Mi-T-M Corporation    Peosta, IA 52068
Jun 07, 2013 Powered by 688cc Honda OHV engine with electric start, Model AGW-SH22-20M combines cast iron 2-stage compressor, with 29.0 cfm rating; industrial 5,000 W generator, with AC output of 4,500 W and alternator wattage of 4,500 W; and 220 A arc welder. Frame features powder-coated, ASME-coded, 20 gal receiver tank; ¼ in. base plate; and 14 gauge, powder-coated, 4-piece belt guard. Other components include belt tightening system, regulator and gauges, 16.5 in. fly wheel, and 10 gal fuel tank.

Schutte & Koerting    Trevose, PA 19053
Apr 09, 2013 Unlike potentially hazardous motor-driven devices, S&K Gas Jet Compressors are ejectors that utilize jet of high-pressure gas as operating medium to entrain low-pressure gas, mix the two, and discharge at intermediate pressure. Gases can be steam, air, propane, or others. Compressors are suitable for use in process, paper, petroleum, power, gas and other industries to circulate steam, boost low-pressure steam, and to mix, transfer, and compress gases.

Tamturbo Oy    Tampere 33100  Finland
Apr 09, 2013 Featuring direct drive from high-speed motor to turbo impeller, and Active Magnetic Bearing that removes physical contact between parts, Air Turbo Compressors minimize wear compared to conventional ways of producing oil-free air. Units save energy and eliminate need to change and dispose of oil filters. In addition, capacity control method extends efficient control range of turbo compressors by dozens of percentage points, lowering electricity bills.

Mi-T-M Corporation    Peosta, IA 52068
Feb 25, 2013 Along with a 136cc Mi-T-M engine, the AC1-HM04-05M 5-gallon, single-stage, gasoline air compressor features twin tanks in a powder-coated steel frame roll cage with double-handled carrying capability. Its compressor creates air displacement, pressure, and flow at 4.4 cfm @ 100 psi, and its compressor pump features an oil lubricated crankcase, aluminum head for heat dissipation, cast iron cylinder, stainless-steel braided discharge hose, and canister inlet air filter.

GE Co.    Southfield, MI 48034
Feb 05, 2013 Featuring one impeller, 2 magnetic bearings, and no split parts, single-stage Integrated Compressor Line (ICL) is designed for low-pressure ratio (1.1–1.4) applications. Design minimizes electric power consumption and offers full access to critical components. Utilizing centrifugal compression, electric motors, and variable speed drive, integrated system offers power range of 2–15 MW, design inlet pressure of 20–80 bar, discharge pressure up to 120 bar, and max speed of 18,000 rpm.

BITZER US Inc.    Flowery Branch, GA 30542
Dec 18, 2012 With ESEER (European Seasonal Energy Efficiency Ratio) of over 5, CSV series intelligent compact screw compressor meets requirements of EMC directive. Variable speed with integrated frequency inverter maximizes energy efficiency, while refrigerant-cooled electronics promote operational reliability and maintenance-free operation. Used in chillers for air conditioning systems, in heat pumps, and in industrial and process cooling, product communicates with master control via Modbus.

Thomas Products Division    Sheboygan, WI 53081
Dec 17, 2012 Designed for handheld gas and leak detection warning devices, 1010 Series has been tested for 4,000 hours of nonstop operation. Units feature sealed air path for contamination-free analysis and restart option at low temperatures for use in cold environments. Low inductance level and stall current allow for compliance with intrinsic safety requirements. Weighing just .03 lb, pumps provide max continuous pressure rating of 8.7 psi and max vacuum to 14.8 in.Hg.

Gardner Denver    Quincy, IL 62301
Oct 23, 2012 Manufactured with die-cast aluminum components, 319 Series Oil-less, WOB-L® Piston DC Pump and Compressor feature corrosion-resistant e-coated exterior finish, stainless steel inlet valve, thermally protected motor, and inlet filter/exhaust muffler. RoHS-compliant units provide up to 150 psi max intermittent pressure and 93% local barometer of max vacuum. Also available with 12 and 24 Vdc motor and dryer/solenoid, series is suited for air suspension, air doors, air horns, and air brakes/clutches.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Oct 15, 2012 Combining rotary screw airend and Mercedes Benz diesel engine, Mobilair M350 provides compressed air with minimal emissions and fuel consumption for construction sites and other applications such as demolition, sand blasting, and sprinkler irrigation. Towable compressor features anti-frost valve, SCR catalytic converter, and viscous fan clutch controlled via Sigma Control Mobile™. Options include various pressures, skid-mounting, and air treatment for cool, dry air.

Emerson Climate Technologies, Inc.    Sidney, Oh 45365-0669
Sep 04, 2012 Suited for 1-4 hp applications, Copeland Scroll(TM) ZSKA Compressor covers evaporating temperatures from -25 to 45°F and is compatible with variety of refrigerants, including R-404A, R-507, R-134a, R-407A/C, and R-22. Axial and radial scroll compliance optimizes liquid handling capability, while hermetic design minimizes leak potential. Compressor is recommended for walk-in refrigerators and freezers, as well as soft serve machines and frozen beverage machines.

Thomas Products Division    Sheboygan, WI 53081
Aug 27, 2012 Picolino Rotary pump and compressor are designed for applications such as medical, vacuum lifting, laboratory, air sampling, sewage aeration, and printing. Pulsation-free pump comes in 2 configurations: DTE (pressure), with inlet silencer, pressure relief valve, and outlet tube connector, and VTE (vacuum), with outlet silencer and tube connector. Respectively, max ratings for flow, pressure, and vacuum are 2.06-7.6 cfm, 14.5 psig, and 25.1 in. Hg.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Jul 19, 2012 Providing 900 cfm at 125 psig, 288 hp Mobilair(TM) M250 features Mercedes-Benz diesel engine and is designed for facilitated towing and maneuverability. Standard version weighs less than 7,000 lb, anti-frost valve maintains optimum operating temperature while also preventing tool freeze-up, and fuel tank size enables extended operation. Options include pressures to 205 psig and air treatment to meet demands of applications such as concrete repair.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Jul 05, 2012 Equipped with 3-cylinder, 21 hp Kubota diesel engine that complies with Tier 4 emissions standard, Mobilair(TM) M27 has rotomolded polymer canopy that is scratch- and dent-resistant, and heavy-duty chassis for further protection from elements and corrosion. Come winter, anti-frost valve maintains optimum operating temperature. Mobilair(TM) M27 features tool box for storage, and is available as skid-mounted utility model for cross mounting on service vehicles.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Jun 25, 2012 Employing 3-cylinder, 21 hp Kubota diesel engine compliant with Tier 4 emissions standards, Mobilair(TM) M27 has maneuverable design and rotomolded polymer canopy that resists scratches and dents. Heavy-duty chassis offers protection from elements and corrosion, while anti-frost valve maintains optimum operating temperature in winter conditions. Tool box is supplied as standard for storage, and compressor is available as skid-mounted utility model for cross mounting on service vehicles.

Atlas Copco Compressors, Inc.    Westfield, MA 01085
Jun 22, 2012 Combining oil-injected screw element and load/unload regulation, 10 hp Model GX 7 EP is suitable for small industrial applications and can be installed directly into workplace. Unit discharges cooling air from top, which permits placement in corner against wall. Available in floor- or tank-mounted variants, Model GX 7 EP features optional integrated dryer.

VMAC Div., Mangonel Corp.    Nanaimo, BC V9X1R3
Apr 26, 2012 RAPTAIR60 is stand-alone diesel drive air compressor that delivers 60 cfm at 100 psi. Mobile compressor measures 18 x 34.5 x 28 in and weighs 450 lbs. Device turns itself on and off in response to air tool demand, reducing idling and fuel costs and offering greener environmental profile. Utilizing integrated digital control system, 100% duty cycle compressor is designed specifically for mobile market.

Next Generation Power Engineering, Inc.    Jacksonville, FL 32246
Apr 24, 2012 Powered by 4-cylinder, turbocharged Kubota industrial diesel engine, Gen-Air-Ator combines 35 kW Stamford Newage diesel generator with 10 hp Hydrovane rotary vane compressor producing 35 cfm at 150 psi. Running both components at 1,800 rpm as one rigid assembly minimizes vibration and noise, and eliminates need for heavy mounting frame. Measuring 87 x 23 x 36 in., Gen-Air-Ator is suited for spray foam and coatings operations.

VMAC Div., Mangonel Corp.    Nanaimo, BC V9X1R3
Apr 19, 2012 Producing 70 cfm and 175 psi, UNDERHOOD70-G air compressor employs an adjustable automatic engine control and digital setup on LCD control box display. Designed to address truck idling, emissions, service intervals, fuel consumption, wear and tear and longevity challenges, compressor turns truck off when air is not being used then turns truck back on when air is needed again. System is designed for Ford 6.7L powerstroke diesel engines with additional applications forthcoming.

Thomas Products Division    Sheboygan, WI 53081
Feb 15, 2012 Designed for air seats, light-duty air suspension, and other mobile applications, Thomas 135 Series DC WOB-L® compressor is 4.34 x 1.66 x 3.6 in., 1.6 lb, intermittent-duty pump manufactured with plastic components. Series includes 12 and 24 V versions, which feature oil-less and non-lube piston and cylinder as well as stainless steel and silicone valves. Balanced design of both versions lends to smooth operation with minimal vibration.

Emerson Climate Technologies, Inc.    Sidney, Oh 45365-0669
Feb 03, 2012 Serving stand-alone and parallel systems with large (7.5-15 hp) refrigeration requirements for low- to medium-temperature applications, Copeland Scroll® K5 refrigeration compressor incorporates 2 features that promote system efficiency. Variable volume ratio technology optimizes low-condensing performance, while vapor injection capability maximizes capacity at low set points without adding more/larger compressors. CoreSense(TM) technology allows on-site/remote diagnostics to help reduce downtime.