Cambridge Engineering, Inc.    Chesterfield, MO 63006
Apr 13, 2012 For reliability and energy conservation, Cambridge M-Series features 100% direct-gas fired combustion efficiency and includes Low-Fire Start Technology as well as stainless steel burners. Products provide year round ventilation and tempered make-up air for commercial and industrial applications. Available with Variable Frequency Drive (VFD) control to respond to varying air needs, indoor and outdoor mounted units offer ratings up to 75,000 cfm and 8,000 MBtuh.

Seats Incorporated    Reedsburg, WI 53959
Jan 17, 2012 Promoting driver comfort in cold climates and even providing therapeutic assistance for back muscle pain, Do-it-yourself (DIY) plug-in seat heater can be installed in less than 5 min and regulates heat to 110°F. U.S.-manufactured, Class 6, 7, 8 truck seating accessory comes ready-to-use. After installation, heater plugs into truck's 12 V accessory/cigarette outlet.

Dana Holding Corporation    Maumee, OH 43537
Oct 28, 2011 Combining thermal bypass valve with active warm-up unit, Long® active and passive warm-up units reduce time needed for engines to meet optimum operating temperature in cooler climates. Units divert wasted heat from vehicle cooling and exhaust systems to heat lubricants, increasing system response time as well as fuel conservation. By maintaining proper oil temperatures, product promotes optimal engine performance and efficiency.

Chromalox    Pittsburgh, PA 15238
Sep 26, 2011 Through versatile mounting configurations in wall or ceiling, HVH Series provides vertical or horizontal airflow. Heaters feature epoxy-sealed elements to minimize false trips on ground-fault equipment. Pilot light indicates normal operation of heater, while outlet screen prevents objects from coming in contact with fan. To facilitate service, heaters provide access to internal components through large door at bottom and removable case front.

Chromalox    Pittsburgh, PA 15238
Jun 01, 2011 Combining anodized aluminum body and cartridge heater, explosion-proof Chromalox XPMC is CSA certified for hazardous locations. Unit comes in 6 and 12 in. lengths, ranging from 120-480 V, and can be ordered with body only or with body and 1 or 2 heat sinks. Two control thermostats enable user to tailor heaters to individual needs. Also, number of fins can be adjusted to achieve wattage and temperature rating customer requires.

Enerconcept Technologies Inc    Magog   Canada
May 02, 2011 Featuring wall-mounted design that simulates glass-like facade, Lubi(TM) produces max output of 254 BTU/h/ft² and temperature increases of up 81°F above ambient outdoor temperatures, making it suitable for pre-heating outdoor air and supplemental heating of facilities. Each 3 x 1 ft polycarbonate panel has 906 perforations, which are dimpled and contoured to prevent rainwater infiltration. Ability to draw air through perforations makes Lubi insensitive to wind speeds of 7 mph or less.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Relocatable roof-mounted fan system heats air that passes through it into workplace from outdoors. Providing air temperature management in many industrial processes, product is suited for use in fiberglass curing, concrete curing, opto- and piezo-electronics assembly and testing, adhesives, as well as urethanes and polyurethanes applications. It is also beneficial for curing rate control of resins and finishes, such as in furniture production.

CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Mar 23, 2011 Equipped with limit controls and heavy-duty core, Ruffneck(TM) FE2 is designed for rugged, industrial applications in harsh environments. Standard features include fan only switch, built-in thermostat, pilot light for HEAT ON indication, and built-in disconnect switch. Available in models that range from 2.5-23.1 kW and 220-440 V, heater also incorporates VacuCore® liquid-to-air heat exchanger and features junction box sized to facilitate installation.

Solar Air Systems    Avon, MA 02072
Feb 11, 2011 Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.

BorgWarner    Auburn Hills, MI 48326
Feb 19, 2010 Installed in air conditioning system and connected to vehicle's 400 V electrical system, cabin heaters achieve 3,000 W output to effectively defrost windshields and provide warm, comfortable driving environment for drivers and passengers. Each is designed with high-voltage connection as well as ceramic components and can be modified for all-electric and hybrid vehicles with various electrical system voltages.

Mitsubishi Electric & Electronics USA, Inc. - HVAC Advanced Products Div.    Suwanee, GA 30024
Oct 27, 2009 Available in indoor and outdoor versions, STAR LINEUP P-Series A30/A36 models feature H2i® hyper-heating capabilities that provide heating down to -13°F. Units also offer moisture removal and optimized HSPF. Ducted PEAD-A indoor model features adjustable return from rear to bottom, quiet operation as low as 30 dB(A), multiple fan speeds, and built-in drain pump.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 29, 2009 Heating power of CE compliant CR027 adjusts to ambient temperature and features integrated adjustable thermostat and control light. It comes equipped with built-in temperature limit in case of fan fire. This compact heater, with PTC semiconductor/resistor, maintains minimum operating temperatures in enclosures and helps to prevent failure of electronic components caused by condensation and corrosion.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 14, 2009 With double insulated plastic housing, CE compliant CSK060 Series can be used in enclosures where condensation needs to be prevented or temperature must not fall below minimum value. It has been designed for permanent operation, and suits use in automotive and petroleum industries. Measuring 3.9 x 1.5 x 3.0 in., heater operates from 120-240 Vac/Vdc and is rated NEMA 2/IP20.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 13, 2009 Offered in double insulated plastic housing, CR030/130 series fan heater comes in DIN rail, panel, or foot mountable unit with integrated adjustable thermostat or fixed hygrostat. Suited for automotive and petroleum industries and applications involving food processing, CE compliant product maintains minimum operating temperatures in enclosures and helps to prevent failure of electronic components caused by condensation and corrosion.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 07, 2009 DIN rail-mountable HVL031 series maintains minimum operating temperatures in enclosures to helps prevent failure of electronic components caused by condensation and corrosion. Comprised of 5 models with ratings that cover 100-400 W range, CE-compliant series utilizes resistance type cartridge heater as heating element and also employs die-cast aluminum heat sink with glass bead finish. Overheat protection is provided via built-in temperature limiter.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Nov 06, 2008 Positive Temperature Coefficient (PTC) Ceramic Heater Pill provides instant heat within seconds of turning on cold car, eliminating idle time, which helps save fuel and reduce emissions. It is mounted in finned metal holder that heats up and warms air moved over its surface, and due to its inherent self-regulating characteristics, unit does not overheat. Heater pill can be used as cold start booster to main heating system, or as rear seat heater in larger vehicles.

Omega Engineering, Inc.    Stamford, CT 06907
Oct 10, 2008 CE compliant HGL Series fan heaters help to protect failure of electronic components caused by condensation and corrosion by maintaining minimum operating temperatures in enclosures. Applications include electrical and electronic enclosures, display panels, access and parking control systems, and personnel booths.

Thomas & Betts Corp.    Memphis, TN 38125
Aug 28, 2008 Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive displacement fuel metering pump, and automatic thermostat-controlled operation.

Marley Engineered Products    Bennettsville, SC 29512
Mar 04, 2008 Designed for concealed and plenum space applications, Berko® and QMark® PRH Series offer multiple heat rise selections, with heating ratings from 3-15 kW. Max outlet air temperature is 200°F at static pressure of 0.2 in. Available with voltages of 208, 240, 277, and 480 V, heaters feature steel-finned heating elements, acoustic fiberglass insulation, and forward-curved centrifugal blower. Small unit is 24 x 19½ x 12½ in., while large cabinet measures 35 3/8 x 18 x 18 in.

MKS    Andover, MA 01810 2449
Feb 08, 2008 Series 48 filter housing heaters are designed for biopharmaceutical processes requiring advanced thermal control of material viscosities and vapor condensation. Integrated temperature controller accommodates higher temperatures for stainless steel housings and lower temperatures for single use housings. Controller is protected by NEMA 4X enclosure, and features digital display for adjusting temperature set points, high/low temperature alerts, and high temperature safety limits.