Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Jul 27, 2010 Available in 15-20 hp models that produce 40-78 scfm at pressures to 217 psig, SK AirCenter series rotary screw compressors have tank-mounted design with small footprint. Split cooling air flow design and insulated enclosure offer quiet operation with noise levels as low as 65 dB. Models are available in wide range of sizes and configurations with stand-alone or integral refrigerated dryers and optional filtration packages.

Atlas Copco CMT USA, Inc.    Commerce City, CO 80022
Jun 24, 2010 Featuring 1,020 cfm capacity at 150 psi, ZoneAir XATS 1020 utilizes 175-gal stainless steel fuel tank for 8 hr of operation at full load. Compressor is driven by Cummins QSM 11 Tier 3 compliant engine with flameproof Pyroban components. Housed in 15 ft DNV container, system also includes Pyroban's 3GP proactive gas detection system, which eliminates need for exhaust flame arrestors. Fully ATEX 94/9/EC certified for Zone 2 hazardous area operation, compressor is suited for oil and gas industry.

Gardner Denver Nash    Trumbull, CT 06611
Apr 19, 2010 Comprised of vacuum pumps and compressors, 2BE4 series is optimized for extended life expectancy and reliability. Inlet and discharge porting promote performance, while cylindrical roller bearings improve load ratings. Available in cast iron and stainless steel construction, products do not require inlet bypass piping in most installations. Also, optional lobe purge piping is available to remove entrained solids and prevent erosion.

Thomas Products Division    Sheboygan, WI 53081
Apr 19, 2010 Measuring 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series brushless DC WOB-L® air compressor and vacuum pump is suited for medical and other applications that require small, lightweight pump. Unit has 1,000-3,000 rpm variable output, while maximum flow is 1.5 cfm at high speed, maximum pressure is 30 psig, and maximum vacuum is 22 in. Hg. It utilizes brushless DC motor, enclosed crankcase to minimize sound, and WOB-L® piston technology.

Davey Compressor Co. Div., Jenny Products Inc.    Somerset, PA 15501
Apr 06, 2010 Powered by 11 hp Honda GX gasoline engine, J11HGA-30P features belt driven single-stage, 4-cylinder J pump, which delivers 21.3 cfm at 100 psi or 20.9 cfm at 125 psi. Unit includes 30 gal air tank, and has special unloading valves and large flywheel for simple recoil starting. Lifting handles integrated into opposite ends of compressor's frame and 2 fully pneumatic tires facilitate maneuvering and positioning around jobsite. Features include manual tank drain and safety relief valve.

Thomas Products Division    Sheboygan, WI 53081
Mar 23, 2010 Measuring 8.3 x 4.0 x 6.4 in. and weighing 9.5 lb, 2450 Series WOB-L® Compressor produces 50 dBA @ 20 psig and features monolithic head that reduces leak paths. Optional intake locations on side and bottom promote plumbing possibilities, boltless construction minimizes vibration and noise, and center-line of gravity mounting options facilitate installation. Max flow for compressors (115 V/60 Hz) is 3.0 cfm, and max pressure is 30 psig; 50 Hz is available as 230/50 AUU.

TriMas Corporation    Bloomfield Hills, MI 48304
Mar 05, 2010 Rated up to 125 hp, Model VRC-CNG is capable of 4 stages of compression, and can be driven by either electric motor or multi-cylinder engine. Two-throw separable reciprocating gas compressor is designed to deliver high pressures required for vehicle fuel systems from commonly available utility natural gas supply pressures at flow rates up to 2 gpm.

Thomas Products Division    Sheboygan, WI 53081
Feb 26, 2010 Measuring 3.8 x 2.64 x 3.63 in. and weighing 1.2 lb, Thomas 230 Series WOB-L® air compressor is designed for applications requiring compact, lightweight pump with variable output. Variable output of 1,000-3,000 rpm is achieved by utilizing brushless DC motor enclosed crankcase for reduced sound (55 dB(A)). Maximum flow is 0.50 cfm when used at high speeds and maximum pressure is 30 psig.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 03, 2010 Available with internal 12/24 V battery charger and jump starter, Trailblazer® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59½ x 20 x 34¼ in. welder provides Stick, MIG, flux cored, AC/DC TIG, and air carbon gouging and cutting.

Next Generation Power Engineering, Inc.    Jacksonville, FL 32246
Feb 03, 2010 Measuring 78 x 30 x 60 in., generator compressor units conserve space and weight by combining two machines into one. Vertically-oriented design option places gen-set on framework over fuel or air tank, enabling compressor to be belt-driven below crankshaft. Powered by 1,800 rpm Kubota diesel engine, units are available from 10-50 kW with 20-100 cfm of air. Schulz compressor is standard, but rotary screw compressor is optional.

Thomas Products Division    Sheboygan, WI 53081
Jan 21, 2010 Featuring BLDC technology, WOB-L Piston Air Compressor can be run at variable speeds from 1,000-3,000 rpm, allowing flow to be varied depending on application requirements. Measuring 4.25 x 4.54 x 3.02 in., 250 Series pump features max flow of 1.0 cfm, max pressure of 30 psig, and max vacuum of 22 in. Hg. It has ½ in. hosed barbed fittings, but is also available with 1/8-28 BSPT threaded ports. Applications include medical, pharmaceuticals, business machines, and instrumentation.

Thomas Products Division    Sheboygan, WI 53081
Jan 21, 2010 Featuring aluminum components that lend to overall weight of 1.9 lb, 260 WOB-L leverages BLDC technology to minimize power consumption. Product runs at speeds from 1,000-3,000 rpm, allowing flow to be varied with application requirements. Optional closed loop controller allows motor speed to be maintained at pre-set, constant speed regardless of load or voltage fluctuations. Also included, 250 Series pump has max flow rates of 1.2 and 1.6 cfm at 2,000 and 3,000 rpm, respectively.

Bitzer International    Oakwood, GA 30566
Jan 15, 2010 Specifically designed for R410A, commercial ORBIT 8 Series includes 6 displacements with cooling capacities from 15-40 tons at 60 Hz. Products assist chiller manufacturers in obtaining efficiency levels higher than those required by current standards. It does this via application-specific compressor optimization. Sound level virtually eliminates need for sound jackets, and oil circulation rate of less than 1% promotes system efficiency and reliability.

Boge American, Inc.    Powder Springs, GA 30127
Jan 08, 2010 Designed to monitor, control, and optimize compressed air system, FOCUS Controller uses pressure sensor to control whether requested pressure within compressor station has been achieved. User can preset min/max pressures and control operation according to demand. In addition to remote On/Off facility and local/remote control via key switch, controller includes backlit LCD that shows error/maintenance messages, operating states, and all operating parameters.

Newport Corp.    Irvine, CA 92606
Jan 04, 2010 With noise rating of 30 dB(A) @ 1 ft, ACWS can supply air to any Newport IsoStation(TM) workstation or SmartTable(TM)-OTS® system. Tank is large enough to supply air for up to 3 workstations, and all required hardware - safety valve, gauges, outlet port, fittings, and drain - comes standard. Also equipped with 5 micron air filter/regulator, system operates intermittently, based on air usage, and is monitored by sensor that maintains reserve tank's preset minimum pressure.

Sullair Corporation    Michigan City, IN 46360
Nov 13, 2009 Featuring capacities from 457-980 acfm and pressure ranges of 100-175 psig, 200 hp compressors include models with choice of constant speed drive (LS-200S) or constant speed drive with variable capacity control (VCC-200S and VCC-250S). Variable Capacity Control allows compressor to match pressure and capacity with system demand. Also available, Variable Speed Drive model (V-200S) offers capacities from 576-967 acfm and features flange-mounted motors and air ends.

Atlas Copco Compressors, Inc.    Westfield, MA 01085
Nov 05, 2009 Small oil-injected screw compressors of GA 5-11/GA 5-15 kW Variable Speed Drive (VSD) series optimize free air delivery and offer noise levels as low as 60 dB. Available in ~40 different configurations to meet facility needs, compressors have standard operating range to 46°C. Elektronikon® in GA 5-15 VSD provides remote online monitoring, and control algorithms of VSD create additional average energy savings when compressed air demand is fluctuating.

Boge American, Inc.    Powder Springs, GA 30127
Nov 04, 2009 Boge CL 10 and CL 20 screw compressors feature high-performance damping and lamellar graphite casting which ensure silencing that produces sound pressure levels as low as 59 dBA. Featuring compact design suitable for workshop environments, devices are available in standard pressure of 150 psi and with output capacity range from 37-79 cfm. Components and parts are accessible from one point, simplifying service and maintenance.

Sullair Corporation    Michigan City, IN 46360
Nov 03, 2009 Rated 100-600 hp, 2-stage TS Series Tandem Rotary Screw Compressors offer choice of constant speed drive Models TS-20, TS-32, and TS-32S with capacities of 500-3,000 acfm, or Variable Speed Drive Models V-200TS and V-320TS with capacities of 495-2,310 acfm. Pressures for all models range from 100-175 psig. Multi-Stage Air Fluid Separation with dual nested Optimizer(TM) separator element minimizes fluid carryover, while Optimalair(TM) heavy-duty air intake filter provides inlet filtration.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Oct 16, 2009 Featuring 2 independently operating compressors, HSD compressor delivers flows from 1,632-3,002 cfm and pressures from 100-217 psig. Each HSD incorporates 2 individual compressor units including motor, Sigma Profile airend, separator aftercooler, draintrap and filtration. Sigma Controls, connected via Profibus, allow for full automatic monitoring of critical operating and maintenance indicators.