Georg Fischer Piping Systems
Tustin, CA 92780
Mar 12, 2007 Suited for 300 mm semiconductor manufacturing plants and applications in chemical and microelectronics markets, SYGEF® PVDF Exhaust Piping System enables safe conveyance of aggressive exhaust gases and fumes. It includes pipe sizes from 2-½ to 16 in., and various fittings, reducers, fixed flanges, gaskets, seals, and throttle valves. Other features include UV-resistance, operating temperature range from -4 to 284°F, and vacuum rating of 0.218 psi, 6 in. wc.

Air Science USA
Fort Myers, FL 33906
Feb 02, 2007 Designed to promote operator protection, PURAIR 5 series has ductless design that permits unit to be positioned over sink or benchtop apparatus. Face velocity of 100 fpm ensures containment of fumes and particulates for operator protection, and alarm alerts operator when airflow falls to unacceptable level. While main filter can be chosen from 14 different types of carbon, HEPA filters for particulate filtration are also available.

Rockwell Automation
Milwaukee, WI 53204
Jan 25, 2007 Suited for commercial fan and pump applications, PowerFlex 400 Drives feature integral RS485 communications interface that supports standard building automation networks, including Modbus RTU, N2, and Siemens P1-FLN. Embedded PID controller adjusts output frequency to maintain process variable, while 3 programmable skip frequencies and bands prevent drive from running continuously at resonant speeds. Disconnect and contactor bypass packages facilitate installation and startup.

UltraViolet Devices, Inc.
Valencia, CA 91355
Jan 19, 2007 Operating from 120-277 Vac, Full Output V-Ray(TM) FO delivers optimum level of UV for larger multi-row HVAC systems common to fan coils, ceiling mount unit ventilators, roof top units, and heat pumps. Providing 3 lamp lengths from 21-61 in., unit eliminates need to clean coil fins in hard-to-reach areas, while delivering continuous irradiation of coil surfaces. V-Ray(TM) FO is suited for schools, nurseries, and healthcare facilities where small systems exhibit microbial problems.

Aerzen USA Corp.
Coatesville, PA 19320
Dec 12, 2006 Designed for minimal noise output, Delta Blower Generation 5 has no absorption material in base/discharge silencer and ventilates Aerzen acoustic hood via mechanical fan installed on blower shaft. Design permits side-by-side installation, and oil level can be viewed and checked from outside while unit is operating. Offering optimal accessibility for maintenance, series includes 9 sizes for intake volume flows from 35-2,100 icfm and pressures to 15 psig.

Farr Air Pollution Control
Jonesboro, AR 72401
Oct 26, 2006 Suited for welding workshops and industrial settings, Farr Cart extracts moderate concentrations of smoke and light dust generated by intermittent processes such as welding and grinding, delivering 99+ efficiency on welding fume. Unit features injection-molded plastic construction, large rubber wheels, and slim design, offering mobility in tight spaces. Handles come with 10 ft flexible fume extraction arm and built-in halogen spotlight in hood.

GE Company GE Plastics
Pittsfield, MA 01201
May 24, 2006 Letting in natural light, Lexan Clear Storm Panels provide impact resistance 4 times that of ½ in. plywood, and are 30-50% lighter than metal panels traditionally used. Single panel can completely cover window or door, and can be left in place for entire hurricane season. Panels will not rust or corrode and have UV protection on both sides. They can be installed by directly mounting with hardware or affixing panel to h-header and f-tracks.

Greenheck
Schofield, WI 54476 0410
May 12, 2006 ETL listed to ANSI Z83.4 and CAN 3.7, Model DGK is direct gas-fired make-up air unit that features cast aluminum burners with SS mixing plates, Maxitrol electronic modulation burner control, and 25:1 turndown ratio. Manufactured for weather resistance, unit's housings and filtered weather hood are constructed of heavy gauge G90 galvanized steel. Airflow volumes range from 800-4,500 cfm with heating capacities up to 400,000 BTU/hr.

DuctSox
Dubuque, IA 52002
Mar 31, 2006 Flexible, polymer Models SG2 and SG3 are 2 and 3 in. diameter diffusers sewn into laser-cut orifices of Sedona-Xm anti-microbial fabric duct. Units do not attract condensation and produce throws of 45-72 ft and 48-108 ft, respectively, at normal static pressures ranging from 0.25-1.25 in. wg. Offered in white or black, diffusers are designed to match suspension attachment components.

Oil Skimmers, Inc.
Cleveland, OH 44133
Mar 17, 2006 Suited for tanks and sumps, Model 6V Vapor Hood is used in conjunction with Model 6V oil skimmer, and is fully enclosed with gasket to prevent VOCs from escaping into atmosphere during oil skimming process. Electric motor is protected from skimming area and VOCs, while built-in decanter provides water-free oil skimming. Although enclosed, hood enables users to access skimmer for inspection and maintenance.

HEMCO Corp.
Independence, MO 64056
Jan 27, 2006 UniFlow SE Fume Hood utilizes aerodynamic face opening with airfoil to provide uniform and constant volume airflow into fume chamber. VaraFlow baffle system directs airflow to exhaust outlet with minimum turbulence. Featuring one-piece, unitized composite fiberglass superstructure, hood is fire retardant and chemical resistant. Units are available in 48, 60, 72, and 96 in. width, and 32 in. depth x 59 in. height.

Modern Safety Techniques
Hicksville, OH 43526
Nov 09, 2005 Portable, continuous-use Respiratory Protectors(TM) provide clean, humidified air to workers, while allowing freedom of movement. Units convert carbon monoxide to carbon dioxide as well as remove other toxic gases from breathing air. Utilizing low temperature LT CAT(TM) catalyst, systems do not require desiccant dryers. Available in 10 and 50 scfm models, Respiratory Protectors are packaged in weatherproof enclosure and include carbon monoxide monitor.

Farr Air Pollution Control
Jonesboro, AR 72401
Oct 25, 2005 Modular Gold Series® Booth encloses work environment on 3 sides and creates cross draft in work area, pulling dust away from breathing zone and removing nuisance dust, fumes, and other particulates. Booth can be arranged to accommodate airflow requirements from 5,400-100,000 cfm and utilizes HemiPleat(TM) filter cartridge, which is rated 99.99% efficient on 0.5 micron particles. Self-contained unit comes with blowers, light fixtures, and controls.

Dresser Instruments, Dresser Measurement & Control, Dresser Inc.
Stratford, CT 06614-5145
Oct 17, 2005 Engineered to measure static or differential pressure, Ashcroft® CXLdp is available in ranges from 0/0.1-0/25.0 in. H₂O and in accuracies of ±0.8 and 0.4% FS. It includes high over-pressure capability, LED status light, and CE EMI/RFI immunity rating. Multiple mounting options allow unit to be mounted on DIN rail, conduit, or wall. With detachable terminal block electrical connector, transducer can be installed into panel without power interruption.

Air Science USA
Fort Myers, FL 33906
Oct 11, 2005 Portable and self-contained, Purair Ductless Fume Hoods protect lab personnel from harmful powders and chemical vapors, using HEPA filters and activated carbon filtration techniques, while offering 360° visibility. Series consists of 6 models with face velocity of 100 fpm and airflow from 145-440 cfm. Available in widths from 29.5-69 in., units are 27.5 in. deep and 47.5 in. in height.

Great Lakes Air Systems
Clawson, MI 48017
Jun 22, 2005 Featuring curtained design, RoboVent BinVac captures smoke, debris, and contaminants in air from parts that are still smoking after being welded, and returns clean air to plant. Unit removes airborne contaminants before they can settle on plant floors, walls, and machinery. Self-contained hood can be moved around plant without need to re-configure ductwork. Filter system requires minimal maintenance and filter changes.

Rite-Hite Aftermarket Corp.
Milwaukee, WI 53223
May 04, 2005 Universalâ„¢ GX-4000 Ventilation Panel promotes dock and plant airflow while preventing bugs or pests from entering facility. With no compromise to security, it can be retrofitted to existing 2 or 3 in. sectional doors and fits doors up to 18 ft 2 in. wide. Panel is made from extruded vinyl slats that surround steel interlocking screen unit. Made from stainless steel wire, screen can be constructed with .083 x .083 in. or .030 x .030 in. screen hole size.

Caterpillar, Inc.
Peoria, IL 61629
Apr 12, 2005 MorElectric System provides electrically powered heating, ventilating, and air-conditioning system, allowing all HVAC components to be removed from engine compartment. Electric power comes from 7,300 W generator that replaces alternator. When coupled with Auxiliary Power Unit, system provides driver with comfortable cab environment when main engine is off. Using Shore Power, truck is plugged into pedestal at truck stop, providing low emission idling solution.

Nederman, Inc.
Westland, MI 48185
Mar 21, 2005 Available in 7 or 10 ft lengths, Standard Extraction Arm includes flange type hood and main integrated wall bracket with hose connection bend designed for 180° rotation. Optional damper accessory is available.

Labconco Corp.
Kansas City, MO 64132 2696
Feb 18, 2005 Protector® Demonstration Hoods are light-duty fume hoods that provide procedural observation during educational demonstrations. Tempered safety glass front sash, sides, rear baffle, and top offer 360º visibility and provide fire, scratch, and corrosion resistance. Clean-Sweepâ„¢ air foil allows air to sweep work surface, while upper containment sash foil bleeds air into enclosure to direct contaminants away from operator’s breathing zone.