Adhesives & Sealants

Adhesives & Sealants, Labels Tags Signage & Equipment, Material Handling & Storage

All Appli-Tec Products Meet OSHA's GHS Labeling - SDS Guidelines

January 18, 2016

OSHA's updated Hazard Communication Standard (HCS) 29 CFR 1910.1200 requires chemical manufacturers, importers and distributors to label all containers of hazardous chemicals and to supply properly formatted Safety Data Sheets (SDS) – for the smallest of syringes to large drums. We're pleased to announce that Appli-Tec has been in compliance with the new Globally Harmonized System (GHS)... Read More

Adhesives & Sealants

Cyanoacrylate (Instant) Adhesive targets automotive industry.

January 18, 2016

Formulated to dispense cleanly from automated valves, Aron Alpha 203TX-1Y luminescent-infused thixotropic gel cyanoacrylate bonds within 10 sec (neoprene to steel) and fluoresces bright neon green under black light. Latter allows vision system to detect and verify adhesive was applied to proper location on automotive part. Properties include viscosity of 1,500 cps, tensile strength of 360... Read More

Adhesives & Sealants, Health, Medical, & Dental Supplies and Equipment, Test & Measuring Instruments

Marian Inc. to Exhibit at MD&M West

January 14, 2016

INDIANAPOLIS, IN "This will be Marian’s second consecutive year exhibiting at MD and M West," says Bill Witchger, CEO of Marian. "We recognize our ability to connect with leading companies in the medical industry and strive to continue building on those relationships while creating new connections at MDM West 2016." Marian plans to showcase a variety of medical solutions that visitors can... Read More

Adhesives & Sealants

One-Component Epoxy Adhesive meets NASA outgassing specifications.

January 14, 2016

Applied in bond lines as thin as 10–15 microns, Master Bond Supreme 18TC contains thermally conductive fillers. This smooth paste system offers thermal resistance of 5–7 x 10-6 K•m²/W and thermal conductivity of 22–25 BTU•in/ft²•hr•Â°F. Able to maintain bond strength even when exposed to hostile environmental conditions, product bonds to diverse substrates... Read More

Adhesives & Sealants, Green & Clean

Resilient Flooring Adhesives feature eco-friendly formula.

January 8, 2016

Featuring low odor and zero VOCs, Eco-5900 MegaBond and Eco-5700 StrongBond are professional grade, green pressure-sensitive adhesives that offer high moisture resistance up to 8 lb CC/90% RH. Eco-5900 MegaBond is specially formulated to help minimize vinyl plank shrinkage. With roll on or trowel application, both can be used for permanent (wet-set) or releasable (dry-set) installation... Read More

Adhesives & Sealants

Toughened, Room Temperature Curing Epoxy Offers A Long Working Life

December 16, 2015

Developed for high tech bonding and sealing applications, Master Bond Supreme 11HTLP is a two part epoxy that is often selected for the aerospace, electronics and specialty OEM industries. It combines user friendly processing with a high physical strength profile. Supreme 11HTLP is formulated to have impressive toughness, which imparts high bond strength of over 3,200 psi and 20 pli, respectively... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Thermally Conductive, Electrically Insulative Two Part Silicone Meets NASA Low Outgassing Specifications

November 25, 2015

Master Bond MasterSil 972TC-LO passes the rigorous requirements for low outgassing per ASTM E595 specifications. It is particularly well suited for use in vacuum environments as well as applications in the aerospace, electronic, opto-electronic and specialty OEM industries. This two part silicone system offers convenient handling for bonding, sealing, coating and potting. MasterSil 972TC-LO is an... Read More

Adhesives & Sealants, Materials & Material Processing

YINCAE Advanced Materials Wins Global Technology Award at Productronica for World's First Solder Joint Encapsulant

November 23, 2015

Albany, NY – YINCAE Advanced Materials, LLC is proud to announce that our company was awarded the 2015 Global Technology Award in the adhesives, coatings, and encapsulants category! This ceremony took place on Tuesday, November 10th at the Productronica Global Exhibition in Munich, Germany. YINCAE Solder Joint Encapsulant was recognized as one of the products that made the greatest impact on... Read More

Adhesives & Sealants, Materials & Material Processing

Henkel Selected as Morey Corporation's Primary Solder and Adhesive Provider

November 20, 2015

Expanded relationship provides mutual business opportunities Building on a business relationship that spans more than three decades, Henkel Adhesive Technologies announces that The Morey Corporation (Morey) has named the company its primary partner for supplying solder and adhesive materials for the production of advanced electronic technology. Located in suburban Chicago, Morey utilizes more... Read More

Adhesives & Sealants

One Component Dual Cure Epoxy Meets USP Class VI and ISO 10993-5 Specifications

November 4, 2015

Master Bond UV15DC80Med offers a unique dual curing mechanism which employs UV light followed by heat to complete the polymerization. This allows for curing areas on parts that do not allow UV light curing because of "shadowing" issues. This kind of UV system is highly desirable because it allows for rapid fixturing with completion of the cure accomplished by adding heat. Formulated for demanding... Read More

Adhesives & Sealants, Materials & Material Processing

Bring The Heat! A Thermal Month with 3M Wrap-Up

November 4, 2015

This week officially wraps up our Thermal Management month with 3M. Throughout the last several weeks, we have focused on how important Thermal Management is in the development of various electronic devices that need to control the amount of heat that is being produced by them.  As the demands on electrical components increase, 3M offers insulating and protecting products that are performance... Read More

Adhesives & Sealants, Chemicals & Chemical Processing

Multi-purpose Adhesive/Sealant features clear appearance.

November 2, 2015

Based on silane terminated polymer technology, Sikaflex® Crystal Clear is suited for interior and exterior jobs. Single-component, solvent-free adhesive and sealant will adhere to most construction materials and surfaces, including metals, plastics, glass, tile, concrete, drywall, plywood, enamel, and painted surfaces. Product can be over painted after full cure and is suited for any... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Green & Clean, Materials & Material Processing, Paints & Coatings

Michelman Featuring Low/No-VOC, Water-Based Binders and Surface Additives at Western Coatings Symposium 2015

October 29, 2015

CINCINNATI, OH  – Michelman, a global developer and manufacturer of water-based binders and surface additives, will be featuring a variety of innovative new solutions at the Western Coatings Symposium being held October 25-28, 2015 in Las Vegas. Exhibiting at Table #300, Michelman will showcase its capabilities and product development prowess with new water-based binder and surface... Read More

Adhesives & Sealants, Chemicals & Chemical Processing, Materials & Material Processing, Services

Dow to Showcase New Innovations at 2015 Western Coatings Symposium

October 28, 2015

Industry experts from Dow introduce new technologies and present broad portfolio of architectural and industrial coatings technology at the 2015 Western Coatings Symposium PHILADELPHIA – Dow Coating Materials (DCM) and Dow Microbial Control (DMC), business units of The Dow Chemical Company (NYSE: DOW), will discuss and showcase new and time-tested innovations in Las Vegas, Nevada Oct. 25-28 at... Read More

Adhesives & Sealants

Material Highlight: 3M Thermally Conductive Adhesive Transfer Tape

October 23, 2015

3M Thermal Adhesive Tapes provide excellent long-term reliability, electrical insulation and flame retardant performance. 3M's highest mechanical strength, thermally conductive tapes feature excellent adhesion properties, improved surface wet out, and excellent shock performance. There are four types of 3M Thermally Conductive Adhesive Transfer Tapes including: 8805 (5 mil), 8810 (10 mil),... Read More

Adhesives & Sealants

Light-Curable Adhesive targets medical devices.

October 22, 2015

Formulated with Encompass™ technology that combines Dymax See-Cure color change and Ultra-Red™ fluorescing technologies with LED-curing capabilities, 215-CTH-UR-SC Catheter Adhesive provides rapid bonding of variety of substrates, including Nylon 12 and PEBA. Adhesive offers easy cure confirmation and post-cure bond-line inspection. Blue color transitions to colorless when sufficient... Read More

Adhesives & Sealants

High Temperature Resistant, One Component Epoxy Cures at 200-220°F

October 14, 2015

Formulated for potting, encapsulation, bonding and sealing applications, Master Bond EP17HT-100 is a single part epoxy system that is designed to cure in 60-90 minutes at 200-220°F. Cures can be accelerated at higher temperatures. This low heat curing schedule is useful in bonding applications involving temperature sensitive substrates in the aerospace, electronic, optical and other high-tech... Read More

Adhesives & Sealants, Controls & Controllers, Material Handling & Storage

Adhesive and Dispenser are optimized for medical applications.

October 12, 2015

With elongations over 100% and fixture speeds under 10 sec, Henkel LOCTITE® 4902 flexible cyanoacrylate adhesive is ISO 10993 Biocompatible and suited for plastic, rubber, and metal bonding applications in medical items. Digital dispenser and valve controller, Fisnar DC200, is designed for facilitated dispensing of viscous materials. Internal air solenoid suits applications requiring... Read More

Adhesives & Sealants

Industrial Pull Tape provides optimized print legibility.

September 29, 2015

Designed to assist with installation of wiring and cable within conduit structures, Vis™ Tape with MPrint™ technology features long-lasting print durability and legibility, print length accuracy, and soft feel to make pulls of fiber optic, copper, and coaxial cable easier and precise. Non-abrasive coating helps to prevent conduit damage during cable installation. Available in reel lengths... Read More