Allpax Products, Inc.    Covington, LA 70433
Jan 18, 2012 Allpax waste-steam recovery system reduces energy expenditure and water consumption to address overall facility sustainability. In new installations or as retrofit, system captures come-up vent-open waste steam in vented tank where steam condensates into hot (200°F) water that can be used to supplement hot water demands or run through heat exchangers for other plant processes. Vented collection tank is pressure neutral, and heat recovery system with pressure sensors is PLC controlled.

Seats Incorporated    Reedsburg, WI 53959
Jan 17, 2012 Promoting driver comfort in cold climates and even providing therapeutic assistance for back muscle pain, Do-it-yourself (DIY) plug-in seat heater can be installed in less than 5 min and regulates heat to 110°F. U.S.-manufactured, Class 6, 7, 8 truck seating accessory comes ready-to-use. After installation, heater plugs into truck's 12 V accessory/cigarette outlet.

Sioux Corp.    Beresford, SD 57004
Dec 19, 2011 Designed to heat large volumes of water for ready-mix concrete plants, 3 million BTU/hr Sioux Hybrid Water Heater(TM) achieves 208°F outlet temperature at 95% + true efficiency. Media section promotes efficiency, while coil section allows heater to reach elevated temperatures without discharging steam from exhaust stack. Built to ASME Code, water heater ships complete with no assembly required and offers recirculation mode to maintain storage tank water at adjustable temperature setting.

Mokon    Buffalo, NY 14207
Dec 09, 2011 Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA 79 electrical safety standards, and features insulated nonferrous components on chiller side.

Tecogen Inc.    Waltham, MA 02451
Nov 18, 2011 Suited for commercial and industrial sites, High Efficiency Water Heater extracts energy from atmosphere and pumps heat to useful temperatures. Free waste heat from engine is captured and repurposed. Providing 1.2-1.8 coefficient of performance, heater can produce 400,000-600,000 BTU/hr of hot water. Unit offers alternative to conventional systems at facilities with gas demand of 2,000 therms/month or more, such as hotels, swimming pools, hospitals, health clubs, and universities.

powerblanket    Salt Lake City Utah, UT 84104
Nov 11, 2011 In addition to providing heat and preventing freezing on concrete curing projects, Powerblanket® Multi-Duty (MD) heating blankets retain moisture throughout natural hydration process to create wet cure environment that protects against cracking and rapid drying. GreenHeat® Technology uniformly distributes insulated barrier of heat, allowing blanket to thaw frozen ground to 24 in. depth. In tests, concrete under blanket achieves 3,925 psi after 72 hr. Sizes range from 2 x 2 ft to 11 x 23 ft.

Siemens AG    Munich D-80333  Germany
Nov 08, 2011 Rated up to 60 MW, SST-400 GEO combines SST-400 steam turbine gearbox, generator, and base frame with TurboCare steam path technologies. Corrosion-resistant materials prevent fatigue-related crack formation and fractures, and design is suitable for live steam temperatures up to 250°C and steam pressures to 12 bar absolute. Able to be deployed in plants with different thermal fluids, turbine can be used in plants that operate with dry steam, flash principle, or flash/binary combined cycle.

SunPower Corp.    San Jose, CA 95134
Oct 31, 2011 Used in regions with high solar irradiance through direct sunlight, C7 Tracker concentrates sun's power 7X to achieve lowest possible levelized cost of electricity (LCOE) for solar power plants. Solution combines single-axis tracking technology with parabolic mirror rows, reflecting light onto 22.8% efficient SunPower Maxeon(TM) solar cells. While modular solar cell receivers allow performance upgrades, Tracker Monitoring and Control System provides wireless control of power plant.

SunPower Corp.    San Jose, CA 95134
Oct 31, 2011 Integrated with SolarBridge Pantheon(TM) microinverter, E18 and E19 all-black solar panels are respectively rated to 225 and 240 W AC. Generated power is optimized at individual solar panel level, maximizing overall energy yield, and monitored to ensure maximum production. Able to be installed on most homes, even those with complex rooftops or shading from trees, chimneys, and other obstructions, panels feature 22.4% efficient Maxeon(TM) cell technology.

Dana Holding Corporation    Maumee, OH 43537
Oct 28, 2011 Combining thermal bypass valve with active warm-up unit, Long® active and passive warm-up units reduce time needed for engines to meet optimum operating temperature in cooler climates. Units divert wasted heat from vehicle cooling and exhaust systems to heat lubricants, increasing system response time as well as fuel conservation. By maintaining proper oil temperatures, product promotes optimal engine performance and efficiency.

Dunmore Corp.    Bristol, PA 19007
Oct 25, 2011 Designed to meet consumer demand for solar modules that match home exteriors, Black FPE (fluorinated polyester) film consists of black PV backsheet that makes modules resemble skylights. Polyester core, finished with fluorinated layer, combines durability with optimized physical, optical, and electrical properties. Gloss surface promotes efficiency with its solar reflectance, and bond strength for all layers of laminate provides stability under damp heat and freeze-thaw conditions.

Chromalox    Pittsburgh, PA 15238
Sep 26, 2011 Through versatile mounting configurations in wall or ceiling, HVH Series provides vertical or horizontal airflow. Heaters feature epoxy-sealed elements to minimize false trips on ground-fault equipment. Pilot light indicates normal operation of heater, while outlet screen prevents objects from coming in contact with fan. To facilitate service, heaters provide access to internal components through large door at bottom and removable case front.

powerblanket    Salt Lake City Utah, UT 84104
Aug 26, 2011 Utilizing GreenHeat Technology, Wraparound DEF Heaters apply heat to DEF containers externally, enabling safe and consistent warming without compromising chemical integrity of fluid, and eliminating potential for contamination and localized boiling. Standard models are rated to -10°F, while Arctic versions perform down to -40°F. Powered by 120 V, tote heaters are available in 275 and 330 gal sizes with winter-proof and water-resistant outer shell and preset digital thermostat.

Chromalox    Pittsburgh, PA 15238
Jun 01, 2011 Combining anodized aluminum body and cartridge heater, explosion-proof Chromalox XPMC is CSA certified for hazardous locations. Unit comes in 6 and 12 in. lengths, ranging from 120-480 V, and can be ordered with body only or with body and 1 or 2 heat sinks. Two control thermostats enable user to tailor heaters to individual needs. Also, number of fins can be adjusted to achieve wattage and temperature rating customer requires.

Lochinvar Corp.    Lebanon, TN 37090
May 17, 2011 Available in models from 495,000-2,065,000 Btu/hr, Copper-Fin® water heaters use 2-pass heat exchanger and are rated for installation on combustible floors. Control panel, Building Management System connections, and other field connections are positioned on terminal boards at front of unit to facilitate installation and servicing. Also, operator interface panel provides 2-stage electronic temperature control and diagnostic status without opening control panel.

Enerconcept Technologies Inc    Magog   Canada
May 02, 2011 Featuring wall-mounted design that simulates glass-like facade, Lubi(TM) produces max output of 254 BTU/h/ft² and temperature increases of up 81°F above ambient outdoor temperatures, making it suitable for pre-heating outdoor air and supplemental heating of facilities. Each 3 x 1 ft polycarbonate panel has 906 perforations, which are dimpled and contoured to prevent rainwater infiltration. Ability to draw air through perforations makes Lubi insensitive to wind speeds of 7 mph or less.

FANQUIP    Singleton DC   Australia
Apr 07, 2011 Relocatable roof-mounted fan system heats air that passes through it into workplace from outdoors. Providing air temperature management in many industrial processes, product is suited for use in fiberglass curing, concrete curing, opto- and piezo-electronics assembly and testing, adhesives, as well as urethanes and polyurethanes applications. It is also beneficial for curing rate control of resins and finishes, such as in furniture production.

CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Mar 23, 2011 Equipped with limit controls and heavy-duty core, Ruffneck(TM) FE2 is designed for rugged, industrial applications in harsh environments. Standard features include fan only switch, built-in thermostat, pilot light for HEAT ON indication, and built-in disconnect switch. Available in models that range from 2.5-23.1 kW and 220-440 V, heater also incorporates VacuCore® liquid-to-air heat exchanger and features junction box sized to facilitate installation.

Power Partners Inc    GA
Feb 16, 2011 Trigeneration packages enable simultaneous production of power, heat, and cooling from single heat source and are available in generating capacities from 200 kW to 2 MW. Units feature heat and power generation combined with ECO-MAX(TM) adsorption chillers which convert waste heat into chilled water for air conditioning or process use. Generating power using micro turbines, reciprocating engines, or fuel cells, they include skid-mounted cooling tower, pumps, piping, sensors, and chiller.

Solar Air Systems    Avon, MA 02072
Feb 11, 2011 Item No. SAC120CFM, Solar Air Heater Fan with Controller, is factory set to end-user's specification. Using thermistor to constantly monitor inside panel temperature, controller ensures critical airflow matching for optimal efficiency. Solar air heater programmable circuit design enables preset temperature settings, which enable fan to ramp up/down depending on inside panel temperature.