrication.

Devcon
Danvers, MA 01923
Mar 24, 2004 Effective at temperatures to 250°F (dry) and 125°F (wet), 4 oz Magic Bond(TM) Epoxy Stick consists of 2-part epoxy putty designed to seal leaks and repair gouges in steel, aluminum, wood, fiberglass, concrete, and ceramics. Product mixes by hand kneading, hardening in 30-40 min to finish that can be painted, sanded, machined, tapped, or drilled. Dual-color putty stick includes resin (green) and activator (white), which blend to uniform light gray.

Garon Products, Inc.
Wall, NJ 07719 1924
Mar 23, 2004 Tigerthane 220â„¢ fills expansion joints and permits sections of concrete floor to expand and contract in response to temperature changes in surface. Material, which consists of 100% solids, 2-part, polyurea elastomer, will not become brittle or break out with movement. Joint sealant sets in applications with temperatures from freezing to 130°F and is traffic-ready within 60 min.

Seton Identification Products
Branford, CT 06405 0819
Mar 19, 2004 During power outages or other situations where lights are off, SetonGloâ„¢ Photoluminescent Fire and Exit Signs help employees find their way out while avoiding hazardous equipment, situations, and materials. Signs are available in aluminum, plastic, and self-adhesive materials in various sizes. SetonGlo tapes are offered in stripes, solids, and V- and arrow-styles. Glow-in-the-dark aisle marking arrows, dots, and footprints are also available.

Tra-Con, Inc.
Bedford, MA 01730
Mar 19, 2004 Tra-Bond 816H02 is suitable for stacking transistors, diodes, resistors, and integrated circuits to PCBs. Rheology of adhesive allows it to stay in place once dispensed. It bonds readily to metals, silica, steatite, sapphire, ceramics, glass, and plastics. It can be cured at room temperature to Shore D Hardness of 90 and has working life of 1.5 hr.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Mar 19, 2004 Loctite® Hysol® U-09LV is low viscosity, industrial grade, 2-component adhesive for bonding polycarbonate, PVC, other plastics, glass, and metal. After mixing, adhesive cures at room temperature and is suitable for applications that require optically clear, non-yellowing adhesive.

Scapa North America
Windsor, CT 06095
Mar 17, 2004 Able to be removed, residue-free, up to 3 months after application, Bumpergardâ„¢ 3364 consists of impact-resistant cloth tape designed for temporary automotive surface protection. Gray, cloth tape is single-coated with polyisobutylene adhesive that adheres to plastic, painted steel, and glass surfaces. UV-, ozone-, and chemical-resistant tape tears with ease to facilitate application.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 16, 2004 Two-component, nickel-filled, electrically-conductive adhesive, Type EP76M features volume resistivity of 5-10 ohm-cm and thermal conductivity of 8-9 BTU/in./ft²/hr/°F. Product develops tensile shear strength of 2,000 psi when measured and cured at room temperature. Adhesive is 100% reactive, does not contain dilutents or solvents, and offers thermal shock and chemical resistance. Service operating temperature is -60 to +250°F. Cures can be accelerated by use of heat.

Scapa North America
Windsor, CT 06095
Mar 16, 2004 Bioflex® Rx607P consists of matte polyethylene film, single-coated with medical-grade, acrylic pressure-sensitive adhesive. It provides conformability for curved areas of body, making is suited for attaching electrodes and other medical devices to skin. Tape is supplied on 61 lb polycoated release liner.

TruSeal Technologies Inc.
Beachwood, OH 44122
Mar 15, 2004 Available in black, EdgeThermâ„¢ PIB-H1 gun grade, 100% solids sealant system is based on polyisobutylene (PIB) polymer formulated to impart reinforcement, resist degradation from UV light and oxidation, and provide low moisture permeability. It resists shearing and retains flexibility through its temperature range to compensate for thermal movement of IG units. Product adheres to glass and metal.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 10, 2004 With 1:1 mix ratio, EP51ND 2-component epoxy adhesive can be applied on vertical surfaces without dripping or flowing. It spreads evenly and smoothly, and only contact pressure is required for cure. Product gels in ~5 min and cures fully at ambient temperatures. Bonded parts can be safely handled within ½ hr. Adhesive exhibits thermal shock and chemical resistance, and hardened product acts as electrical insulator. Service operating temperature is -100 to 250°F.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Suited for appearance-sensitive applications, Permabond 940 non-blooming, low-odor adhesives bond plastics, rubber, and metal. Formulated alcoxy-ethyl cyanoacrylates do not result in white frosting on surface of components surrounding bond site. Single-component adhesives cure by reacting to trace amounts of moisture on surface of substrates being bonded.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Permabond 915 methyl cyanoacrylate bonds metals, hard plastics, ceramics, and rubber to metal. Single-component adhesive cures by reacting to trace amounts of moisture on surface of substrates being bonded.

Permabond
Somerset, NJ 08873
Mar 08, 2004 PERMABOND® LH050 PURE Anaerobic Pipe Sealant fills up entire space between male and female metal components and instantly seals connection. Cured product typically exceeds burst rating of pipe and locks pipes, plugs, or fittings against vibration loosening. Single-component paste will seal even when direction in which pipe must face does not allow complete seating of threads. Disassembly of fittings for maintenance is still possible using normal tools.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Permabond® 101 low-viscosity, ethyl cyanoacrylate adhesive has consistent cure speed and bond strength. Suited for use on plastics, rubbers, and metals, product has appropriate stabilization, which maximizes performance throughout shelf-life. It can be used to bond closely fitting parts and is suited for wicking or penetrating applications. Other applications include rubber bonding, jewelry assembly, speaker bonding, and fabric bonding.

Permabond
Somerset, NJ 08873
Mar 08, 2004 PERMABOND PURE Anaerobic Adhesive/Sealants are single component liquids that cure when in contact with metal parts and oxygen is excluded. They fill gaps between mated parts by curing to hard plastic and locking assembly in place. PERMABOND PURE Threadlocking Adhesives/Sealants cure to cross linked plastic with environmental and temperature resistance. Examples include medium-strength, medium-viscosity MM115 and very low viscosity ML186 threadlocker and sealant.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Medium-viscosity, anaerobic Permabond HM130 prevents loosening of threaded fasteners and is suited for automated assembly processes. Used for cylindrical parts, Permabond HM162 retaining compound fixtures in 2-5 min. GASKETMAKER® Permabond MH196, non-flammable flange sealant forms instant, low-to-moderate pressure-resistant, leak-free seal and allows for metal-to-metal contact. Thixotropic property prevents migration before and during cure.

Permabond
Somerset, NJ 08873
Mar 08, 2004 Permabond 801 cyanoacrylate, single-component, quick setting adhesive bonds rubber, metal, and plastics in applications with temperatures up to 150°C. Clear, low-viscosity liquid fixtures in less than 10 sec on most substrates.