Gluefast Co., Inc.
Neptune, NJ 07753
Sep 24, 2004 SOLO GLUE RITER features ball-and-spring valve with flat face that allows uniform ½ in. film of adhesive to be applied. Product, supplied in 10 oz bottle, is suited for use in applying adhesive for matboard mounting, tipping and tabbing, case sealing, and spot gluing. Water-based food packaging adhesive, MATHESIVE 101, is also included.

Tyco International (US) Inc.
Princeton, NJ 08540
Sep 23, 2004 Series 9000 is comprised pressure-sensitive, solventless, double-coated or transfer tapes that bond to metals, most films and plastics, and range of rubber, sponge, and foam. Products are manufactured in master rolls of 54 and 60 in. usable by 250 linear yards, with slit sizes available. They have peel strength of 150 oz-in. and shear strength of +168 hours. Sample applications include gasketing, weatherstripping, sound/vibration damping, and cushioning.

Andax Environmental Corp.
St. Marys, KS 66536
Sep 22, 2004 De-Con Zone Barrier Tape is designed for first responders to identify 3 zones in decontamination operation. Supplied in 1,000 ft rolls, product measures 6 in. wide for maximum visibility. Each roll of color-coded tape identifies Hot (red), Warm (orange), and Cold (yellow) zones for bystander safety. Heavy-duty, tear-resistant, non-adhesive tape has attention-getting message repeated continuously in bold, black letters.

Master Bond, Inc.
Hackensack, NJ 07601
Sep 17, 2004 EP30FL Epoxy Potting and Encapsulation compound has low viscosity and can be used in both thick and thin cross sections. Generating low exotherm during cure, it cures at room temperature with low shrinkage. Electrically insulated compound adheres to both similar and dissimilar substrates, is 100% reactive, does not contain any volatiles, and withstands mechanical shock and vibration.

Permabond
Somerset, NJ 08873
Sep 13, 2004 Able to bond plastics, rubber, ceramics, and metal, Permabond 2011 cyanoacrylate adhesive will not run or sag, even on vertical surfaces. It is suited for applications that require high-viscosity for ease of dispensing or to facilitate gap filling. Used in larger gaps, cure speed will be reduced to allow for proper positioning prior to cure. Product cures by reacting with traces of moisture on substrate surfaces.

Tyco Adhesives
Norwood, MA 02062
Sep 10, 2004 Suited for building trade, Polyken® Stucco 888 Enhanced Masking Material remains attached on jobsite for periods up to 30 days in temperatures to 150°F. Multi-purpose, polyethylene-coated, cloth duct tape withstands UV radiation from sunlight and employs natural, rubber-based adhesive that sticks to rough surfaces. Bright red in color, single-coated, self-wound tape has total thickness of 11.5 mils and tensile strength of 40 lb/in.

ADM Tronics Unlimited, Inc.
Northvale, NJ 07647 1904
Sep 09, 2004 Unex Tri-Mode aqueous adhesive is suited for laminations of polypropylene to paper, polyethylene to paper, polyester to paper, and paper to foil. Product provides high degree of wetting and is applied using only conventional apparatus. Applications include converting, packaging, and graphic arts industries.

Aremco Products, Inc.
Valley Cottage, NY 10989
Sep 08, 2004 Crystalbondâ„¢ 555 temporarily mounts ceramic substrates, semiconductors, and optical crystals that require dicing, polishing, and other machining processes. Ethoxylated-nonyl-phenol material bonds to ceramics, glasses, and metals. It becomes flowable at 120°F and dissolves in hot water. Transparency in thin cross-sections allows user to observe part during processing. Adhesive comes in 10-stick package.

Huntsman Advanced Materials
Los Angeles, CA 90039-1011
Aug 30, 2004 With elongation of 50-75% and roller peel of 23 pli, XD 4662-A/B gap-filling, light yellow liquid has mixed viscosity of 60,000 cP and lap shear strength of 3,050 psi on aluminum at room temperature. Product has 1:1 pbv mix ratio and attains handling strength after 18 min and full cure after 30 min @ 77°F. Adhesive bonds metals and plastics used in mobile VHF and UHF telecommunications antennas as well as digital radio frequency antennas.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Aug 27, 2004 Medium-viscosity, UV- and moisture-curing Loctite® 5252 is designed for post-assembly use on electronic module enclosures. Based on polyether rubber technology, thixotropic sealant withstands temperatures from -40 to +125°C and offers controlled flow. It seals seams without seepage or dripping and allows users to tack material within seconds. Sealant-incorporated fluorescent dye enables online inspection for accurate, complete application.

Tesa Tape, Inc.
Charlotte, NC 28209
Aug 25, 2004 Combining high-strength backing and temperature-resistant adhesive, tesa 4445 offers high tensile strength and high shear resistance. Single-sided tape is suited for papermaking and converting environments that require web feeding, roll catching, end tabbing, and butt splicing of heavy board.

Hernon Mfg., Inc.
Sanford, FL 32771
Aug 25, 2004 HPS(TM) 1000 and 1100 seal microscopic voids in leaking porous metals such as powdered-metal castings and sintered-metal parts through vacuum application process. Both feature resistance to degradation by hydrocarbon solvents, and lubricity that lowers tool wear. Surfactant-free products facilitate washing of impregnated parts and eliminate need for pretreatment of disposed waste rinse water.

Henkel Consumer Adhesives, Inc.
Avon, OH 44011-1355
Aug 20, 2004 Duck® Tape combines high sheer strength with adhesive power on both sides to create tool suited for temporary mounting, seaming, hanging, and repair applications. Do-it-yourselfers can temporarily hang posters and project instructions, secure outdoor drop cloths, and hold plastic sheeting in place. Duck® tape releases and tears from roll with little effort.

Scapa North America
Windsor, CT 06095
Aug 19, 2004 Duofoam S3608B-PE 1/8-in. cross-linked, polyethylene foam tape is double-coated with solvent-based, pressure-sensitive adhesive. Supplied on red polyethylene release liner, tape is AAMA certified. Intended for window glazing, sound attenuation, mounting, and gasketing applications, Duofoam S3608B-PE maintains strong seal in high movement joints, provides thermal insulation, offers uniform unwind properties, and can be die cut.

3M Company / Bonding Systems Division
St. Paul, MN 55144
Aug 16, 2004 Used to replace quarter panels, roofs, box sides, utility doors, and door skins, Automix PN 08116 meets GM (6449G) and DailmerChrysler (MS-CD 507) failure-mode requirements. It facilitates non-structural repairs by reducing or eliminating need to weld. Surfaces are sealed and bonded in one application, and adhesive cures on-demand with heat. Glass beads in adhesive work as built-in spacers for optimum bond line thickness.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 06, 2004 Dual-component EP42HT-2 epoxy adhesive, sealant, coating, and casting material withstands repeated sterilizations, including radiation, ethylene oxide, chemical sterilants, and steam. Featuring service operating temperature range of -60 to +450°F, product exhibits chemical resistance and Shore D hardness greater than 75. Properties include mixed viscosity of 3,500 cps and tensile strength greater than 12,000 psi. It is castable in thicknesses exceeding 2–3 in.

Scapa North America
Windsor, CT 06095
Aug 05, 2004 Bioflex® Rx940P consists of tan polyethylene foam, single-coated with medical-grade acrylic pressure-sensitive adhesive. Offering conformability, tape adheres to skin, yet removes cleanly without causing skin trauma. In addition to applications requiring cushioning, tape is suitable for making roll form and specialized bandages, attaching general-purpose medical devices to skin, and specialty electrode applications.

A-Tiansheng Sealing Company
cixi city   China
Aug 03, 2004 Pure Expanded PTFE Sealing Tape, Type TS7300, consists of rectangular cross section PTFE tape with self-adhesive backing strip. Tape is fixed around sealing face of one flange and slightly overlapped. When flanges are bolted together it forms chemical- and solvent-resistant seal.

Rohm Electronics USA LLC
Antioch, TN 37013
Aug 03, 2004 Mor-Free 205A with coreactant C66 is a 2-component, polyurethane adhesive system for film/film, film/aluminum foil, and film/metallized film retort applications. Mor-Free 1390A with coreactant C33 is a 2-component polyurethane adhesive system that is applied at low temperature for film/film retort applications. Mor-Free ELM 415A with coreactant 88-101 is an extremely low monomer adhesive system that meets FDA requirements for hot fill and retort applications.

Scapa North America
Windsor, CT 06095
Aug 02, 2004 Clear AS1160TP-PE provides adhesion and long-term holding power on wide range of substrates. Formulated for general purpose bonding, mounting, sealing, and product assembly, tape delivers positive aging and weathering properties, while offering resistance to solvents and moisture.