Active Cooling Unit has corrosion-resistant GRP housing.

October 22, 2015

Intended for cooling small outdoor electronics and instrumentation equipment cabinets in hot and humid climates from -20 to +55C, 75 x 52 x 25 cm MULTICOOL 1100 features glass reinforced polyester (GRP) housing and 1,100 W of cooling power. Self-contained, thermostat-regulated, 38 kg cooling module mounts directly on outside wall of equipment cabinet, and closed-loop refrigeration system does not provide direct air path between ambient environment and inside of equipment cabinet. Read More


Internally Mounted Thermoelectric A/Cs keep enclosures cool.

October 19, 2015

Available in 5 sizes, internally mounted air conditioners are suited for use where enclosure cooling is required but space requirements prohibit external protrusion. Design offers horizontal or vertical mounting completely internal to enclosure, and performance ratings range from 155–390 BTU/hr. Versions for temperature control and different environment ratings are also available. There are no refrigerants, compressors, or moving parts (other than fans). Read More


Pre-Filled CPU Liquid Cooling Unit comes as all-in-one assembly.

August 18, 2015

In addition to EK-Vardar high static pressure fans, preassembled EK-Predator 240 uses G1/4 threaded ports and 10/16 mm Zero Maintenance rubber tubing (EK-ZMT) that support expansion with custom loop gear. Predator 360 further integrates Quick Disconnects for tool-less expansion without draining. Assembly incorporates radiator dampeners; Supremacy™ MX CPU water block; CoolStream™ PE radiator (240 or 360 mm); DDC 6 W liquid cooling pump (PWM controlled); and integrated fan splitter hub. Read More


Oil Coolers efficiently maximize heat removal.

July 31, 2015

Optimized for heat removing performance and efficiency, Type 202 Oil Coolers also facilitate maintenance by enabling tube bundle to be removed for servicing without breaking any pipeline connections (water and oil). All gasketed or packed joints are visible to facilitate leak inspection, and range of body sizes and baffle arrangements accommodate diverse requirements. Offered in lengths from 20–92 in., coolers handle pressures to 125 psig and fluid temperatures to 200°F.

Read More


Auto-Ranging Thermoelectric Air Conditioner protects electronics.

May 1, 2015

Coolers of Auto-Ranging Series (M105), including ThermoTEC 141, 145, and 151 Series, features auto ranging power capability for operation from 120 or 240 AC power. Auto ranging feature also automatically tracks and optimizes available voltage to provide unimpeded cooling. Manufactured to NEMA 4X standards, air conditioners operate at temperatures up to 140°F and are available with heating option. Design allows integration into existing enclosures or can be configured complete with enclosure. Read More

HVAC, Computer Hardware & Peripherals

CPU Cooler and Fan suit space-restricted systems.

March 20, 2015

With compact heatsink and 14 mm NF-A9x14 PWM fan, NH-L9x65 Cooler stands 65 mm tall, making it suitable for home theater PCs and Small Form Factor cases. Unit provides 4 heatpipes in 95 x 95 mm footprint, guaranteeing 100% RAM and PCIe compatibility on Intel-based ITX mainboards. Available in PWM version, 60 mm NF-A6x25 Fan has NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with Low-Noise-Adapter to reduce max speed during PWM control from 3,000 to 2,300 rpm. Read More

HVAC, Construction Equipment & Supplies

Hydraulic Oil Cooler Attachment enhances skid steer performance.

March 5, 2015

Attached to skid steer cab roof for minimal susceptibility to vibration, back pressure, debris, and impact damage, Cool Flow reduces risk of overheating in skid steers and hydraulically powered attachments in demanding applications and hot work environments. Thermostat-controlled fan automatically provides adequate cooling to system when needed. With 40 gpm max flow capacity, unit allows full hydraulic flow to attachment in either direction without risk of damage to cooler. Read More

Chemical Processing & Waste Management, HVAC

Sample Management System can manage multiple consumable types.

February 17, 2015

SampleStore™ II SE helps laboratories manage small to mid-size sample collections comprised of tubes, vials, and plates with one automated storage solution. Designed for libraries of 50,000–300,000 1.4 ml tubes at temperatures of -20 to +20°C, modular and scalable solution delivers flexibility and cold-chain management across diverse storage applications. Strata® UI facilitates sample storage and retrieval while promoting sample information management, scalability, and integration with LIMS.
Read More


Panel Chiller helps keep components safe.

February 17, 2015

Using filtered compressed air, ChillyBox Panel Chiller keep components in NEMA 4 and NEMA 12 industrial cabinets cool, helping to minimize failure and unscheduled downtime on plant floor. Kit works with any existing control panel and includes ChillyBox Panel Chiller, solenoid, air filter, barbed fitting nut, barbed hose fitting, thermostat, air tubing, and air tubing plug. Read More


Cryogenic Cooling System offers maintenance-free design.

October 23, 2014

Intended for laboratory cryogenic market, CryoTel® Cube incorporates CryoTel GT cryocooler, offering maintenance-free solution that eliminates hassle of handling liquid nitrogen. Unit is mounted on vibration isolation mounts and can operate in multiple orientations with no degradation in performance. Capable of reaching cryogenic temperatures of 40–150 K, system is suited for materials research, high-temperature superconductivity, germanium and IR detectors, laser cooling, and medical devices. Read More

Material Handling & Storage, HVAC

Thermoelectric Air Conditioners cool small enclosures.

June 25, 2014

Measuring 6 x 4.75 x 6.6 in., Models AHP-250 and AHP-270 offer 129 BTU/hr and 161 BTU/hr, respectively. Enclosure coolers are built with industrial or military grade fans and are suitable for range of environments including mil-spec and NEMA-4X enclosures. Offering maintenance-free electronics protection solution for hard-to-access areas, coolers are suited for military cases, mobile electronics, alarm systems, communications, cameras, and even small kiosks. Read More


Thermoelectric Air Conditioners keep electronics cabinet cool.

May 28, 2014

Available for systems with 3-phase power, thermoelectric electrical cabinet coolers offer cooling capacities from 2,200–6,000 BTU/hr and do not require filters, coolant, or chemicals. Only moving parts are industrial- and military-grade fans, and built-in temperature controller offers Eco-Mode for energy conservation. Able to perform in diverse environments, including NEMA-12/-4/-4X, these maintenance-free air conditioners also come in Heat/Cool versions and can be customized. Read More

Material Handling & Storage, HVAC, Electrical Equipment & Systems, Electronic Components & Devices

Filter Fans cool electrical and electronic enclosures.

May 27, 2014

Designed to remove unwanted heat from enclosures and cabinets, VFF Series provides forced convection cooling for computers, power distribution equipment, industrial automation controls, and food/beverage process controls. Fans draw filtered ambient air into cabinet while simultaneously blowing heated air out exhaust. Featuring injection molded, thermoplastic construction, fans provide 11–368 cfm of airflow and will maintain NEMA ratings of 12, 3R, or 4, depending on model. Read More

HVAC, Computer Hardware & Peripherals, Thermal & Heating Equipment, Green & Clean

Dual Tower CPU Cooler provides quiet operation.

April 18, 2014

Featuring 150 mm wide fin-stack and widely spaced heatpipes, Model NH-D15 enables uniform heat distribution for optimal efficiency. Recessed lower fins enable NH-D15 to provide 64 mm clearance for tall memory heatsinks in single fan mode. Cooler also features pro-grade SecuFirm2™ multi-socket mounting system and NF-A15 fans that support PWM for automatic speed control through mainboard. Using supplied Low-Noise Adapter, max fan speed can be reduced to 1,200 rpm for quieter operation. Read More

Material Handling & Storage, HVAC

Electrical Cabinet Coolers are resistant to heat and dirt.

April 16, 2014

By circulating 20°F air throughout electrical enclosures in hot, remote, and/or dirty environments, NEMA 12 Cabinet Cooler® Systems prevent high temperature malfunctions. Cooling capacity of up to 275 Btu/hr suits small electrical enclosures with problematic overheating, and models with 550 Btu/hr capacities are also available. Mounting through standard electrical knockout while maintaining NEMA 12/4/4X rating of enclosure, maintenance-free systems do not have any moving parts. Read More

Material Handling & Storage, HVAC

Hydration Packs help combat worker heat stress.

March 25, 2014

Offering 600D water-resistant polyester shell with 2 L bladder, Chill-Its® Hydration Series provides on-the-go hydration solution for workers in extreme environments. Closed cell insulation keeps water cool for hours while TPE polymer bladder maintains taste of water. Shoulder straps are vented for breathability and have 8 mm EVA foam padding for comfort. For workers who need added protection of staying seen on the job, 5155HV model is available in hi-vis orange as well as lime. Read More

Material Handling & Storage, HVAC, Computer Hardware & Peripherals

CPU Coolers feature pulse width modulation.

January 30, 2014

Compatible with Intel® LGA1366 type CPUs up to 85 W, Freezer 120 Series is available with pulse width modulation, with fan speed changing automatically, based on CPU loading activity. Fan speed operates within range of 800–4500 rpm with maximum airflow of 27.02 cfm and noise range of 0–39 dBA. Measuring 90 x 90 x 26.5 mm, coolers have 2 ball bearings and are rated for 12 V operation. Read More

HVAC, Green & Clean

Thermoelectric Air Conditioner has half ton cooling capacity.

January 24, 2014

Model AHP-6263 is 3-phase, 240 Vac air conditioner configured for use in NEMA-12/-4/-4X environments. Cooling using 86% less energy than active cool mode, Eco-Mode promotes energy conservation via built-in temperature controller that provides passive cooling. Customization is available, as is 250 Vdc version for crane applications.
Read More

Material Handling & Storage, HVAC, Laboratory and Research Supplies & Equipment

Refrigerator Cryostat offers alternative to liquid helium.

January 17, 2014

Operating continuously from 1.5–300 K, Model PTSHI-950-LT 1.5 K offers cryogen-free, turnkey alternative to liquid helium. Top-loading, closed-cycle system features pushbutton sample temperature adjustment and 50.8 ID sample chamber. Capable of achieving 1.5 K in less than 8 hours, system can locate sample in either static exchange gas or vacuum. Applications include neutron scattering, electrical transport measurements, magnetic measurements, optical spectroscopy, and spintronics. Read More


Thermoelectric Air Conditioners keep electronic enclosures cool.

November 11, 2013

Used for cooling electronic enclosures, ThermoTEC thermoelectric coolers offer sustained, peak performance in environments with temperatures as high as 170°F. Select models can be configured to operate in ambient temperatures up to 190°F. NEMA 4X rating enables use indoors or outdoors, while solid-state electronics and lack of moving parts (except fans) minimize maintenance concerns. Sizes range from 200–2,500 BTU, and temperature can be controlled to within fractions of 1°.
Read More