Lochinvar Corp.
Lebanon, TN 37090
Mar 27, 2008 Available in 5 models and sizes, Squire Indirect Water Heater eliminates need for additional gas line, electrical connections, and vent ducts required with direct-fired, tank-type water heaters. Unit features 304 SS heat exchanger coil, 2 in. thick insulation, and plastic jacket that provide rustproof finish, even in wet and corrosive environments. When used with high-efficiency condensing boiler, Squire uses energy generated to heat home to also heat domestic water.

Aqua Products Co., Inc.
Newberry, SC 29108
Jan 04, 2008 Utilizing York® air source heat pump and R-410A refrigerant, Model RCS GREEN Reverse Cycle Chiller(TM) (RCC) can heat water to 115°F and cool water to 40°F. System can be sized to heating requirements of home. Available in 2-3 ton and 4-5 ton capacity models, chiller has optional APCHPL16 Aqua Solar Heat Pipe hot water collectors, which feature 16 glass vacuum tubes with high-intensity film and heat pipe to absorb solar energy.

Lochinvar Corp.
Lebanon, TN 37090
Aug 16, 2007 KNIGHT wall-mounted fully modulating condensing heating boiler features 5:1 turndown burner and adjusts heat output according to demand. Boiler offers an efficiency rating of at least 93%, and permits intake with venting running up to 40 feet using 2 in. pipe. Also features Smart System operating control with user-friendly interface, outdoor reset with sensor, three pump control, night setback, and password security. Optional software enables recording, tracking, and data analyzation.

Lochinvar Corp.
Lebanon, TN 37090
May 24, 2007 Energy Saver Indirect Water Heater(TM) accepts heat from external heat source that warms space heating fluid, which then passes through unit's internal heat exchanger. As fluid passes through glass-coated, conductive tube, heat is shared between space heating fluid and domestic water in storage vessel. This results in 2 supplies of hot water from one boiler. Non-CFC foam insulation maximizes heat retention, while glass-lined steel tank provides clean hot water.

Lochinvar Corp.
Lebanon, TN 37090
Mar 13, 2007 Available in 5 commercial models with inputs from 150,000-500,000 BTU/hr, ARMOR Water Heater is designed to be installed with separate storage tank for protection against harmful effects of lime scale buildup. Along with stainless steel heat exchanger, product is equipped with fully modulating 5:1 turndown burner and SMART SYSTEM(TM) control with built-in cascading sequencer. Water heater can be vented using PVC or CPVC pipe and permits direct-vent distances up to 100 ft.

AERCO International, Inc.
Northvale, NJ 07647
Jan 23, 2007 KC1000 high-efficiency boilers and water heaters support sealed combustion in all climates and can be configured to support dual fuel applications. Using natural gas, 78 x 22 x 57 in. units maintain low NOx emissions over entire 11:1 operating range, and can be used in single unit or modular arrangements. One million BTU/hr condensing units feature control software that integrates with BAS/EMS systems and can be accessed remotely.

Diversified Heat Transfer, Inc.
Ridgewood, NY 11385
Jan 12, 2007 Available in 4 models with 40, 55, 79, and 119 gal capacities, Techtanium Indirect Water Heaters are supplied with 2 magnesium anti-corrosion anodes, exterior steel jacket with powder coat paint, polyurethane foam insulation, and carbon steel tank with oven-glazed titanium glass liner. Units save energy by providing hot water with minimal heat loss.

Heatec, Inc.
Chattanooga, TN 37407
Jan 03, 2007 Designed for ready-mix concrete plants, FIRESTORM(TM) raises temperature of water used to make concrete up to 180°F at flow rates from 20-300 gpm. It uses fully modulating, fired burner and exhibits thermal efficiency up to 99%. Controls are automated using PLC technology, and parts subject to corrosion are made from stainless steel. Offered in various sizes, heaters enable ready-mix plants to extend their working season.

Lochinvar Corp.
Lebanon, TN 37090
Dec 15, 2006 With BTU inputs from 1.5-2 million, Power-Fin 1500, 1700, and 2000 models feature internal cascading sequencer for creating lead/lag system in which lead boiler or water heater controls rotating operation and firing rate of up to 7 additional units. They include 2-line, 16-character LCD, 0-10 Vdc BMS input, and 3-pump control capability. With 5:1 turndown modulating performance, systems can fire from 100% down to 20% of rated input to match demand.

Turbotec Products, Inc., Div. of Thermodynetics
Windsor, CT 06095
Dec 12, 2006 Engineered to minimize water heating equipment load, Enviro-Pak hot water maker and heat recovery unit uses excess refrigeration energy of existing or newly installed air-conditioning or refrigeration systems in 1.5-5 ton range. Unit can be used with R-22 or R410a applications, and can provide increase in SEER for older systems up to 3 SEER points. Offered with white powder coat paint or stainless steel jacket, system includes indicator lights for operational and safety diagnostics.

RBI Water Heaters
Westfield, MA 01085
Nov 07, 2006 With full modulation and 3:1 turndown, Futera Fusion(TM) boiler meets changing demands of environmentally sensitive or green building design. Boiler features solid bronze headers, gasket-less heat exchanger, finned copper or cupronickel tubing, and metal-fiber burner. System automatically adjusts energy input to match heating load without over-firing or wasting fuel. Boiler is 29 in. wide and available in sizes from 500-2,000 MBH.

Cemline
Cheswick, PA 15024
Mar 29, 2006 Vertically packaged SPH Series water heaters provide solution for producing domestic hot water with hydronic boilers including cast iron, copper tube, water tube, or specialty high efficiency condensing boilers. Completely packaged and ready for use, heater is available in range of storage tank volumes from 60-500 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

Hydro-Thermal Corp.
Waukesha, WI 53188
Aug 09, 2005 Usable in any process where instantaneous hot water is required, EZ Heater features 100% energy efficient design that eliminates plugging and fouling issues experienced with heat exchanges. Direct steam injection heater, customized to meet exact requirements, accommodates flow ranges to 600 gpm, can reach temperatures to 350°F, and provides ability to produce up to 250° temperature rise. Self-cleaning functions minimize maintenance issues.

Heraeus Noblelight Inc.
Duluth, GA 30096
May 26, 2005 Ultrapure Water Heater consists of quartz glass twin-tube IR emitter enclosed by larger quartz glass tube with internal gold coating. Offering heating efficiencies exceeding 95%, halogen-free unit can be fit in-line and achieves temperature rises to 80°K depending on liquid throughput and emitter arrangement. Power rating is 6.3 kW for heated length of 600 mm, but heated lengths up to 2 m are possible. Max emission is rated from 900–1,400 nm.

Mi-T-M Corporation
Peosta, IA 52068
May 11, 2005 Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as 12 ft jumper hose with quick connect.

Bryan Steam LLC
Peru, IN 46970
May 04, 2005 Able to operate with water or steam on tubeside, U-Tube Tank Heaters are offered in 2- and 4-pass designs and can be installed in new or existing hot water tanks. Instantaneous heaters, ranging in size from 4–12 in. dia with lengths to 10 ft, feature cast iron heads, copper tubes and baffles, and steel tube sheets and bolting. Applications including service water, space heating, radiation, and various other processes.

VECTOR CoGen, LLC
Carson City, NV 89706
Mar 08, 2005 Powered by natural gas or propane, 15 kW VC-15 generator allows multi-family facilities to produce on-site power and hot water. Unit uses whisper-quiet, internal engine to spin generator. Water that cools engine is afterwards circulated through heat exchanger, producing pre-heated water that is fed into facility’s boiler or water heater. Unit can also function as backup generator during power outages.

Armstrong International, Inc.
Three Rivers, MI 49093
Feb 18, 2005 Direct-contact, gas-fired Flo-Direct water heaters are all stainless steel units suited for variety of hot-water applications. Offering heat transfer efficiencies of 98% or greater, units are NSF 5 certified for all food grade water and can operate well with poor water quality. Typical applications include laundries, batch food processes, washdown, parts washers, concrete plants, and boiler makeup water.

Armstrong International, Inc.
Three Rivers, MI 49093
Feb 18, 2005 Flo-Rite-Temp Heaters utilize feed-forward principle of control, eliminating need for temperature sensing devices. Blending valve mounts directly on heat exchanger. Tube bundle features floating head design, which relieves tube stress and allows tubes to be removed for mechanical cleaning. Tubes are 16 ga Admiralty Brass and shell is carbon steel. Using 2–15 psig steam supply, Flo-Rite-Temp units are capable of heating 1–65 gpm of water from 40–140°F.

Lochinvar Corp.
Lebanon, TN 37090
Nov 24, 2004 Copper-Fin® products include combustible floor shield, low-profile draft hood, and electronic intermittent ignition. Boiler features 2-stage firing control system and automatic reset high limit, while water heater includes pump delay/freeze protection and manual/automatic reset high limit. Products also utilize copper finned-tube heat exchanger with gasketless design and cast-iron headers, Loch-Heat™ ceramic insulation tiles, and stainless steel burners.