Cooling Equipment ->
(Showing headlines 1 - 20) more ....
Pre-Insulated A/C Linesets accommodate pressures to 600 psi.
Houston, TX 77055
Feb 19, 2014
Available in 65 ft rolls of either ¼ and 3/8 in. diameter or ¼ and ½ in. diameter copper liquid/suction line sizes, Paircoil™ Malleable Linesets expedite installation of ductless mini-split and conventional air-conditioning systems. Industrial-grade insulation features UV- and wear-resistant coating with non-frictional surface to facilitate pulling. White insulation reflects solar heat, is water-resistant, and features hardened, but ductile surface that allows bending without kinking.
Miniature Thermoelectric Modules offer optimal heat dissipation.
Chesterfield, MO 63017
Feb 05, 2014
Built using Tlam thermally conductive circuit boards, Tlam OptoTEC® series is designed for applications where temperature stabilization of sensitive optical components is critical. Circuit boards have thin layer of thermally conductive dielectric material between copper foil layer and metal backing plate. Comprising 7 modules, series can create temperature differential (ΔT) of up to 67°C and pump from 1.5–9.0 W of heat at 25°C. At 85°C, series can create ΔT of 77°C and pump 1.6–9.9 W of heat.
Dedicated Outdoor Air System features VRF technology.
Round Rock, TX 78680
Jan 29, 2014
With airflow rates of 2,000, 1,600, and 1,200 cfm, LG DOAS provides dehumidification of outdoor air using inverter compressor outdoor units. System retains external static pressure up to 1.65 in. and ensures comfort with fan that stays on during defrost cycle. System comes with MERV 8 filters, but can also accommodate up to MERV 14 filters. Seismically certified by California Office of Statewide Planning & Development, LG DOAS suits healthcare, retail, hotel, and residential applications.
Laboratory Cold/Hot Plates heat up to +150°C.
Chicago, IL 60639
Dec 17, 2013
Designed for laboratory research, cascade Model AHP-1200C31 ranges from -50 to +150°C, while single stage Models AHP-1200CPV and AHP-301CPV can reach -15 to +120°C. Thermoelectric systems incorporate temperature controller, data logging software, internal-to-external temperature switching, and RS-232 communications. With no moving parts, maintenance-free systems are suited for cooling and heating of samples, materials testing, histology, and life science applications.
Enclosure Cooling Units offer multiple mounting options.
EIC Solutions, Inc.
Warminster, PA 18974-1157
Sep 16, 2013
With different mounting options, Thermoelectric Air Conditioners for electronic enclosures help users meet varying installation space requirements. Standard through-mount option assures optimum airflow which promotes efficient cooling of cabinet contents. If there is no room in enclosure interior, extension frame mount is available which creates alcove in cabinet panel. Conversely, recessed frame mount places cooling unit entirely within cabinet so that all external enclosure surfaces are flat.
A/C Electronics Enclosure Coolers conserve compressed air use.
Cincinnati, OH 45242-4719
May 16, 2013
Providing protection for electrical and electronic components, Vortex A/C Enclosure Cooler models 7770, 7670, and 7570 offer 5,000 BTU/hr cooling capacity and employ 2-stage cooling system that helps conserve compressed air. Only first cooling stage is used during regular usage, but second cooling stage is activated when cooling demand increases. Additionally, model 7570 is designed for hazardous locations and UL Classified for use in Class I, Div 2; Class II, Div 2; and Class III areas.
Antifreeze/Coolants help protect heavy-duty vehicles' engines.
Danbury, CT 06813
Jan 28, 2013
Prestone Command™ Heavy-Duty Antifreeze/Coolant products include Extended Life formulation, which provides 600,000 mile/12,000 hr CAT EC-1 protection for any diesel-powered heavy-duty engine against temperature extremes, rust, corrosion, scale, and water-pump failure. Extended Service formulation is SCA pre-charged and provides protection from freezing, overheating, cavitation erosion, corrosion, scale, and foaming in any heavy-duty engine with need-release filter technology.
Benchtop Cold Plate System reaches -100°F.
Thermoelectric Cooling America Corp. (TECA)
Chicago, IL 60639
Jan 10, 2013
Designed for laboratory use, LHP-1200CAS Liquid-Cooled Cascaded Cold Plate System provides direct contact cooling down to -70°C, making it suitable for cooling components, materials, chemicals, and samples. Thermoelectric system uses no chemicals and has no moving parts except for fluid. System includes programmable temperature controller with data logging software, hinged cover, and RS-232 communications. For customized control, user can switch between internal or external RTD sensors.
Fluid Reclamation Machine features portable, inline design.
Erie, PA 16506
Oct 15, 2012
Utilizing 3-step process, Hydroflow® SumpDoc™ provides complete coolant restoration and rejuvenation treatment of metalworking fluids in machine tool sump with minimal operator interface. System includes sump cleaner for removal of sludge and solids 50 microns and larger, pleated bag filter for removal of solids down to 10 micron, continuous flow tramp oil coalescer, high speed centrifuge for removal of emulsified tramp oil and fines down to 3–5 micron, ozone generator, and coolant makeup system.
Evaporator Unit limits car cabin temperature rise during idle.
Aichi 448-8661 Japan
Sep 11, 2012
Cold Storage (CS) Evaporator limits increase in vehicle cabin temperature during idle stop when stop/start technology is employed, helping maintain occupant comfort while also increasing vehicle fuel efficiency. Cold insulator, located in heat exchanging area, stores cold energy to be used to cool in-vehicle cabin air while engine and air-conditioning cycle is off in idle-stop state. Closed case features inner fins and internal cold insulation.
Coolant System/Chiller Unit targets metalcutting machinery.
MP Systems, Inc.
East Granby, CT 06026
Apr 23, 2012
Combining chiller and high-pressure coolant system, Model S2 can be integrated with most types of CNC machine tools, including machining centers, turning centers, and Swiss-style lathes. PLC provides real-time monitoring, directs system to respond to changing conditions, stabilizes coolant to ±1° of ambient temperature, and includes 7-day timer clock. When used with water-based coolant, S2 pumps up to 1,000 psi at 8 gpm, and with oils, it reaches up to 2,000 psi at 5 gpm.
Compact, Lightweight Radiator has environmentally friendly design. .
Aichi 448-8661 Japan
Feb 02, 2012
Without compromising on strength or performance, 16 mm wide radiator is sized to afford flexibility for installation in engine compartment while also promoting vehicle safety in case of frontal collision. Tank is made with environmentally friendly plant-derived resin, and efficient heat radiation is achieved via fin design with optimized number of louvers on surface. Material of construction for fins and tubes also promotes to overall efficiency.
Peltier Thermoelectric Cooler delivers precisely controlled refrigeration.
Traverse City, MI 49686
Dec 29, 2011
Able to cool down to 45°C below ambient room temperature, MegaCool225 is designed for large heat pumping applications and accommodates needs of lab refrigerators/freezers and industrial enclosures. Unit may be used as cold plate contact cooler; as 700 BTU air conditioner, with attachment of matched air exchanger; and fluid loop cooler with attachment of matched fluid heat exchanger. Integrated technology also permits contents of enclosure to be warmed up in precise increments of 0.1°C.
Heating and Cooling Systems offer 50-600°F temperature range.
Buffalo, NY 14207
Dec 09, 2011
Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA 79 electrical safety standards, and features insulated nonferrous components on chiller side.
Coolant/Heat Transfer Fluid works with all heating, A/C systems.
GJ Chemical Co., Inc.
Newark, NJ 07105
Aug 10, 2011
Custom-blended to application requirements, GJ Therm provides freeze/burst and corrosion protection in closed heating and air conditioning systems. This industrial coolant and heat transfer fluid, comprised of inhibited ethylene and propylene glycol, is compatible with all manufacturers. Inhibitors remain at full strength despite system dilution requirements, and formula allows mixing with existing systems and topping off or adding to existing fluids without issues.
Cooling Device accommodates extreme packing densities.
CeramTec North America Corp.
Laurens, SC 29360
Jun 03, 2011
Made of aluminum nitride, CeramCool® Box provides efficient cooling for extreme packing densities. Temperature profile is consistent, with thermal conductivity of greater than or equal to 170 W/mK. Electric conductors are placed directly on ceramic heat-sink, forming permanent connection without thermal barriers or risk of delamination. At 1 mm, walls minimize distance between coolant and heat source to optimize heat transfer. Cooling water connections consist of one inlet and outlet.
Cold Plates suit demanding military cooling applications.
Lancaster, PA 17601
Mar 16, 2011
Designed to meet VME64x/VPX standards, Cold Plates are available in 3U, 6U, and 9U formats. Baseline aluminum cold plates are produced from aluminum alloys such as 6061 and 6063 with thermal conductivity values of 166 and 201 W/m. k-Core® models, encapsulating Annealed Pyrolytic Graphite with same aluminum alloys as basic models, deliver up to 6x conductance. Embedded Heat Pipe options are constructed from solid aluminum with integrated heat pipes to remove hot spots.
Coolant-Through-Spindle System retrofits on Fadal VMCs.
MAG IAS, LLC
Erlanger, KY 41018
Aug 25, 2010
Performance rated to 15,000 rpm and 1,000 psi fluid pressure, CYCLO BLAST meets or exceeds CTS tooling requirements for most applications, including deep hole drilling. Non-air driven system minimizes shop air supply requirements because it requires no vacuum pump to keep post bearing cool. System includes rotary union technology, leakproof belt drive and head, and diverter valve that halts coolant flow instantly when pump is shut off and provides instant flow when restarting.
Custom Cooling Assemblies have compact. solid-state design.
Chesterfield, MO 63017
Aug 13, 2010
Cascade Series Thermoelectric Assemblies (TEAs) use multistage Thermoelectric Modules (TEMs) to achieve high temperature differential from ambient. Able to be located directly on actual devices requiring cooling, standard configurations include Air-Air (AA), which uses convection cooling, and Direct-Air (DA), which uses conduction cooling. At temperature differentials greater than 30°C from ambient, cooling capacity is near 60% of max cooling power.
Eco-Friendly Antifreeze/Coolant suits passenger cars and trucks.
Palatine, IL 60067-9910
May 04, 2010
Utilizing Hybrid Organic Acid Technology (HOAT) additive package, Khameleon Universal meets ASTM D3306 specification and mixes easily with other antifreeze and coolants. Solution with recycled ethylene glycol has antifreeze and coolant service life up to 5 yr or 150,000 miles for light-duty vehicles. Available in 55 gal drums and in bulk where available, phosphate-free coolant includes bittering agent to protect children and pets against poisoning from accidental ingestion.
(Showing headlines 1 - 20) more ....
Latest Products in the News
Indexing Technologies Inc. - March 6, 2014
After-Sales Support and Customer Services
Paul N. Gardner Co., Inc. - March 6, 2014
PosiTest® AT Verifier
CFR - March 6, 2014
Speeds Up Every Job
Ultraflex Power Technologies - March 6, 2014
Ultraflex Power Technologies Is Proud to Announce Its Product SuperCast J
Accurex - March 6, 2014
Accurex Announces New Breuckmann Software Release
AMPAC - March 6, 2014
Ampac Products Win Awards for Packaging Excellence, Design, and Innovation
Coxreels - March 5, 2014
COXREELS® Re‐Engineered a Superior Full‐Flow Fluid Path for the 1175 and 1185 Series
Emerson Power Transmission Corporation / Gearing Division - March 5, 2014
New LifeCycle Engineering Services Unit Formed to Increase OEE of Customers' Critical Systems
Michelman - March 5, 2014
Michelman Offers Global Priming Solutions for Biaxially Oriented Polypropylene and Polyethylene Film and Paper Substrates Printed on HP Indigo Presses
Future Electronics - March 5, 2014
Future Electronics Offers Greenliant's eMMC NANDrive(TM) to Replace Industrial SD Cards
More Products in the News...