Adhesives & Sealants

Adhesives & Sealants, Chemicals & Chemical Processing

One Component, Neutral Curing Silicone Passes USP Class VI and ISO 10993-5 Tests

June 9, 2015

Specially formulated for medical device applications, Master Bond MasterSil 912Med is a room temperature vulcanizing silicone system for high performance bonding, sealing and coating. This system meets both USP biocompatibility and ISO cytotoxicity standards and resists a variety of sterilization techniques such as gamma radiation, EtO and some types of liquid sterilants. This one part system has... Read More

Adhesives & Sealants

Conductive Adhesive suits general assembly applications.

June 3, 2015

Designed to cure in 24 hours at room temperature or rapidly at elevated temperatures, 2-part EMS 618-15 Conductive Adhesive has 10:1 mix ratio and is available in 2-syringe packaging system for use with static mix heads. Product forms high strength, high reliability conductive interconnects in circuit assembly applications. Read More

Adhesives & Sealants

Pipe Thread Sealant produces leak-proof seal.

June 3, 2015

Available in 8 oz Brush-Top Bottle (Part No. SL35401), NLGI Grade 1 non-toxic, non-drying thread sealing compound does not contain lead, graphite, molybdenum disulfide, or clay fillers. White, non-hardening formula – blend of non-melting grease, PTFE particles, and other inert solid fillers – holds pressure to 8,000 psi, has usable range of -35 to +550°F, protects against chemicals, and... Read More

Adhesives & Sealants, Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Packaging Products & Equipment

Fabrico Medical to Exhibit Advanced Medical Fabrication Capabilities at the 2015 MD&M East Show

June 2, 2015

Rochester, NY - Fabrico Medical, a provider of custom manufacturing services and converter of thin flexible materials for the design-to-manufacture of medical devices and disposables, announces its participation in the 2015 MDM East Show, Booth #743, June 9-11, 2015, at Jacob K. Javits Convention Center, New York, NY. Fabrico Medical is also pleased announce that they will be exhibiting... Read More

Adhesives & Sealants, Mounting & Attaching Products

Flat Gaskets for Especially Demanding Applications in the Processing Industry

May 27, 2015

PLYMOUTH, Mich., – Increasing requirements, including rising surface pressures and high operating temperatures, have made flat gaskets indispensable in the chemical and pharmaceutical industries. However, fluctuating loads and changes in internal pressure pose major challenges to their performance. Freudenberg-NOK Sealing Technologies (Freudenberg-NOK) offers flat gaskets made of three... Read More

Adhesives & Sealants, Controls & Controllers, Green & Clean

Formulators - Aquaflex(TM) Granted Patent Protection for Waterproof Adhesive Technology

May 22, 2015

This patent covers the invention of a waterproof adhesive suited for a variety of applications including resilient flooring over concrete with unlimited moisture and pH levels. SANTA ANA, Calif. – Formulators is proud to announce the issuance of patent protection for its waterproof adhesive technology marketed as the Aquaflex™ moisture mitigation system. The patent for invention numbered... Read More

Adhesives & Sealants

Achieve Better Process Controls with Light-Cure Technology New White Paper Explains How

May 22, 2015

Torrington, Connecticut – Dymax Corporation's new white paper explains how light-curable materials in the manufacturing process actually allow for better process controls than other adhesive options, what the benefits of using them are, and what those process controls look like.  In manufacturing, process controls are used to ensure that products are made to the highest standard... Read More

Adhesives & Sealants

Conductive Adhesive suits solar modules applications.

May 21, 2015

Intended for stringing or shingling crystalline silicon and thin-film solar modules, EMS 561-147-2 electrically interconnects solar cells using ribbons or direct cell to cell contact. Stress absorbing capabilities withstand effects of thermal cycling, and other features include conductive stability to cell and ribbon metallization during damp heat exposure. Curing within seconds at 180°C or... Read More

Adhesives & Sealants

Epoxy Polysulfide System exhibits high thermal conductivity.

May 20, 2015

Along with 9-10 BTU•in/ft²•hr•Â°F thermal conductivity, EP21TPFL-1AO electrically insulative, 2-part system exhibits chemical resistance and offers 150%–200% elongation, 70-90 Shore A hardness, and 2:3 mix ratio by weight or volume. Black and white color coding facilitates mixing, and working life is 90–120 min at 75°F. Curing fully at ambient temperatures,... Read More

Adhesives & Sealants, Construction Equipment and Supplies

Window and Door/Fireblocking Foam Sealant has all-in-one formula.

May 19, 2015

While formulated to serve as low-pressure, expanding Window & Door/Insulating foam that is AAMA 812-10 compliant and will not bow window or door frames, Thermal Seal All-In-One Foam Sealant may also be used as UL-evaluated fireblocking foam for use in Type V non-rated 1 & 2 family residential construction. Closed cell content increases R-value as well as overall strength and resistance to... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Innovative, Light-Curable Dymax Adhesives and Curing Equipment to be Showcased at MD&M East

May 19, 2015

Torrington, Connecticut – Dymax Corporation, a leading supplier of adhesives to the disposable medical device industry, will exhibit in Booth #1657 at MDM East, scheduled to take place June 9-11, 2015, at the Jacob Javits Center in New York.  With over 30 years of direct participation, Dymax continues to provide medical device manufacturers with innovative adhesive products and assembly... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Silicone Adhesive Gel supports wound care.

May 19, 2015

Free from organic plasticizers and stabilizers, SILPURAN® 2117 is formulated to provide optimized tack in direct skin applications and where hypo-allergenic skin adhesion is crucial. Two-part A/B component adhesive is chemically inert, heat-resistant, and remains flexible at temperature extremes from -50 to +200°C. Waterproof and breathable, dressings made using soft silicone... Read More

Adhesives & Sealants, Paints & Coatings

Maersk and Valspar Complete Waterborne Conversion at Southern China Facility

May 19, 2015

MINNEAPOLIS, – After extensive line trials, Maersk Container Industry's factory in Dongguan has begun full production of dry containers coated with Valspar Aquaguard®, a zinc-free waterborne coating solution that provides industry-leading protection against corrosion. Maersk and Valspar began trial production in 2014 at this facility in southern China, one of the largest container... Read More

Adhesives & Sealants, Paints & Coatings

Pumpcoat's Application for Protective High Temperature Coating on Chemical Manufacturing Parts

May 14, 2015

Pumpcoat received a call recently from one of its customers, a prominent chemical manufacturing company near Boston. This company makes specialty and performance chemicals that are used as ingredients for many other manufacturing processes.  Carbon black, which is used in tire manufacturing and industrial rubber products, Aerogel which can be found in energy-efficient building components and... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Bluestar Silicones to Present at Tape Summit 2015

May 13, 2015

EAST BRUNSWICK, N.J. – Bluestar Silicones, a global leader in integrated silicone manufacturing, will exhibit and present at the Pressure Sensitive Tape Council (PSTC) Tape Summit 2015 May 11-15 in Baltimore, Md. The industry-focused event provides tape professionals opportunities to build their pressure sensitive adhesive (PSA) knowledge base. On May 14 at the event, Sebastien Marrot,... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Paints & Coatings

Chicago's Intrinsic Schools Showcase Distinctive, Patterned Façade Finished in Valspar's Fluropon Coatings

May 13, 2015

Chicago's Intrinsic Schools showcase distinctive, patterned facade finished in Valspar's Fluropon coatings; Greg Folkins Photography Opened for the 2014-15 academic year on Chicago’s Northwest Side, Intrinsic Schools’ new 58,000-square-foot Belmont Campus transforms a former lumberyard into a contemporary educational facility designed by Wheeler Kearns Architects (WKA) specifically... Read More

Adhesives & Sealants

Conductive Adhesive features low-temperature cure.

May 7, 2015

Designed for die attach and general circuit assembly applications, CA-180 cures in 30 min at 80°C, 3 min at 100°C or 10 sec at 150°C with electrical conductivity of 4 x 10-5 ohm-cm. This low-temperature cure conductive adhesive has 48 hr work life and 12,000 cP viscosity at 5 rpm for facilitated needle dispensing or application by pin transfer. Applications... Read More

Adhesives & Sealants

Extreme Grip Adhesive eliminates need for nails and screws.

May 6, 2015

Suitable for vertical applications, SikaBond® Ultimate Grab bonds to variety of construction substrates, including bricks, glass, metal, concrete, wood, and ceramics. One-component, moisture-cure, instant grab, polyurethane adhesive was developed with Sika's elastic technology, allowing maximum bond flexibility and recovery for long term durable bond. Product is packaged in 10.1 oz... Read More

Adhesives & Sealants, Paints & Coatings

Epoxy Coating suits applications above or below water.

May 4, 2015

Based on blend of liquid epoxy polymer and aliphatic polyamine curing agents, KALCOAT™ 560 can displace water from wet surfaces to make permanent bond. High build 100% solids epoxy coating is solvent-free and incorporates Kevlar® microfibers for reinforcement and viscosity management for high application rates. KALCOAT 560 can be used as anti-corrosive coating, repair compound, fairing... Read More

Adhesives & Sealants

UV Cure Adhesive suits circuit assembly applications.

April 27, 2015

Designed to cure rapidly when exposed to high-intensity UV light, 535-11M-7 Epoxy is suitable for lens bonding in camera modules, chip encapsulation in smart cards, and variety of general bonding applications in photonics assembly. Flexible, high-strength epoxy adhesive is non-conductive, low-outgassing, and does not contain antimony. Read More