Continental Fan Mfg. Inc.    Buffalo, NY 14215
Jan 24, 2011 Featuring FRP airfoil axial impeller and belt drive design, FAIB Fans are suited for corrosive environments or contaminated air stream applications. Fan housing is constructed of UV inhibited Hetron 99 P polyester resin with Class I flame spread of 25 or less. Available in high and low pressure models, fans are equipped with 316 stainless steel shaft and hardware, EPDM double lip shaft seal, and TEFC industrial-duty motors.

Rittal Corporation    Urbana, OH 43078
Dec 17, 2010 When installed, TopTherm fan-and-filter units foster air throughput for improved ventilation in enclosures and housings as well as energy savings to 43%. Outputs range from 20-700 m³/h, and diagonal air outlet to outside promotes even distribution of air while avoiding hot spot formation. Along with choice of 24 Vdc or 115, 230, and 400 Vac 3-phase, 50/60 Hz supplies, features include tool-free assembly, flat design, and spring-type terminals.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Dec 07, 2010 Available in 9 sizes, TNC Cooling Fans are equipped with TEK backward curved airfoil impeller, which combines precision injection molding techniques with high-strength plastics. Fans utilize standard NEMA motors and can be connected to independent control system. Available with custom mounting arms, non-overloading TNC Series is suited for electronic cabinet cooling.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Nov 08, 2010 Offering vibration-free operation, DX Motorized Centrifugal Impeller combines backward curved airfoil wheel with DC external rotor motor. Unit comes in 24 and 48 Vdc models with capacities to 760 cfm and 0-10 Vdc or PWM motor control. Both motor and impeller are located directly in air stream, where impeller acts as rotating heat sink. Completely speed controllable, impeller is suitable for supply or exhaust applications, as well as applications where transient electrical noise is prohibited.

Meyda Tiffany    Yorkville, NY 13495
Nov 03, 2010 Measuring 44 in. wide and utilizing 50 W halogen MR16 lamps, Maplewood Fabric Chandel-Air(TM) is handcrafted with faux Maplewood border and natural beige cloth fabric covering faux alabaster diffuser on side panels. Built-in fan can pull hot air up and keep space cool in summer, and be reversed in winter to push down hot air and maintain warmth. Suited for residential and commercial applications, unit operates with optional 2-circuit remote control with 3-speed fan control and dimming capabilities.

Jaro Thermal    Boca Raton, FL 33487
Oct 22, 2010 Measuring 40 x 40 x 15 mm, AG4015 series features impeller capable of producing 21 cfm air flow when rotating at speeds to 15,000 rpm. Fan provides static pressure of 0.92 in. of water while maintaining minimal noise level for storage, networking, STB, and power applications. Available operating voltages are 5, 12, and 24 DC, and fan can be coupled with features such as frequency generator, rotation detection, and PWM speed control.

Bud Industries, Inc.    Willoughby, OH 44094
Oct 14, 2010 Supplied with digital temperature controller, 19 in. fan tray assembly features 6 fans that provide 540 cfm total cooling airflow whenever temperature exceeds setpoint. Tray measures 19 x 18.56 x 1.75 in., and temperature control is accurate to ±2°F. For installation, attach 4 rack mounting-brackets, position fan tray, plug it in, and set temperature. Design includes illuminated on/off switch, CE-listed fans with long-life sleeve bearings, and temperature sensor with 9 ft cable.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Oct 11, 2010 Available in diameters from 8-15 in. and capacities to 3,410 cfm, precision balanced CPB Blowers accommodate industrial and commercial air moving requirements. Cast aluminum radial bladed wheels suit exhaust systems where air is laden with dust/grit, and blowers may also be used to supply high-pressure air for cooling/conveying applications. Along with single- or 3-phase TEFC motors, blowers are offered with clockwise or counter-clockwise rotation and circular inlet/outlet collars.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Sep 06, 2010 Designed for quiet and accelerated heat dissipation, MNC fans utilize MF Mixed Flow Impeller featuring adjustable blade geometry. Nine sizes are available that produce airflows up to 20,000 cfm, all of which feature non-stall airflow properties and non-overloading absorbed power characteristics. Custom mounting arms and special designs are available, and standard NEMA motors enable fans to be connected to independent control systems.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Aug 10, 2010 Featuring heavy-duty welded steel panel and motor base, and TEFC industrial-duty motor, APW Panel Fan is available in diameters from 14-60 in. with capacities up to 60,000 cfm. Unit has factory set, adjustable-pitch airfoil axial impeller, constructed of spark-resistant, die-cast aluminum, for precise performance matching. Fan features baked polyester powder-coat paint finish and TEFC industrial duty motor.

Schaefer Ventilation Equipment, LLC    Sauk Rapids, MN 56379
Jul 20, 2010 Suitable for cooling personnel and equipment, Big Dog(TM) Ventilator can also be slowed down to move less air for winter de-stratification. Unit has 72 in. diameter, 3 hp, belt-drive, variable speed circulation fan fitted with 6 fully adjustable fiberglass air deflectors, allowing air stream to be aimed wherever it is needed. At full power, air speed at fan outlet is approximately 1,500 fpm with total airflow of 50,000 cfm and efficiency of greater than 20 cfm/W.

Rite-Hite    Milwaukee, WI 53224
Jul 19, 2010 Combining High-Volume/Low-Speed (HVLS) fan technology with compact design, Revolution® SP Fan circulates air volumes up to 50 ft from its center in all directions for optimal heating/cooling of areas encompassing 7,800 ft². Mounting heights range from 10-30 ft from finished floor to bottom of fan blade. Engineered with rotationally balanced blade/hub connection, 4-blade fan comes in 8, 10, and 12 ft dia and offers controls for adjusting fan speed or operating unit in reverse.

Greenheck    Schofield, WI 54476 0410
Jul 13, 2010 Made of single-width centrifugal blower with backward-curved wheel, model BCSW-FRP fans are available in both belt and direct drive configurations with performance capabilities up to 150,000 cfm and 14 in. w.g. They are suited for highly corrosive airstream applications such as wastewater treatment plants, pulp/paper processing, and metal finishing. Complying with ASTM D4167 and C582 standards, fans are AMCA Spark A Resistant and bear AMCA Seal for air performance.

FANQUIP    Singleton DC   Australia
Jul 07, 2010 Heavy-duty, fixed-head air circulator cooling fan creates air flow in specific areas of factory, plant, office, or laboratory where it would otherwise be difficult to direct fresh air. Operating on voltages of 1-phase 240 V or 3-phase 415 V, unit features motor power ranges from 0.20-0.30 kW and allows free air volumes to be moved at speeds from 3,000-17,000 Lps. Lightweight fan has 2 speeds and includes 3-blade impellers, and can be wall-mounted or operated from steel pedestal.

Jaro Thermal    Boca Raton, FL 33487
Jul 02, 2010 Ultra-thin, micro-sized fan Super-Flow Micro delivers output of .57 cfm and comes with IP 57 water resistance rating. Designed to provide min 30,000 hr of life, fan is suited for various space-limited applications, including PDA, MID, smartphone, CCTV, GPS, mask and goggle, pocket projector, micro fuel cell, and air sensing usages.

FANQUIP    Singleton DC   Australia
Jul 02, 2010 Designed for applications where contaminated airborne particles must be removed to create clean/safe working environment, Negative Air Fan comes complete with safety dust load monitoring system. Unit is configured with HEPA filter and tested to AS 1324 to achieve min efficiency of 99.99%. Operating on 240 V, 10 A, and 3-pin plug electrical system, unit offers 2-stage alarm that notifies operator when filter is dirty and immobilizes unit once filter drops below its rated capacity.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Jul 01, 2010 AMI precision-balanced fans, suited to limited-space applications, offer vibration-free operation thanks in part to coupling of motor and impeller, which are located directly in air stream. Impeller acts as rotating heat sink, and fan speed is completely controllable. Available in sizes from 170-300 mm and capacities from 300-1,700 cfm, fans are offered with standard or reverse flow configurations as well as in open blade and ring or panel designs.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Jun 15, 2010 Built for aerodynamic efficiency performance, AIB Belt Drive Tubeaxial Fan delivers airflow capacities to 54,000 cfm and features heavy-duty welded steel housing and angle ring flanges. Other features include spark-resistant, cast aluminum airfoil axial impeller; factory set, adjustable pitch blades; and TEFC industrial-duty motor located outside of air stream. Offered in diameters from 12-60 in., fan supports mounting in ductwork in any position.

EBM - Papst, Inc.    Farmington, CT 06034
Jun 15, 2010 Model 3200JH3 Tubeaxial Fan operates at 135 cfm in free air and features fan blade with sickle shape and winglets. Equipped with intelligent electronics to achieve maximum efficiency, fan is offered in 24 and 48 Vdc variations and exhibits low noise operation even under high back pressures. Ball bearing cooling system extends service life.

EBM - Papst, Inc.    Farmington, CT 06034
Jun 15, 2010 Models 4100NH3 and 4100NH6, constructed with air intake over struts, handle dense system requirements, such in AdvancedTCA chassis. At free air (0 static pressure), 4114NH3 provides 182 cfm at 6,000 rpm, while 4114NH6 provides 259 cfm at 8,400 rpm. Model 4114NH6 also offers performance to 200 cfm at 1 in. of H2O. Both fans are offered in 12 (H3-H5), 24, and 48 Vdc variations.