Mi-T-M Corporation
Peosta, IA 52068
May 11, 2005 Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as 12 ft jumper hose with quick connect.

Bryan Steam LLC
Peru, IN 46970
May 04, 2005 Able to operate with water or steam on tubeside, U-Tube Tank Heaters are offered in 2- and 4-pass designs and can be installed in new or existing hot water tanks. Instantaneous heaters, ranging in size from 4–12 in. dia with lengths to 10 ft, feature cast iron heads, copper tubes and baffles, and steel tube sheets and bolting. Applications including service water, space heating, radiation, and various other processes.

VECTOR CoGen, LLC
Carson City, NV 89706
Mar 08, 2005 Powered by natural gas or propane, 15 kW VC-15 generator allows multi-family facilities to produce on-site power and hot water. Unit uses whisper-quiet, internal engine to spin generator. Water that cools engine is afterwards circulated through heat exchanger, producing pre-heated water that is fed into facility’s boiler or water heater. Unit can also function as backup generator during power outages.

Armstrong International, Inc.
Three Rivers, MI 49093
Feb 18, 2005 Direct-contact, gas-fired Flo-Direct water heaters are all stainless steel units suited for variety of hot-water applications. Offering heat transfer efficiencies of 98% or greater, units are NSF 5 certified for all food grade water and can operate well with poor water quality. Typical applications include laundries, batch food processes, washdown, parts washers, concrete plants, and boiler makeup water.

Armstrong International, Inc.
Three Rivers, MI 49093
Feb 18, 2005 Flo-Rite-Temp Heaters utilize feed-forward principle of control, eliminating need for temperature sensing devices. Blending valve mounts directly on heat exchanger. Tube bundle features floating head design, which relieves tube stress and allows tubes to be removed for mechanical cleaning. Tubes are 16 ga Admiralty Brass and shell is carbon steel. Using 2–15 psig steam supply, Flo-Rite-Temp units are capable of heating 1–65 gpm of water from 40–140°F.

Lochinvar Corp.
Lebanon, TN 37090
Nov 24, 2004 Copper-Fin® products include combustible floor shield, low-profile draft hood, and electronic intermittent ignition. Boiler features 2-stage firing control system and automatic reset high limit, while water heater includes pump delay/freeze protection and manual/automatic reset high limit. Products also utilize copper finned-tube heat exchanger with gasketless design and cast-iron headers, Loch-Heatâ„¢ ceramic insulation tiles, and stainless steel burners.

Lochinvar Corp.
Lebanon, TN 37090
Oct 22, 2004 Copper-Pak® Commercial Water Heater combines Copper-Fin® water heater with Lock-Tempâ„¢ hot water storage tank available in 85 and 100 gal capacities. All bronze, 1/6 hp circulating pump ensures scale-free heater performance. Built-in draft diverter is contained entirely within heavy-gauge, galvanized steel jacket assembly. Copper-Pak allows tank to be replaced separately from water heater, and heat exchanger is designed to slide out independently.

Bryan Steam LLC
Peru, IN 46970
Oct 14, 2004 With indirect heat exchanger and Incoloy sheathed electric heating elements, Indirect Water Heaters provide scale-free and corrosion-resistant operation. They are available with inputs from 30–330 kW, outputs from 98.3–1,081.1 mbh, and recovery capacities from 117–1,298 gph. Service water being heated circulates only through copper indirect heat exchanger within temperature range that eliminates or minimizes chemical reactions such as oxidation or precipitation.

Benko Products Inc.
Sheffield Village, OH 44054
May 18, 2004 Designed to replace inefficient homemade hot rooms and awkward band heaters, Sahara Hot Box Model SV8 heats up to eight 55-gal drums. It uses steam up to 200 psig and can reach temperatures to 300°F. Also available in electric model, product features 304 stainless steel construction and 90-gal spill containment capacity. Alternative capacities and carbon steel construction are available.

Bradley Corp.
Menomonee Falls, WI 53051
Apr 15, 2004 Express® Lavatory System models in MG- and SS-Series are available with optional electric tankless water heater, which provides hot water on-demand. Eliminating need for separate storage tank, handwashing fixtures with optional heaters are connected to cold water and do not need hot water piping. Factory pre-set at 105°F, flow switch activates heater with 99% efficiency, while micro-processing temperature control maintains temperature accuracy within 1°F.

Leslie Controls, Inc.
Tampa, FL 33637
Jan 30, 2004 Constantemp Heater, available in single and double wall, destroys Legionella bacteria that can grow in hot water systems. Accurate to ±3°F, Constantemp Steam Water Heaters Feed-Forward system heats water to 200°F then blends cold water to achieve set temperature. Product instantly delivers up to 120 gpm and fits through standard doorway. Skid mount systems are available, and set-up requires users to connect water inlet and outlet, steam inlet, and condensate drain.

Applied Energy Recovery Systems
Norcross, GA 30067
Dec 18, 2003 Available for new or existing home water heaters, environmentally sound E-Tech R106K-5 extracts low grade heat from ambient air, upgrades it, then transfers it as energy to heat water up to 130°F. Air passing through unit is cooled and dehumidified and can be used for cooling basements, garages, and workshops. Water heater-mounted units require indoor location with 1,000 ft³ min space, adequate ventilation, and temperature range of 46 to 110°F.

Leslie Controls, Inc.
Tampa, FL 33637
Oct 28, 2003 Safety Shower Water Heater System provides required volume of precisely heated water in any ambient condition, without heated storage tanks. Skid-packaged unit utilizes Constantemp Feedforward Steam Hot Water Heater that is accurate to ±3°F. Continuous recirculation maintains water temperature and prevents lines from freezing. Capacities to 120 gpm are available.

Burnham Corp.
Lancaster, PA 17604
Aug 26, 2003 Porcelain (glass) lined Alliance G combines longevity and corrosion-resistance of porcelain enameled tank and coil with heat recovery of indirect fired water heater. Each tank is surrounded by CFC-free foam insulation and includes aquastat, clean out inspection plate, and sacrificial anode rod. Product is wrapped in steel jacket (40 and 50 gal sizes) or plastic jacket (79 and 100 gal sizes).

Lochinvar Corp.
Nashville, TN 37210 3807
May 13, 2003 Residential water heater, with Shield Combustion Systemâ„¢, employs Lock-Shield flame arrestor plate with 18,000 air louvers that prevent ignited flammable vapors from traveling backwards out of combustion chamber/water heater. Thermal switch detects increases in heat and shuts down gas supply to pilot and main burner. Piezo igniter provides pushbutton ignition of pilot flame, while sight glass allows unrestricted view into combustion chamber for observation of burner and pilot flames.

Leslie Controls, Inc.
Tampa, FL 33637
May 01, 2003 Constantemp heater provides instantaneous hot water at desired temperature. Heat exchanger consists of tube within tube, with air space in between to prevent contamination of potable water by toxic heating substance. Feed-forward blending device ensures hot- and cold-water blend ratio is accurately proportioned to maintain set temperature for flow demands up to 7,200 gph. Integrated fail-safe system prevents overheating/scalding.

FlatPlate, Inc.
York, PA 17404
Mar 27, 2003 DHW Green Hot Water Heater Module, for domestic hot water heating, eliminates cold showers when connected to hydronic boilers. Capacity range is 75,000–400,000 Btu/hr, with up to 1,000,000 Btu/hr available when full boiler hot water heating and fast recovery are required. System module includes heat exchanger, pumps, hand and balancing valves, temperature gauges, control interface and electrical connections.

AMTROL Inc.
West Warwick, RI 02893
Mar 27, 2003 BoilerMateâ„¢ Series tanks have seamless inner corrosion-proof, nonmetallic, polyethylene reservoirs, and CFC-free molded insulation. Dual O-Ring Sealing System for WH-7 and WH-9 Series water heaters provides second seal that protects interior section of water heaters. Dual O-ring offers confirmation of seal and guards against future leaks. If seal is not secure, second O-ring inhibits internal water heater damage caused by internal leaks.

AMTROL Inc.
West Warwick, RI 02893
Mar 06, 2003 Indirect-fired Series WH-7 and WH-9 BoilerMateâ„¢ Classic incorporate sealing system which provides second seal that acts as backup for protection of interior section of water heaters. Sealing system disperses water that leaks down exterior sides of water heater if seal is not secure and inhibits internal water heater damage caused by internal leaks. Products use seamless inner corrosion-proof, nonmetallic, polyethylene reservoirs and CFC-free molded insulation.

Lochinvar Corp.
Nashville, TN 37210 3807
Feb 11, 2003 Commercial Copper-Fin II provides 990,000–2,070,000 Btu/hr and 85% (water heater) and 84% (boiler) efficiency. Unit incorporates independent dual-ignition systems, gasketless heat exchanger, and multiple referenced gas valves. Multiple blowers maintain proper airflow, while built-in sequencer automatically controls each function. With 7 venting options, multi-stack frame unit has fan-assisted combustion process, which produces NOx emissions at rates of less than 30 ppm.