Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 18, 2011 Measuring 0.76 x 0.76 mm, Model TMP103 draws max of 1 µA in shutdown mode and 3 µA in active mode to extend battery life in portable electronics such as smartphones, tablets, and laptops. Unit is capable of reading temperatures to 1°C resolution and provides ±1°C accuracy from -10 to +100°C. Global read/write functionality minimizes software development and processor loading. Using single command, 8 sensor devices mounted on board can simultaneously identify and monitor hotspots.

Palmer Wahl    Asheville, NC 28804
May 12, 2011 Available to meet variety of application requirements, RTD and Thermocouple Sensor Assemblies offer sensor heads in aluminum, stainless steel, cast iron, polypropylene, and explosionproof models. Users can select from terminal blocks or transmitters for data transfer; grounded or ungrounded elements in Types J, K, or T; and thin film or wire wound type RTDs in Class A or Class B when higher accuracy is necessary.

Emerson Process Management    Pleasanton, CA 94566
May 06, 2011 Designed to measure pressure and temperature behind casing in subsea production wells online and in real-time, Roxar Downhole Wireless PT Sensor System - Annulus B consists of Integrated Downhole Network system, Downhole Network Controller Card, wireless reader, wireless PT Transponder and antennae, and transponder and reader carrier. System is qualified to last minimum of 20 years at temperatures up to 302°F and pressures up to 10,000 psi, with accuracy of ±2.5 psi and ±0.18°F.

Process Sensors Corp    Milford, MA 01757
May 04, 2011 Pyrometer Series Metis MB35 utilizes lead selenide detector with filtered spectral response of 2-5 µm. Unit has 3 msec response time, and control features and functions, along with pyrometer settings, are configured via PC using PSCWin Software. Features include adjustable focus; RS232, RS485, or Profibus digital communication interfaces; and analog 4-20 mA output. Applications include CO₂ laser heating, composites, and metal surfaces above 35°C.

Calex Electronics Limited    Bedfordshire   United Kingdom
Apr 25, 2011 Able to detect IR radiation at wavelengths from 2.0-2.4 microns, PyroUSB 2.2 utilize short-wavelength measurement method. Model PU151LT2.2 is designed for measuring targets from 45 to 300°C, and other models cover 250 to 1,000°C and 450 to 2,000°C ranges. Supporting direct connection to PC via included USB cable, non-contact sensors provide selectable 0-20 mA or 4-20 mA output linear with temperature. Other features include CalexSoft software, alarms, and OPC Server interface.

FREE2MOVE AB    HALMSTAD S-302 48  Sweden
Apr 25, 2011 Ison(TM) sensors, part of FS800 family of sensors, store up to 10,000 log-points with simultaneous humidity and temperature measurements. Log-intervals and alert threshold values are configurable, while units are self-calibrating and maintenance-free. Logged sensor data can be uploaded to USB-, Wi-Fi-, or LAN-compliant reading devices at range of up to 300 ft in free air. Products can used to monitor building structures, machinery, and sensitive goods.

LumaSense Technologies, Inc.    Santa Clara, CA 95054
Apr 05, 2011 IMPAC IS 320 and IGA 320 multi-purpose IR temperature sensors have compact, stainless steel design, and offer non-contact measurements in applications such as metal, ceramic, or graphite processing plants. Built-in LED pilot lights let users align and focus instrument to measurement target. They are EMI safe, include optics to measure areas or objects as small as 1.2 mm, and offer 2 msec response rate. Digital and analog outputs and exchangeable cable connections are included.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 30, 2011 Intended for PC-based, non-contact temperature monitoring, IR-USB series features IR sensor/signal conditioner installation with direct USB connection. Included software converts PC into temperature meter, chart recorder, or data logger. Taking measurements from 0 to +1,000°F, sensor offers adjustable emissivity from 0.10-1.0. Typical applications include jobs where object to be measured is moving, is surrounded by EM field, or is contained in vacuum or other controlled atmosphere.

Atmel Corporation    San Jose, CA 95131
Mar 09, 2011 With integrated non-volatile registers and 2, 4, or 8 Kb of Serial EEPROM memory, AT30TS750 Series allows for user-configured settings to be retained across power cycles. Units feature ±0.5°C accuracy, user-selectable 9-12 bit resolution, and temperature range of -40 to +125°C. Sensors can directly control other circuits in system to offload requirements in MCU. Equipped with I2C/SMBus compatible serial interface, ICs are suited for consumer, industrial, computer, and medical applications.

Datapaq Inc.    Wilmington, MA 01887
Mar 02, 2011 To help optimize manufacture of electronic assemblies, Model PA2200A uses 2 sensors to monitor performance of pre-heat stage of process and 3 sensors to monitor dip soldering stage. Dip soldering thermocouples enable monitoring of solder temperature, as well as dwell time in solder, and can be set at different heights to allow for measurement of contact time at various depths. System also generates detailed reports on selective soldering operation.

Ekahau, West Coast    Saratoga, CA 95070
Feb 22, 2011 Respectively, tags TS1 and TS2 feature 1 and 2 extended cable probes that can be installed inside environment where temperature is being measured and have -328 to +302°F range. HS1 tag measures RH up to 100% and temperature ranges from -40 to +185°F. While battery power lasts up to 3 years at 15 min reporting interval, tags can sample temperature/humidity as often as 15 sec or as required. On-board heuristics enable immediate reporting of anomalies that occur between reporting intervals.

Seiko Instruments GmbH    Neu-Isenburg   Germany
Jan 20, 2011 Operating from 1.65-5.5 V, Series S-5855A is connected to DIM pin of LED driver IC to control LED luminance, optimizing safety and efficiency. Unit maintains 100% luminescence up to specified temperature, and once temperature is exceeded, device decreases PWM output duty ratio gradually along with increasing temperature. Available in SNT-4A package measuring 1.2 x 1.6 x 0.5 mm, IC is suited for battery-operated portable equipment such as laptops and tablet PCs.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Jan 12, 2011 Along with integrated controller, thermoMETER CSlaser features double sighting laser that precisely follows IR optical path and marks real spot size at any distance. Smallest spot size of 0.05 mm (M2 version) is reached at crosspoint of both laser beams at 150 mm. While SF version (8-14 µm) has -50 to +975°C measuring range and 50:1 optical resolution, M-2 version (1.6 µm) measures temperatures from 385 to 1,600°C and has 300:1 optical resolution.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Jan 11, 2011 Available in stainless steel housing for applications up to 482°F, 50 mm HT Series offers switching distances of 40 mm and comes in NPN or PNP models. All models that operate above 180°C require external amplifier to function. Sensors are suited for applications where continuous functioning at high ambient temperatures is required, including steel mills, rolling mills, metallurgical and glass industry, and painting plants for automotive industry.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 13, 2010 Featuring integrated controller, thermoMETER CSlaser is available as 8-14 µm SF version with measuring range from -50 to 975°C for general tasks, and as 1.6 µm M-2 model with range of 385-1,600°C for applications in metalworking industry. Two-beam laser aiming feature marks actual spot size at any distance, eliminating faulty measurements on small objects. Capable of measuring at distances up to 150 mm, sensor has scalable 4-20 mA 2-wire analog output and alarm output.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Nov 23, 2010 Combining sensor, signal conditioner, and loop-powered 4-20 mA transmitter in one package, models of TT420-LT series have built-in fitting for ½ in. flexible liquid-tight conduit and grease-fitting (zerk) tap. Products are compatible with 2-wire, 4-20 mA current loops and analog inputs and are FM-approved as Dust Ignition-proof. Models are optimized for applications such as grain handling facility shaft bearing (TT420Z-LT) and belt rub-block (TT420S-LT) temperature measurement.

HBM, Inc.    Marlborough, MA 01752 3014
Nov 22, 2010 Model K-OTC sensor, suited for type K-OL and K-OR optical strain gauges, compensates temperature response of gauges. Based on optical strain gauge applied to aluminum sensor body, it measures thermal dilatation of aluminum and temperature-dependent signal change of fiber Bragg grating, allowing signal of gauge to be compensated by computation. Sensor signal is read into catman®AP software with signals of optical strain gauges, and compensation occurs automatically.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
Nov 22, 2010 Series 176 high-temperature pressure sensors mount to gas turbine combustor to provide operators with diagnostics, part fatigue analysis, and ability to continuously monitor and control emissions. Able to detect and measure pressure phenomena and combustion instability in temperatures up to 986°F, ATEX and CSA certified units also offer sensitivities to 17 pC/psi and ranges from 20-400 psi. High frequency capability enables use of auto-tuning and on-line diagnostic monitoring systems.

Sensirion Inc.    Westlake Village, CA 91361
Nov 15, 2010 Designed to measure relative humidity from 0-100% RH and temperature over range of -40 to +125°C, Model SHT25 achieves typical accuracies of 1.8% RH at 25°C and ±0.2°C with maximum tolerances of 2% RH or ±0.3°C. Unit consumes 3.2 µW at 1 measurement/sec and provides RH response time of 8 sec. Embedded in reflow-solderable DFN 3-0 package measuring 3 x 3 x 1.1 mm, sensor provides calibrated, linearized signals in digital, true I2C format.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Sep 15, 2010 Designed for injection molding of plastics, Type 6188A measures cavity pressure and contact temperature at same point in mold. Wires of Type K thermocouple are threaded through pressure measuring elements directly to front of sensor where they measure direct contact temperature of melt and respond to changes in temperature. Documentation of mold cavity pressure and contact temperature provides end users with reports on stability of manufacturing process and quality of molded products.