JLG Industries, Inc.
McConnellsburg, PA 17233 9533
Mar 26, 2004 SkyAir™ Compressor fits under hood of company's boom lifts and is driven by 7,500 W SkyPower™ generator. It delivers air to platform-mounted regulator through airline integrated into powertrack. Compressor can provide up to 9.3 cfm at pressures of 125 lb/in² to operate ½ in. drive impact wrenches, air hammers, drills, and other tools. SkyAir helps promote job site safety by eliminating dangers from airlines hanging over platform rails.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Dec 11, 2003 Available with ratings from 25–300 hp, Sigma Frequency Control (SFC) compressors provide pressures from 80–217 psig. Variable speed drive compressors achieve maximum efficiency over 34–1,568 cfm flow range and employ direct coupled airend/motor combination. Design allows operation from 100% down to 20% load, and packages include soundproof enclosure, EPAct compliant TEFC motors, and integrated dryer.

Air Squared, Inc.
Hamilton, OH 45011
Nov 21, 2003 Suited for use in laboratory equipment, fuel cells, and mass spectrometers, P5H7 scroll pump measures 1.4 x 1.4 x 3 in., delivers up to 10 psi, and has no load flow of 0.14 cfm. Quiet and vibration-free, it provides compressed air or vacuum source and is available in aluminum or injection-molded plastic models. Device uses spinning scroll technology, can be adapted to pump liquids, and offers oil-free operation for laboratory and medical environments.

Porter-Cable Corp.
Jackson, TN 38302
Jun 11, 2003 Contractor-grade JOB BOSS™ Models C3150, C3151, C3550, C3551 feature 2-port removable console, while C2150 and C2550 are offered as pancake-style models. All units offer High-flo^SM air regulators, High-flo push-to-connect couplers, and pressure gauge. Models C3150/C3151 incorporate oil-free pump design and 2-pole, 3450 rpm induction motor, while C3550 and C3551 employ 2-pole, 3450 rpm induction motor. Model C2150 has oil-free pump design and 4-pole, 1725 rpm induction motor.

Atlas Copco Compressors Inc.
Holyoke, MA 01040 2768
Jun 05, 2003 Single-axle, portable XAS-186JD, powered by water-cooled John Deere 4045 turbocharged diesel engine, weighs 3.47 lb and delivers 375 cfm at 100 psi. Doors grant access to all service points, while integrated toolbox provides storage for breakers and accessories inside lockable canopy. Unit measures 145 x 72 x 71 in. and is also offered in version that delivers 375 cfm at 150 psi working pressure.

Atlas Copco Compressors Inc.
Holyoke, MA 01040 2768
Jun 02, 2003 Housed in low-sound attenuated enclosure, Series GA5-11C mounts vertically to provide clean, dry, compressed air. Available with built-in refrigerant air dryer, oil/water separator, inline air filter, and receiver tank, product produces flows from 31.6–164.4 cfm and has 60–188 psig pressure range. Series is available in floor- and tank-mounted models with optional 80 or 120 gal receiver tank.

Atlas Copco Compressors Inc.
Holyoke, MA 01040 2768
May 21, 2003 Models GA18 and GA30 are 18 kw and 30 kw variable speed drive compressors with flow ranges of 40–114 cfm and 40–159 cfm, respectively. Units are available with integrated refrigerant air dryers, compressed air filters, and con-densate treatment systems. They offer sound level below 71 dB, which allows customer to install compressor at point of use eliminating need for separate compressor room.

Sullair Corporation
Michigan City, IN 46360
Apr 16, 2003 Model LS-20 utilizes one single-stage, 100 hp rotary screw compressor with tapered roller bearings on discharge end and cylindrical roller bearings on inlet. Fluid-lubricated and cooled, product is offered in four models from 344–490 acfm with pressure ratings of 100–175 psig. Features include multi-stage air/fluid separation, flange-mounted motor and air end, and heavy-duty air inlet filter. Microprocessor control monitors/controls essential functions.

Mitsubishi Heavy Industries America - Machine Tool Div.
Addison, IL 60101-1065
Mar 12, 2003 Centrifugal Compressor offers discharge pressure capacity of 450 ata (44.1 Mpa) and suction pressure capacity of 205 ata. It collects crude oil from aging oil fields through injecting compressed natural gas or inert gases below ground. Natural gas can also be stored below ground in oil and gas fields using compressor.

Sullivan-Palatek, Inc.
Claremont, NH 03743
Mar 11, 2003 Compressor, Dryer & Filter Model, rated at 5, 7.5, and 10 hp, provides cool, dry air. Compact compressor design comes with starter, air-cooled oil cooler/aftercooler, air dryer, and inline filter to eliminate moisture and contaminants. Unit is mounted on air receiver with protective devices for high temperature/pressure. Compressor is offered in two versions: open style for ease of maintenance/servicing or enclosed version with reduced noise.

Rietschle Inc.
Hanover, MD 21076 1342
Mar 11, 2003 Quiet operation of oil-less Series 6025 eliminates need for sound insulation. Simple design employs few moving parts, and low pulsation does not require pulsation chamber. Series is available in pressure and pressure-vacuum models and for 60/50 Hz operation. Product provides max continuous and restart pressures to 4.0 psi, max intermittent pressure to 5.5 psi, max vacuum to 7.5 in. Hg, and max flow of 1.5 cfm.

Rietschle Inc.
Hanover, MD 21076 1342
Mar 11, 2003 Vortex series of oil-less piston compressors, for AC and DC voltages have all-aluminum design. Single and three phase compressors have permanently lubricated seal bearings, feature 90° V-design, and are available in 1 1/2 and 2 hp designs. They provide continuous pressure to 125 psi, intermittent pressure to 145 psi, and free flow of 12.93 cfm.

Air Squared, Inc.
Hamilton, OH 45011
Dec 11, 2002 Oil-free Model P18H36 uses pancake-type, brushless DC motor which is 144 mm long, resulting in overall unit size of 9 x 9.4 x 12.3 in. Liquid cooling technique eliminates need for aftercooler and allows temperature rise of only 125°F. Applications include compressed air for medical equipment, fuel cells and natural gas boosters.

Sullivan- Palatek, Inc.
Michigan City, IN 46360 3285
Nov 18, 2002 Direct driven air compressors provide positive alignment and connect directly to motors. Units are available with updraft cooler mounted directly to frame as well as remote cooler packages. Compressors utilize dual oversized air filters and dual spin-on replacement oil filters. Offered with analog or microprocessor controls, instrumentation includes gauges to monitor all functions of compressor operation.

Thomas Products Division
Sheboygan, WI 53081
Sep 10, 2002 Series 3013 is suitable for instrumentation and sampling applications. Compressor has ability to restart against pressure or vacuum. Series is available with dc motors, in 3, 4.5, 6, and 12 V to provide maximum continuous pressure to 2.2 psi, maximum intermittent pressure to 8.7 psi, and maximum vacuum up to 13.5 in. Hg.

Picosecond Pulse Labs, Inc.
Boulder, CO 80301
Sep 03, 2002 Using Non Linear Transmission Line technology, Edge Compressor transforms input signal by compressing leading edge and reducing its risetime. Output rise times are as short as 4 ps. Unit offers edge compression to 70 ps and repetition rates greater than 20 GHz. Sampler features 100 GHz bandwidth, 3 ps aperture, 10 G sample/sec sampling rate, and 1.0 mm connectors.

Honeywell Advanced Composites
Newark, DE 19713
Aug 01, 2002 SHMB 604 reciprocating compressor features fully balanced frame for high-speed applications such as gas injection and gas gathering. Crankshaft matches Gemini cylinders.

Coleman Powermate
Kearney, NE 68848
Jul 31, 2002 PowerBench™, with casters, integrates 95-125 psi air compressor into workbench that can hold up to 300 lbs. Workbench surface is 23 x 48 in. and includes 18 in. wide drawer, air-hose hook, and storage tray. Premium Model includes 6 hp, fully enclosed, oil-free, direct-drive compressor with sound-dampening inserts. Premium Plus Model has 5 hp, fully enclosed, oil-lubricated, belt-drive compressor and twin-cylinder pump.

Coleman Powermate
Kearney, NE 68848
Jul 31, 2002 Trak-Air™ features 8 gallon pancake air tank mounted on top of 4 caster wheels, providing mobility. It utilizes 3 hp universal motor with Invector Technology, which is designed to run cooler and quieter than direct-drive models. Circular handle provides maneuverability.

Coleman Powermate
Kearney, NE 68848
Jul 30, 2002 Invector™ Air Compressors are offered in 6 models ranging from 3.0 hp, on 4 gal pancake tank, to 5.5 hp motor, on 27 gal vertical tank. They include single-path, multi-fin cooling design, providing continuous, focused air flow across motor, belt, and pump. Universal motor requires only half the starting current of traditional induction motors. High-impact shroud covers all moving parts and provides storage for up to 6 air tools.