Thermo Fisher Scientific    Newington, NH 03802
Dec 02, 2010 Programmable via intuitive user interface, Polar Series Accel 250 and Accel 500 provide 250 and 500 W of cooling, respectively, and allow user to select optimal set-point for each application. Thermostatic technology enables immediate heating and cooling, while plug-and-play design eliminates lengthy installation processes. Featuring internal reservoir and pump as well as integrated fill port, drain, and site tube, units are suited for chemical reaction control, separations, and spectroscopy.

W. Amsler Equipment Inc.    Richmond Hill   Canada
Nov 30, 2010 Designed for manufacturers of PET containers, preform cooling system utilizes increased air flow in oven to minimize surface temperature of perform, resulting in minimal temperature differential and stress throughout perform. System also aids production of colored bottles. It includes IR short-wave emitters and plenum in which air flow through plenum slots cools each perform directly. Integrated filtered air supply minimizes power consumption.

Thermo Fisher Scientific    Waltham, MA 02454
Nov 24, 2010 Providing temperature range of 5-30°C, ThermoChill I and ThermoChill II come in 24 configurations, enabling users to select required cooling capacity, voltage, and pump size. Floor-standing units include high and low temperature alarms that alert users to temperature deviation. Fill port has large opening and is located at top of unit to facilitate access and filling. Designed for plug-and-play operation, chillers are suited for routine applications where liquid cooling is required.

Laird Technologies    Chesterfield, MO 63017
Nov 01, 2010 Designed to control temperature of coolant in liquid circuit, MRC Series Thermoelectric Recirculating Chiller is regulated with digital temperature controller and is housed inside sheet metal casing. Heat from coolant is absorbed by heat exchanger and dissipated through high-density heat sinks equipped with fans. Operating at universal input voltage of 115-230 Vac, solid-state chiller is suited for integrating into laser or imaging systems with space constraints.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Oct 21, 2010 Available for wide range of common module cases, Liquid Coolers provide heat dissipation capacities up to 6,000 W. Units are fastened to heat sink by means of screws, and mounting surfaces are precisely milled. Threaded holes for fastening modules are provided according to customer's specification. In addition to standard heat sinks, modifications and customized versions are possible.

United CoolAir Corp.    York, PA 17403
Oct 13, 2010 Offering air conditioner capacities are 20, 25, and 30 tons using R-410a refrigerant, Portable Compact Trailer features 2 in. tubular frame, dual axel wheels, hydraulic brakes, and 2 leveling jacks. There are three 20 in. duct collars for supply and return air, and dual refrigerant circuits are provided for reliability along with unit-mounted circuit breaker. Along with standard ESP of 1.5 in., VFD option and drive package for up to 3 in. ESP are also available.

FANQUIP    Singleton DC   Australia
Sep 07, 2010 Featuring stainless steel guards, motors, and brackets for complete rust proofing and cleanliness, Air Circulators are suitable for food production and processing sectors as well as chemical industry. Any components that are not stainless steel are made of inert plastic to eliminate any possibility of contamination to nearby products. Available with 460, 630, and 810 mm blade diameters, dual-speed units are supplied in fixed head or oscillating versions.

Thermo Fisher Scientific    Waltham, MA 02454
Sep 02, 2010 Designed as modular platform, NESLAB ThermoFlex 24000 employs water filters that can be changed while unit is in operation and user interface that facilitates operation. Quick start guide, also included, enables seamless start-up within minutes. Chiller serves markets such as aerospace, industrial, laser, medical, printing, and semiconductor processing.

AutomationDirect.com    Cumming, GA 30040-9905
Aug 31, 2010 Available in 120 and 230 V units, Stratus(TM) Air Conditioners deliver 1,000-8,000 BTU/h and are recommended for harsh environments, washdown areas, and areas where heavy dust, debris, or airborne chemicals are present. NEMA 12 and 4 models are constructed of 16-gauge cold rolled steel, while NEMA 4X units are made of 16-gauge 304 SS. Designed to fit enclosures as shallow as 12 in., closed-loop CFC-free units contain active condensate management system and protective-coated condenser coils.

MAG IAS, LLC    Erlanger, KY 41018
Aug 25, 2010 Performance rated to 15,000 rpm and 1,000 psi fluid pressure, CYCLO BLAST meets or exceeds CTS tooling requirements for most applications, including deep hole drilling. Non-air driven system minimizes shop air supply requirements because it requires no vacuum pump to keep post bearing cool. System includes rotary union technology, leakproof belt drive and head, and diverter valve that halts coolant flow instantly when pump is shut off and provides instant flow when restarting.

Laird Technologies    Chesterfield, MO 63017
Aug 13, 2010 Cascade Series Thermoelectric Assemblies (TEAs) use multistage Thermoelectric Modules (TEMs) to achieve high temperature differential from ambient. Able to be located directly on actual devices requiring cooling, standard configurations include Air-Air (AA), which uses convection cooling, and Direct-Air (DA), which uses conduction cooling. At temperature differentials greater than 30°C from ambient, cooling capacity is near 60% of max cooling power.

Trane    Cincinnati, OH 45215
Jul 23, 2010 Suitable for new/retrofit projects, TVR(TM) (Trane Variable Refrigerant) air-conditioning system accommodates medium-sized hotels, hospitals, schools, offices, and apartments. Centralized design conserves space, and ability to have adjacent rooms at different temperatures or even switched off conserves energy. Modular design allows for phased installation, and digital scroll compressors featuring wide capacity modulation enables system to match total load of building at any time.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jul 20, 2010 CE-compliant digital ETC(TM) (Electronic Temperature Control) Cabinet Cooler® System keeps electrical enclosures cool while minimizing compressed air use. By maintaining constant temperature in electrical enclosure slightly under max rating of electronics, control permits just enough cooling for electronics without going so cold as to waste compressed air. Models for 120 or 240 Vac are available with cooling capacities up to 2,800 Btu/hr.

Mokon    Buffalo, NY 14207
May 10, 2010 Available in air-cooled and water-cooled versions, Iceman portable chiller meets process cooling requirements to 5˚F. Tandem compressor arrangement offers energy efficient design during changing cooling requirements, and microprocessor-based controller provides compressor anti-cycling and lead lag, ensuring equal run time of the 2 compressors. Scroll compressor technology provides quiet operation and refrigerant and process fluid loops are constructed of non corrosive materials.

Safety-Kleen Corporation    Palatine, IL 60067-9910
May 04, 2010 Utilizing Hybrid Organic Acid Technology (HOAT) additive package, Khameleon Universal meets ASTM D3306 specification and mixes easily with other antifreeze and coolants. Solution with recycled ethylene glycol has antifreeze and coolant service life up to 5 yr or 150,000 miles for light-duty vehicles. Available in 55 gal drums and in bulk where available, phosphate-free coolant includes bittering agent to protect children and pets against poisoning from accidental ingestion.

Syrris Ltd.    Royston SG8 5HW  United Kingdom
Apr 16, 2010 Designed to fit on virtually any magnetic stirrer or stirrer hotplate with diameter of 135 mm, Hot and Cold Plate operates from -40 to +160°C and has safety shield that protects user from extreme temperatures. Unit is chemically compatible with anodized aluminum and PTFE coated plate, offering wipe clean surface. It can be temperature controlled by wide range of circulators, and leak-free connection is possible using M16 fittings or Atlas quick circulator connectors.

EXAIR Corporation    Cincinnati, OH 45249-1621
Apr 16, 2010 Cabinet Coolers provide way to purge/cool electrical control panels by circulating cold air to eliminate heat damage and control shutdown. Installed through electrical knockout hole, CE-compliant, UL-listed units convert compressed air to cold, 20°F air without refrigerants or CFCs. Cooling capacities up to 5,600 BTU/hr are available. Compact devices include compressed air filter to keep out moisture or dust and require no maintenance.

Rite-Hite Corp.    Milwaukee, WI 53224
Apr 13, 2010 AirLine(TM) Fabric Air Tunnel delivers balanced ambient airflow where it is needed most to cool people who work in picking, sorting, or light assembly environments. Spot-On(TM) Air Outlets, at 2 in. dia and spaced at 15 in. intervals, are directed at 5 and 7 o'clock positions for most effective distribution of air. Mounted above floor to eliminate clutter and tripping hazards, air tunnel is available in lengths up to 80 ft in 10 ft increments.

Emerson Network Power    St. Louis, MO 63136
Mar 25, 2010 Leveraging hot aisle/cold aisle rack configuration, SmartAisle cooling management solution contains cold aisle to prevent hot and cold air from mixing. Monitoring, control, and communications are provided by Liebert iCOM control system, which provides proper temperature, humidity, and airflow to inlet of servers. This also independently controls variable capacity compressor and fan speed of cooling units. Capable of cooling up to 30 kW/rack, system can be used on raised or non-raised floors.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Mar 15, 2010 Designed to fit most Miller Arc Armor Helmets, CoolBand(TM) reduces under hood temperature by up to 8°F. One battery charge provides up to 6 hr of continuous cooling, and downward and upward air vents provide constant air movement over user's face and head. Offered as belt-mounted cooling system, CoolBelt(TM) reduces under hood temperatures by up to 17°F and offers multiple air speeds with directional air controls. Rechargeable battery pack provides up to 5 hr of operation.