Dresser Instrument
Stratford, CT 06614-5145
Aug 22, 2003 The ebroâ„¢ EBI 2 battery-powered data logger senses, records, and displays temperatures from -40 to +167°F and humidity from 5–95% rH. It has memory capacity of 40,000 measurements with recording period up to several years. Metallized housing offers internal or external Pt 1000 temperature sensors with resolution of 0.1°C within accuracy of ±0.3°C ±1 digit. WINLOG 2000â„¢ software is FDA 21 CFR part 11 compliant and allows superposition of up to 5 measurement curves.

Omron Electronics LLC
Schaumburg, IL 60173
Aug 20, 2003 Model D6F features heater between 2 thermopiles that lets unit detect both gas flow velocity and direction. Silicon thermal sensor detects velocities as low as 0.005 m/s. Package styles are available for use in natural or LP gas flow measurement, HVAC system air flows, medical gas applications, and hydrogen. Sensor is suited for fuel cells, chemical test chambers, boilers, and respiration monitors in medical treatment applications.

E Instruments
Trenton, NJ 08638
Aug 12, 2003 IRtec Rayometric 6 non-contact, infrared temperature transmitter provides continuous monitoring with accuracy of ±2% of reading and optical resolution of 6:1. Utilizing Smart Microcontroller technology, IP65-rated unit offers temperature range up to 932°F with linear mV or TCs analog output. Emissivity, response time, and measuring range is configurable from PC. Report of calibration is provided.

Exergen Corp.
Watertown, MA 02472
Jul 28, 2003 By installing IRt/c temperature control sensors and following recommended techniques, users can increase packaging speeds and improve process control in measuring rotating heaters and stationary strip heaters. Sealed sensors do not require power supplies, are designed for use in industrial environments, and can be steam-cleaned. For dusty packaging environments, IRt/c.3X or other IRt/c models with built-in air-purge systems are recommended.

Mikron Instrument Co., Inc.
Oakland, NJ 07436
Jul 23, 2003 Suited for industrial environments, all models in MI-200 Series offer handheld programming module, have stainless steel housings, and are CE approved. Compact, 2-wire MI-N200 models utilize high-resolution optics, have 4–20 mA linear output, and operate in ambient temperatures up to 70°C. Designed to measure temperatures from 300 to 2500°C, MI-S200 and MI-GA200 feature response time of 20 ms, adjustable to 10 s, and LED targeting light.

Omega Engineering, Inc.
Stamford, CT 06907
Jun 12, 2003 RTD, 2-wire OM-MT20 snaps onto handheld computers, enabling users to collect temperature measurement data. After initial software installation, users can set up testing parameters, run tests, and save data directly to handheld unit. Software includes manual and automatic data logging programs. Stored data is transferable from handheld computer to PC and data transferred to PC is in comma separated value file format (.CSV).

RdF Corporation
Hudson, NH 03051 0490
Jun 03, 2003 Model 22493 Rigid RTD Surface Sensor measures surface temperatures in areas where unit may be subjected to vibration and high temperatures. It utilizes strain-free sensing element, constructed with reference-grade platinum, and offers 100 megohms min insulation resistance between outer sensor housing and common lead wires. Sensor can be bolted, welded, or clamped into place on flat mounting surface.

Omega Engineering, Inc.
Stamford, CT 06907
Mar 13, 2003 Model OM-43 measures temperature and relative humidity, while 4-channel Model OM-44 measures temperature, relative humidity, and up to 2 external signals, which can be temperature probes, 4-20 mA signals, or 0-2.5 Vdc signals. Temperature sensor is on 4 in. wire, which is mounted on circuit board inside lid of datalogger case. When inside case it measures ambient air temperature over range of -4 to 158°F, and when outside of case, it measures temperatures from -40 to 248°F.

Mikron Instrument Co., Inc.
Oakland, NJ 07436
Mar 03, 2003 Non-contact MI-N3000 temperature sensor can be used in multiple locations to detect hot spots on moving material. Product can be used on dryers, conveyor belts, webs, and in thermoforming operations to sense temperature variation. Equipped with thermocouple and voltage outputs, unit measures temperatures from 34 to 932°F. It is suited for plastics, rubber, wood, paper, textile, glass and ceramic, paint, varnish, asphalt, and food applications.

Kidde Fire Systems
Guelph, ON N1H7L1  Canada
Feb 05, 2003 Flexible, fixed-temperature LHSâ„¢ fire-detector cable creates alarm conditions when cable's insulation melts and 2 conductors short together. Offered with alarm temperatures of 155, 185, 220, 350, and 465°F, it connects directly to initiating circuit of fire alarm panels. System can locate fire by zone when used with PEGAsysâ„¢ intelligent control panel and discrete addressable LHS cable zones. Applications include belt conveyors, tunnels, aircraft hangars, and classified hazardous areas.

Watlow
St. Louis, MO 63146
Jan 28, 2003 ENVIROSEALâ„¢ RTD sensors employ cold end seal that houses rubber gland and offers temperature rating of -5 to +400°F. Seal provides extreme protection from salt water, motor oil, and chemicals such as bleach, ammonia, and boric and nitrous acid. Combined with sensor's wide temperature rating, units are suitable for refrigeration or condensation units, food processing, industrial ovens, packaging equipment, and environmental control systems.

Mikron Instrument Co., Inc.
Oakland, NJ 07436
Jan 27, 2003 Model MI-500N non-contact, infrared sensor measures temperatures between -40 and 1292°F. It can be equipped with 2 different sensor heads with field of view of 10:1 or 2:1. Unit includes relay contact and alarm, switchable analog output, digital RS232 or RS485 UPP® output, built-in digital peak/valley storage, and adjustable emissivity. Additional model, MI-500 provides built-in illuminated temperature display and 3 pushbuttons for adjustment of parameters.

AMETEK, Power & Industrial Products
Wilmington, MA 01887
Dec 23, 2002 Spectraâ„¢ GT30 solid-state sensor receives UV energy from combustion process and transmits 4-20 mA analog signal proportional to flame intensity. It operates continuously at 257°F without cooling. Able to withstand combustion pressures up to 30 Bar, 2-wire, 24 Vdc loop-powered sensor is self-contained. Hermetically sealed, stainless steel sensor includes dual gain amplifier with saturation limiting circuitry.

TURCK, Inc.
Plymouth, MN 55441
Dec 20, 2002 Brass barrel sensors operate up to 212°F and are available in 3-wire DC 12, 18, and 30 mm sizes in flush or no-flush versions. Climate-proof types come in 12, 18, and 30 mm for temperatures up to 248°F. Units operating up to 320°F include 18 and 30 mm barrel sensors featuring integrated amplifier. All sensors offer noise immunity for industrial applications.

RdF Corporation
Hudson, NH 03051 0490
Dec 19, 2002 Air Sensor, based on platinum resistance temperature technology, provides accurate measurements in controlled chambers, wind tunnels, cargo bays, biological storage, heat exchangers, and exhaust flues. Stainless steel enclosure protects sensor from corrosive environments, while perforated sheath protects sensing element from foreign material. Sensor features less than 0.05°C drift/year at rated service temperature of -130 to 220°C.

Ann Arbor Sensor Systems, LLC
Dexter, MI 48130
Oct 14, 2002 Model A2NCT02 fully calibrated, miniaturized, digital non-contact sensor is housed in TO-5 transistor type package and incorporates infrared lens. Three-pin unit may be used for industrial temperature monitoring, climate control, security systems, laboratory, and remote sensing uses. Its small size and low power consumption allow for adaptation to product applications such as battery-operated test equipment.

Fiso Technologies Inc.
Sainte-Foy, QC G1N 4N6  Canada
Oct 11, 2002 Based on optics and nanotechnologies, MEMS-based HERO temperature sensor produces response times of less than 1 ms. Able to mate with company's optical signal conditioners, with up to 2 Mhz sampling rate, sensor is completely immune to electromagnetic, electrical, microwave, and radio-frequency fields. With 150 micron diameter and 100 micron thickness, it allows low thermal sink effect.

Meriam Instrument
Cleveland, OH 44102
Sep 17, 2002 Model RTD1000 measures resistance of RTD sensor types including platinum, copper, nickel, and iron materials with nominal resistances to 1000 ohms. Designed for use with hand-held MFT 4000 Series Multi-Function Tester, it may connect with 2, 3, or 4-wire RTDs via accessory connectors. Menu feature on MFT selects RTD type, nominal resistance, and alpha value. General-purpose connector with alligator clip terminations provides for temporary connections to installed RTDs.

RKC Instrument
South Bend, IN 46628
Aug 30, 2002 Type K, ceramic-coated ST-55/56 PFA can measure many points in small surface area, or by using adhesive type ST-55, sensor can stick to exact spot for measurement. Accuracy is ±.5%, ±1°C. Typical applications include testing for assessment of parts test equipment, temperature distribution analysis of ovens, LCD test equipment, semiconductor fabrication equipment, and automotive parts testing.

Elan Technical Corp.
Fairfield, CT 06432
May 29, 2002 SHT11 surface-mount chip, measuring 7.5 x 5 x 2.5 mm, contains all measurement functions, including capacitive humidity sensor, temperature sensor, calibration, analog-to-digital converter, and digital 2-wire interface to microprocessors. No external components are needed. It measures humidity in range of 0 to 100%RH with ±3%RH accuracy and temperatures of -40 to 120°C with ±0.5°C accuracy. Drift and stability are less than 1%RH/yr.