Armstrong International, Inc.
Three Rivers, MI 49093
Feb 18, 2005 Flo-Rite-Temp Heaters utilize feed-forward principle of control, eliminating need for temperature sensing devices. Blending valve mounts directly on heat exchanger. Tube bundle features floating head design, which relieves tube stress and allows tubes to be removed for mechanical cleaning. Tubes are 16 ga Admiralty Brass and shell is carbon steel. Using 2–15 psig steam supply, Flo-Rite-Temp units are capable of heating 1–65 gpm of water from 40–140°F.

AD Products Co.
Cleveland, OH 44135
Feb 15, 2005 Available in 3 sizes to fit small–medium sized enclosures, ADALET Heater/Cooler protects electrical and electronic components from degradation due to high or low temperatures. It may be used to heat or cool full time, but can be adjusted to switch from heater to cooler using added thermostat controller. Featuring stainless steel design, unit is built to UL NEMA 4X, 12, and 13 standards; has few moving parts; and does not require use of CFCs.

Watlow
St. Louis, MO 63146
Jan 10, 2005 Available in materials such as stainless steel, nickel, Inconel®, aluminum, copper, and bronze, IFC (Interference Fit Construction) heated parts can customized into various shapes and sizes to meet end-user requirements. With FEA (Finite Element Analysis) or iterative prototyping process, heated parts can achieve thermal transfer and temperature uniformity equaling ±1%. All heated part joints can be welded to ensure vacuum-tight seal.

CPI Inc.
Knoxville, TN 37922
Dec 09, 2004 Model RHP-3 controls 1- or 2-zone heating requirements for up to 5,000 sq ft and 100,000 BTU/hr. Unit is pre-engineered, pre-assembled, and pre-wired to assure leak-free operation. Easy mount hanging strip, plug-in electrical connection, and strip thermostat connection facilitate installation. Modular design is expandable to accommodate larger areas.

Lochinvar Corp.
Lebanon, TN 37090
Nov 24, 2004 Copper-Fin® products include combustible floor shield, low-profile draft hood, and electronic intermittent ignition. Boiler features 2-stage firing control system and automatic reset high limit, while water heater includes pump delay/freeze protection and manual/automatic reset high limit. Products also utilize copper finned-tube heat exchanger with gasketless design and cast-iron headers, Loch-Heat™ ceramic insulation tiles, and stainless steel burners.

Indus-Tool
Chicago, IL 60607
Oct 26, 2004 Made of waterproof sealed rubber, Boot Buddy portable heated mat protects floors or carpet from muddy or wet shoes. Plugged into standard 110 Vac outlet, it also heats large areas, eliminating dangers of space heaters. Available in 14 x 21 x 3/8 in. and 16 x 36 x 3.8 in. sizes, Boot Buddy is suited for chilly basements, porches, and garages as well as parking or auto garages, security or toll booths, warehouses, shipping desks, or any unheated area of workplace.

Lochinvar Corp.
Lebanon, TN 37090
Oct 22, 2004 Solution™ high-efficiency boiler features 2-stage firing control system, which allows it to reduce firing rate when full output is not required. Intermittent Ignition Device eliminates need for continuously burning pilot light, and copper finned-tube heat exchanger slides out for maintenance. Additional features include stainless steel burners that can be adapted for natural gas or LP, built-in draft hood, top-mounted water connections, and combustible floor shield.

Lochinvar Corp.
Lebanon, TN 37090
Oct 22, 2004 Copper-Pak® Commercial Water Heater combines Copper-Fin® water heater with Lock-Temp™ hot water storage tank available in 85 and 100 gal capacities. All bronze, 1/6 hp circulating pump ensures scale-free heater performance. Built-in draft diverter is contained entirely within heavy-gauge, galvanized steel jacket assembly. Copper-Pak allows tank to be replaced separately from water heater, and heat exchanger is designed to slide out independently.

Bryan Steam LLC
Peru, IN 46970
Oct 14, 2004 With indirect heat exchanger and Incoloy sheathed electric heating elements, Indirect Water Heaters provide scale-free and corrosion-resistant operation. They are available with inputs from 30–330 kW, outputs from 98.3–1,081.1 mbh, and recovery capacities from 117–1,298 gph. Service water being heated circulates only through copper indirect heat exchanger within temperature range that eliminates or minimizes chemical reactions such as oxidation or precipitation.

Bryan Steam LLC
Peru, IN 46970
Oct 08, 2004 Featuring Incoloy sheathed, resistive type heating elements, BH Series electric hot water or steam boilers are compact, completely packaged and wired units with automatic controls. They are available with inputs from 60–3,000 kW and nominal outputs from 196,000–9,800,000 BTUH. Water boilers are 150 psig MAWP, and steam boilers can be 15 or 150 psig. Each electric element hairpin is field-replaceable without requiring welding, soldering, or brazing.

RBI Water Heaters
Westfield, MA 01085
Aug 10, 2004 Futera II Series boilers offer 7 models ranging from 500-1950 MBH and provide up to 85% efficiency with low NOx levels. Advanced troubleshooting and self-diagnostic control provides step-by-step cycle of operation. Optional brushed SS jacket provides corrosion resistance for indoor/outdoor installations in harsh environments. Boilers suit domestic hot water or hydronic space heating applications.

Burnham Corp.
Lancaster, PA 17604-3205
Jul 08, 2004 Horizontal and vertical hydronic heaters, Series BH and BV, are made with reinforced 18- and 16-gauge cold rolled steel, respectively. Both provide quiet operation and are treated for corrosion-resistance with epoxy-based powder coating. Series BKS kickspace heater uses cross flow fan technology and includes epoxy-based powder coated finish. Panelray features flat tube steel design with broad radiating surfaces. Panelray Towel Warmer heats bathrooms, kitchens, or anywhere decorative heating is desired.

Smith Cast Iron Boilers
Westfield, MA 01085
Jun 15, 2004 Series 28HE cast iron boilers are available in 15 sizes with gross output ratings from 931–4,622 MBH. Usable in water or steam systems, they may be fired with light oil, gas or gas/light oil. Features include heat transfer rods, 3 in. insulated metal jacket, baffled clean out covers, and matched power burners. Boilers offer thermal and combustion efficiencies of up to 86% for oil and 83% for gas.

Benko Products Inc.
Sheffield Village, OH 44054
May 18, 2004 Designed to replace inefficient homemade hot rooms and awkward band heaters, Sahara Hot Box Model SV8 heats up to eight 55-gal drums. It uses steam up to 200 psig and can reach temperatures to 300°F. Also available in electric model, product features 304 stainless steel construction and 90-gal spill containment capacity. Alternative capacities and carbon steel construction are available.

Bradley Corp.
Menomonee Falls, WI 53051
Apr 15, 2004 Express® Lavatory System models in MG- and SS-Series are available with optional electric tankless water heater, which provides hot water on-demand. Eliminating need for separate storage tank, handwashing fixtures with optional heaters are connected to cold water and do not need hot water piping. Factory pre-set at 105°F, flow switch activates heater with 99% efficiency, while micro-processing temperature control maintains temperature accuracy within 1°F.

EnerKon Corporation
Freeport, ME 04032
Mar 23, 2004 Cold Climate Heat Pump™ provides continuous heating down to and below 0°. It uses multiple stages of heating through Bristol® TS Compressor, booster compressor, and economizer. These components, along with Johnson Metasys Control, respond to indoor and outdoor air conditions for both heating and cooling seasons. Coefficient of performance is 2.7 at 17°F and 2.0 at 0°F. Available in 2.5, 3.5, 4.0, and 5.0 ton models, pump uses EPA-approved R-410A refrigerant.

Leslie Controls, Inc.
Tampa, FL 33637
Jan 30, 2004 Constantemp Heater, available in single and double wall, destroys Legionella bacteria that can grow in hot water systems. Accurate to ±3°F, Constantemp Steam Water Heaters Feed-Forward system heats water to 200°F then blends cold water to achieve set temperature. Product instantly delivers up to 120 gpm and fits through standard doorway. Skid mount systems are available, and set-up requires users to connect water inlet and outlet, steam inlet, and condensate drain.

Cambridge Engineering, Inc.
Chesterfield, MO 63006
Dec 22, 2003 S-Series Heater features patented gas burner design and Blow-Thru construction that delivers 160°F max temperature rise. Thru-wall mounting option does not take up floor or warehouse racking space.

Parker Boiler Co.
Los Angeles, CA 90040
Dec 22, 2003 Direct-fired Parker T-6800LR Ultra Low NOx Hot Water Boiler is available in sizes to 6,300,000 BTU Input with bent tube all welded design. Integral finned tube convective section (R Unit) raises efficiencies up to 85%, while NOx levels below 12 ppm at 3% O₂ and CO levels below 100 ppm meet SCAQMD Requirements. LR model has metal fiber burner system that offers even distribution of heat over entire tube bundle area.

Applied Energy Recovery Systems
Norcross, GA 30067
Dec 18, 2003 Available for new or existing home water heaters, environmentally sound E-Tech R106K-5 extracts low grade heat from ambient air, upgrades it, then transfers it as energy to heat water up to 130°F. Air passing through unit is cooled and dehumidified and can be used for cooling basements, garages, and workshops. Water heater-mounted units require indoor location with 1,000 ft³ min space, adequate ventilation, and temperature range of 46 to 110°F.