HVAC, Mechanical Components & Assemblies

Centrifugal Impeller suits limited space applications.

September 21, 2015

Available in single or 3-phase voltages, TMK Motorized AC Impeller is completely speed controllable. Impeller and dual frequency 50/60 Hz motor are located directly in airstream, where impeller acts as rotating heat sink with optimized heat dissipation and efficient motor cooling. Housed version TMK-H eases installation and minimizes assembly time. Both are equipped with BC airfoil wheel and provide capacities to 5,060 cfm. Matching capacitors and inlet cones are available. Read More

HVAC, Optics & Photonics

Cable Blowing Machine installs micro fiber cable.

June 24, 2015

Engineered to install micro fiber cable into pre-installed 0.157–0.708 in. diameter microduct, Whisper Micro Cable Blower can place 0.078–0.334 in. diameter cable at speeds up to 260 fpm. Product features integral air valve, pressure gauge, and electronic monitoring system that provides digital read-outs of speed and distance. Operated by single person, portable Whisper is suited for both interior and exterior fiber cable placement applications. Read More

Mechanical Components & Assemblies, HVAC

Motorized Centrifugal Blower delivers airflow of 1,900 cfm.

May 26, 2015

Measuring 15.9 x 6.4 in., OAB400 Series offers max static pressure value of 5.4 in. H2O and meets UL Class B Insulation requirements. Unit features all-metal impeller, sealed dual ball bearing design, and diecast aluminum frame. Utilizing backward curved blades, motorized impeller is designed for electronic cabinets, air filtration, networking, and ventilation systems. OAB400 Series has current rating of 1.26 A, power rating of 387 W, and operating temperature of -40 to +80°C. Read More


Multi-Speed Blowers utilize electronically commutated motor.

March 20, 2015

Featuring weatherized, direct drive, non-explosion-proof design, Intelli-Sense Multi-Speed Blowers are controlled by 2- or 3-position switch. Units can exhaust fume hoods from 3–7 ft in width at full sash open height and 100 fpm face velocity. Phenolic coated steel models are recommended for low to moderately corrosive applications, while fiberglass units suit highly corrosive environments. For extremely corrosive atmospheres produced by high order oxidizers, PVC models are available. Read More

HVAC, Laboratory and Research Supplies & Equipment

Filtered Ductless Fume Hood helps laboratories conserve energy.

March 6, 2015

Designed for laboratories that are difficult to vent due to location, Protector® Echo™ operates independent of building's exhaust system and without removing tempered air from laboratory. Neutrodine™ filters handle jobs of 6+ other kinds of carbon filters, and sensor package, backup filters, and optional g-Guard® remote monitoring software work with range of chemicals. In case of chemical breakthrough or loss of airflow, alarm sounds and communication system alerts designated email address. Read More


Rotary Blowers feature compact, integrated design.

February 18, 2015

Delivering 0.5–74 m³/min at up to 1,000 mbar (g), or 500 mbar (partial vacuum), BB69C through FB791C Rotary Blowers are supplied connection-ready with integrated mains power supply equipment and monitoring, including all sensors and star-delta starter, or with frequency converter to enable flexible speed control. CE and EMC certified packages are suited for pneumatic conveying of powdered goods, water treatment, or wherever generation of blowing air is required from compact unit. Read More

HVAC, Materials & Material Processing

Long Static Eliminator neutralizes and cleans wide surfaces.

January 16, 2015

Available in one-piece construction with lengths from 60–108 in., Long Super Ion Air Knives neutralize static electricity while blowing away dust and particulates from wide webs and other surfaces. Laminar airstream, full of static eliminating ions, ifs effective up to 20 ft away, and materials off construction include aluminum as well as 303 and 316 stainless steel. Operating effectively down to 5 psig, solid state product has adjustable and shockless design. Read More

HVAC, Thermal & Heating Equipment

Heat Exchanger Assembly dissipates over 10 kW of heat.

November 25, 2014

Designed to mount in standard 19 in. electronic equipment racks, Liquid Cooling Heat Exchanger Assembly pairs copper nickel heat exchanger cores with Rotron MAXIAX vaneaxial blowers to dissipate heat from electronic rack to water supply. Assembly is enclosed in ruggedized 6U aluminum chassis for harsh environments. Models with power inverters allow use of 400 Hz AC or DC fans and blowers for increased volumetric flow and pressure while maintaining compact size. Read More

HVAC, Mechanical Components & Assemblies

Centrifugal Impeller utilizes electronically commutated motor.

November 4, 2014

Offering capacities to 1,139 cfm, ErP and RoHs compliant EC Motorized Impellers combine backward curved impeller and electronically commutated (EC) external rotor motor for optimized energy conservation and performance in such air-moving applications as cooling of motor controls, electronics, power converter cabinets, and modular A/Cs. These precision balanced air-moving devices operate from 208–277 V, 50/60 Hz single-phase input and are available with 1–10 Vdc or PWM motor control.
Read More


Pressure Blowers come in compact sizes and with multiple options.

October 28, 2014

Featuring steel wheel suitable for clean air and various material handling applications, Compact Pressure Blower series handles airstream temperatures to 600°F, flows up to 4,000 cfm, and static pressures to 23 in. WG. Optional stainless steel/special alloy construction is available for corrosive applications. There are 7 discharge positions available with variable widths/diameters, and users can choose between models with 4 outlet and 6 inlet sizes. Read More


Inline Mixed Flow Fan suits demand-based lab exhaust applications.

June 24, 2014

Available in belt or direct drive configurations with capacities from 1,500–38,000 cfm and up to 8 in. wg, Vektor®-MS utilizes mixed flow impeller technology and reduces fan energy in laboratory exhaust applications. Sure-Aire™ noninvasive flow monitoring responds to changes in airflow and static pressure in occupied space, causing fan's operation to adjust based on demand, while variable geometry discharge nozzle modulates to maintain constant discharge velocity at fan exit.
Read More

HVAC, Mechanical Power Transmission

Miniaturized Motors, Fans, Blowers suit compact devices.

June 13, 2014

Micro Motors, featuring brushless commutation technology, are designed for minimal power consumption and EMI. Delivering axial air-gap cooling, Micro Blowers serve such applications as portable medical devices, LED lighting, IP cameras, GPS devices, and solar and wind energy devices. Micro Fans and Coolers effectively manage heat generation for applications with limited space and constrained power budgets. Available to match specific needs, all products are RoHS compliant. Read More

HVAC, Cleaning Products & Equipment

Personnel De-Duster produces safe 2.75 psig air.

June 10, 2014

Suitable for positioning at exit/entry points of any manufacturing and production facility, blower-powered JetBlack delivers high volume (500 fps), low pressure (2.75 psig) air that can be used even against exposed skin. Standard hose length with wall-mounted unit is 56 in. for full body de-dusting, and noise level is lower than 78 dbA. Product includes touch button for pre-timed on/off operation. Read More

HVAC, Plant Furnishings & Accessories

Air Curtains protect doors up to 10 ft wide.

May 28, 2014

Designed for energy savings and flying insect control, EZN and KZN Series are available in 9 widths ranging from 3–10 feet, which eliminates mismatches of combining smaller sizes to create longer air curtain. Each ANSI/NSF 37-certified model uses E-Zone/K-Zone 8 ½ x 8 in. cabinet design. One-piece, single-speed air curtains feature multiple air directional vanes constructed of heavy-gauge aluminum that assure proper deflection and airflow to outdoor threshold. Read More

HVAC, Laboratory and Research Supplies & Equipment

Ionzing Air Beam blows away dirt and static from distance.

April 29, 2014

Without any moving parts, Nex Flow™ Ion Blaster Beam™ removes static charge from charged surface and can remove static-free dust up to 15 ft away. Compact design allows use in hard-to-reach areas or confined spaces, while air volume and velocity are infinitely adjustable using pressure regulator to address light- to heavy-duty applications. Use of air amplifier maximizes ionized airflow, with large volume entrained, while minimizing compressed air use (10 psig typ). Read More

HVAC, Mechanical Power Transmission

Brushless Blowers include full-wave electronic controller.

April 14, 2014

Powered by 1.7 in. brushless 12 or 24 Vdc motor, MICROjammer® Series is available in sizes from 3.0–5.1 in., each providing unique aerodynamic operating characteristics for custom fit. Variable-speed blowers deliver up to 50 in. w.c. of static pressure and achieve airflow levels of 26 cfm. Allowing virtually 0-100% total speed variation, full-wave commutating electronics optimize blowers by providing protection features, functional options such as tachometer input, and customization potential. Read More


Pressure Blower features backward inclined wheel.

March 5, 2014

With its backward inclined wheel, Backward Curved (BC) Pressure Blower is capable of handling air flows to 80,000 cfm, pressures to 110 in. wg, and temperatures to 800°F (180º F for Arrangement 4). Blade diameters range form 24–73 in., and there are 7 discharge positions available. Capable of handling both clean air and light particulate-laden/moist air and gas streams, fan also features flanged round discharge and optional inlet box. Split housing standard on Size 73 facilitates shipping. Read More

HVAC, Machinery & Machining Tools, Materials & Material Processing

Air Rinsing/Static Removal System removes dust and particulates.

October 18, 2013

Offering alternative to ionized compressed air and water rinsing systems, Ionized Air System cleans and removes static from plastics, cans, bottles, and other product surfaces. Air is accelerated through 15,000 rpm centrifugal blower, filtered and ionized, and directed onto or into target product via targeted nozzles. By neutralizing static charge that causes dirt to cling to products, ionized air releases dirt and particulates and leaves clean surface. Read More

HVAC, Mechanical Components & Assemblies, Controls & Controllers

KRD Radial Blade Blower has compact, efficient design.

July 11, 2013

Offered in capacities to 3,307 cfm, KRD Radial Blade Blowers feature heavy-duty welded 16-gauge steel housing and motor base. Single- or 3-phase TEFC motors are available, and product can also be supplied without motor. Dynamically balanced, self-cleaning, cast aluminum wheels are suited for exhaust systems where air is laden with dirt, lint, or foreign material. Other features include polyester powder coat finish and standard CW bottom horizontal discharge (rotatable to 8 positions). Read More


Cast Aluminum Blowers offer capacities to 1,550 cfm.

April 22, 2013

Available in 4, 6, or 8 in. diameters, CAB Blowers feature cast aluminum housing, heavy-duty steel base, and forward curved steel wheel. Spark-resistant units are powered by single or 3-phase TEFC motors and provide CW rotation; rotatable to 4 positions. Suitable for 0–160°F temperatures, blowers support smoke and fume removal, spot cooling, and electronic equipment cooling. Read More